HARDURA HS-17 Stainless Steel Hand Washing Sink Instruction Manual
- May 15, 2024
- HARDURA
Table of Contents
HARDURA HS-17 Stainless Steel Hand Washing Sink
Product Information
Specifications:
- Product: Restaurant Equipment Sink
- Components: Wall Mounting Clip, Sink, Strainer, Lock Nut A, Rubber Washer, Lock Nut B, Faucet Body, Spout
Product Usage Instructions
Step 1: Wall Mounting
Mark the 3 slotted holes of the wall mounting clip and securely attach it to the wall.
Step 2: Installing Sink Components
Place the strainer inside the sink. Use lock nut A, rubber washer, and lock nut B to seal the sink from below.
Step 3: Faucet Installation
Install the spout into the faucet body and fix it into the sink using two pairs of rubber washers and lock nuts. Ensure the hand sink is fixed on the wall clip corresponding to the position of the rear hanging plate.
FAQ
- Q: How do I secure the sink properly?
- A: Use lock nut A, rubber washer, and lock nut B to seal the sink from below, ensuring a secure fit.
- Q: Where should I install the faucet spout?
- A: Install the spout into the faucet body and fix it into the sink through two pairs of rubber washers and lock nuts for proper installation.
Parts List
Installation Instruction
Step1
- Mark 3 slotted holes of wall mounting clip and secure to wall.
Step2
- The strainer goes on the inside of the sink, the lock nut A, rubber washer and lock nut B seal the sink from below.
Step3
- Install the spout into the faucet body and fix it into the sink through two pairs of rubber washers and lock nuts. Corresponding to the position of the rear hanging plate, the hand sink fixed on the wall clip.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>