Jiangsu Huitong Group YKF481 Remote Control Instructions
- June 4, 2024
- Jiangsu Huitong Group
Table of Contents
Jiangsu Huitong Group YKF481 Remote Control
Key overview
Top
- Voice microphone
- Standby / On To switch the TV on or back to Standby.
- To open the Netflix App directly. With the TV switched on or from standby.)
- If you have a Netflix menbership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet.
- To open Netflix, press to open the Netflix App. You can open Netflix immediately from a TV in standby. www.netflix.com
- SMART INFO (Only in Professional Mode ON) To show information provided by the Hotel.
- Youtube To open Youtube.
- Google Cast (Only in Professional Mode ON ) To mirror the content of your mobile device display on to the TV.
Middle
- Google Assistant™ To launch the Google Assistant™.
- Watch List For future use.
- Arrow/navigation keys To navigate up , down , left or right .
- BACK
- To switch back to the previous channel you selected.
- To return to previous menu.
- Mute To mute the sound or to restore it.
- Volume To adjust the volume level.
- SETTINGS To open the settings menu.
- OK key To confirm a selection or setting.
- TV To switch back to watching TV.
- Home To open the Home menu.
- TV GUIDE To open a list of the current and scheduled TV programmes of your channels.
- OPTIONS To open or close the options menu.
- Channel To switch to the next or previous channel in the channel list.
- Clock To display the clock.
Bottom
- color keys Direct selection of options.
- Numbe keys To select a TV channel directly.
- Subtitle To switch subtitles on, off or Automatic.
- TalkBack
TalkBack helps visual-impaired users interact with and enjoy this TV by using spoken word to let him know of what’s on screen.
IR Sensor
The TV can receive commands from a remote control that uses IR (infrared) to
send commands. If you use such a remote control, always make sure you point
the remote control at the infrared sensor on the front of the TV.
Warning: Do not put any objects in front of IR sensor of the TV, it may
block the IR signal.
Cleaning
- Your remote control is treated with a scratch-resistant coating.
- To clean the remote control, use a soft damp cloth.
- Never use substances such as alcohol, chemicals or household cleaners on the remote control.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.