iKrusher VFIREPRO VFire Pro 350mAh Rechargeable Vape Battery Instruction Manual

iKrusher VFIREPRO VFire Pro 350mAh Rechargeable Vape Battery

Specifications:

• Product Name: VFIREPRO 1.0mL
• Capacity: 1.0mL
• Recommended Oil Pre-heating Temperature: 122 degrees Fahrenheit
• Needle Size for Filling: Gauge 16 (or 1.8mm)
• Storage Temperature: 68-77 degrees Fahrenheit

Product Usage Instructions

1. Filling Instructions:

2. Unpackage the product ensuring you have the mouthpiece and cartridge ready. Do not remove the silicone gasket during the filling process. Place the tank vertically upright on a tray.

3. Pre-heat the oil to 122 degrees Fahrenheit.

4. Filling Holes:

   • Fill the oil using a syringe or a machine. The recommended needle size is Gauge 16 (or 1.8mm).
   • Do not block the airflow holes with the oil.
   • Fill the oil according to the tank capacity through the open top, avoiding the center post.
   • When using a needle, insert it to a depth of 2/3 of the oil tank and do not touch the bottom.

5. Cap Placement:
   Cap the mouthpiece onto the cartridge, ensuring it is vertical to the tank and forced evenly. Do this within 1.5 minutes after filling the oil. For thinner consistencies, cap it sooner to prevent leaking.

6. Cooling Process:
   After filling and capping, invert the cartridge upside down to ensure the oil cools away from the coil to prevent leakage. Allow the cartridge to sit upside down for 30 minutes, then flip it right side up for another 30 minutes to fully saturate the coil and avoid dry hits.

7. Storage :
   Store the final product in a dry, cool place that avoids direct sunlight. The storage temperature should be between 68-77 degrees Fahrenheit.

8. Additional Information:
   Once filled, you may notice a difference in volume as the ceramic coil absorbs the oil, creating a headspace in the oil tank with a potential reduction of up to 10%. It is recommended to finish the product within 2 weeks for the best taste

FAQ:

1. Q: How should I store the product?
   A: Store the final product in a dry, cool place between 68-77 degrees Fahrenheit, avoiding direct sunlight.

2. Q: What is the recommended pre-heating temperature for the oil?
   A: The recommended pre-heating temperature for the oil is 122 degrees Fahrenheit.

3. Q: What needle size should I use for filling?
   A: The recommended needle size for filling is Gauge 16 (or 1.8mm).

4. Q: How long should I invert the cartridge during the cooling process?
   A: Invert the cartridge upside down for 30 minutes, then flip it right side up for another 30 minutes.

VFIRE PRO  (1.0mL)

FILLING INSTRUCTIONS

•  Unpackage the product, make sure you have both the mouthpiece and the cartridge ready.
• Do not remove the silicone gasket during the filling process.
• Place the tank vertically upright on a tray.
• Pre-heat the oil to ≤ 122 degrees Fahrenheit.
• Fill the oil with a syringe or a machine, the recommended needle size is Gauge 16 (or <1.8mm).
• Fill the oil according to the tank capacity through the open top, avoiding the center post.
• When using a needle, insert it to a depth of 2/3 of the oil tank and do not touch the bottom.
• Press machine recommended
• Cap the mouthpiece onto the cartridge, make sure it is vertical to the tank and forced evenly.
• Do this within 1.5 minutes after filling the oil. For thinner consistencies, please cap it sooner to prevent leaking.

After Filled

• (If you are using Live Resin or Live Rosin, please skip this step.)
• After filling and capping, invert the cartridge upside down to ensure the oil cools away from the coil. This is to prevent leakage.
• Once the cartridge has been flipped upside down for 30 minutes, flip it right side up for another 30 minutes. This allows the oil to fully saturate the coil and to avoid potential dry hits.
• Store the final product in a dry, cool place that avoids direct sunlight. Storage temperatures should be between 68-77 degrees Fahrenheit.

Additional Info

• Once it is filled, you will notice a difference in volume as the ceramic coil absorbs the oil. This will create a headspace in the oil tank, with a potential reduction of up to 10%.
• Please finish this product within 2 weeks for the best taste.

For any other information, please contact [email protected]
www.ikrusher.com

References

• iKrusher

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>