HARDURA S3C101410-12LR Stainless Steel Kitchen Sink With 3 Compartments Instruction Manual
- June 17, 2024
- HARDURA
Table of Contents
Assembly Procedure
S3C101410-12LR Stainless Steel Kitchen Sink With 3 Compartments
This assembly
procedure to the same series of products.
Parts List
(1) Sink Basin 1pc
| Strainer 1pc (2)
| (3) Socket 4pcs| (4) Round Cross Bar 2pcs
| | (6) Screw 16pcs
---|---|---|---|---|---
STEP
1 Connecting the round cross bars and legs with sockets.
STEP 2
Place the sink basin upside down on a soft, scratch free surface. Insert legs
into the sink gussets.
You may need to loosen a set screw if one struggles to go in.
STEP 3
Tighten all set screws and place the strainer into the sink basin.
Adjust the bullet feet as needed to meet your height requirements or to
compensate for uneven flooring. Remove the film from the product before use.
Tips: This product is designed and finished for use in a commercial
environment.
Therefore surface imperfections such as scratches, scuffs, and indents may be
found.
This is normal and to be expected on products of this nature. 
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>