HARDURA WX24 Stainless Steel Equipment Work Stand Instruction Manual
- June 17, 2024
- HARDURA
Table of Contents
HARDURA WX24 Stainless Steel Equipment Work Stand
Specifications:
- Top Shelf: 1 piece
- Under Shelf: 1 piece
- Legs: 4 pieces
- Screws: 16 pieces
Product Usage Instructions
Step 1: Assembling the Under Shelf
- Insert the legs into the sockets of the under shelf.
- Set the under shelf at the desired height.
- Tighten the set screws to secure the legs.
- If needed, loosen the set screw if it struggles to go in.
Step 2: Assembling the Top Shelf
- Place the tabletop upside down on a soft, scratch-free surface.
- Insert the legs into the tabletop gussets.
- Tighten the set screws securely.
- Turn the table over and adjust the bullet feet as needed to meet your height requirements or compensate for uneven flooring.
- Remove the film from the product before use.
Tips: This product is designed and finished for use in a commercial environment. Surface imperfections such as scratches, scuffs, and indents may be present, which is normal for products of this nature.
FAQ:
-
Q: Can this product be used in a residential kitchen?
A: While it is designed for commercial use, it can also be used in a residential kitchen if preferred. -
Q: How do I clean the product?
A: Use a mild detergent and a soft cloth to clean the surfaces. Avoid abrasive cleaners that may damage the finish.
Assembly Procedure
Parts List
Assembly
-
STEP 1 Insert legs into sockets of the under shelf.
Then set under shelf at desired height and tighten set screws to secure legs. You may need to loosen the set screw if one struggles to go in. -
STEP 2 Place the tabletop upside down on a soft, scratch free surface. Insert legs into tabletop gussets. Tighten set screws securely. Turn table over and adjust the bullet feet as needed to meet your height requirements or to compensate for uneven flooring. Remove the film from the product before use.
- Tips: This product is designed and finished for use in a commercial environment.
- Therefore surface imperfections such as scratches, scuffs, and indents may be found.
- This is normal and to be expected on products of this nature.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>