2BEYL Higround Wireless Mouse User Manual
- May 15, 2024
- HIGROUND
Table of Contents
2BEYL Higround Wireless Mouse
Product Specifications
- Model: Higround Wireless Mouse V1
- Model Numbers: HGMOUSE1, HGMOUSE2, HGMOUSE3
- Connection: Wireless
- Buttons: Left Mouse Button, Right Mouse Button, Scroll Wheel, Side Button 1, Side Button 2, DPI Button, Power Switch
- Indicators: Top Indicator LED, DPI Indicator LED, Dongle Indicator LED
Usage Instructions
Setup
Initial Setup:
- Connect the USB cable to the Wireless Dongle and your PC.
- Turn ON the mouse with the Power Switch.
Pairing:
- Unplug the Wireless Dongle.
- With the mouse powered on, press and hold Left Mouse Button, Right Mouse Button, and Scroll Wheel together for 3-5 seconds. The Top Indicator LED will start blinking.
- Plug in the Wireless Dongle.
- The Top Indicator LED and Dongle Indicator LED will turn Green
when paired.
Usage & Battery
-
Connection Status:
The Dongle Indicator LED will show the connection status of the mouse and Wireless Dongle. -
Battery Level & Charging:
While in use, the Top Indicator LED denotes the battery level. -
Settings
-
DPI Adjustments:
To change the DPI, press the DPI Button. The DPI Indicator LED will light up with different colors indicating different DPI levels. -
LOD – Lift Off Distance:
To adjust the LOD, press and hold Right Mouse Button, Scroll Wheel, and Side Button 1 together for 3 seconds. The Top Indicator LED will flash with different colors indicating different LOD levels. -
Motion Sync:
To enable/disable motion sync, press and hold Left Mouse Button, Side Button 1, and Side Button 2 together for 3 seconds. The Top Indicator LED will flash to indicate the status. -
Polling Rate:
To change the Polling Rate, press Left Mouse Button, Right Mouse Button, and Side Button 2 at the same time and hold for 3 seconds. The Dongle Indicator LED will flash to indicate different polling rates.
FAQ
-
Q: How do I check the battery level?
A: The Top Indicator LED on the mouse denotes the battery level. -
Q: How do I pair the mouse and wireless dongle?
A: Follow the pairing instructions provided in the user manual. Ensure both devices are powered on and follow the steps to pair them successfully.
Higround Wireless Mouse V1
HVIN: HGMOUSE1, HGMOUSE2, HGMOUSE3
User Manual
Overview
- A. Left Mouse Button
- B. Right Mouse Button
- C. Scroll Wheel
- D. Side button 1
- E. Side button 2
- F. Top Indicator LED
- G. DPI Button
- H. DPI Indicator LED
- I. Power Switch
- J. Wireless Dongle
- K. Dongle Indicator LED
- L. USB Cable
Setup
Initial Setup
Connect the L USB cable to the J Wireless Dongle and your PC. Turn ON the
mouse with the I Power Switch
Pairing
The mouse and wireless dongle are already paired out of box. Should you
need to re-pair them, follow these steps:
- Unplug J Wireless Dongle.
- With the mouse powered on, press and hold A LMB, B RMB and C Scroll Wheel together for 3-5 seconds. The F Top Indicator LED will start blinking.
- Plug in the J Wireless Dongle.
- F and K LED will turn Green when paired.
Usage & Battery
Connection Status
The K Dongle Indicator LED will show the connection status of mouse and J Wireless Dongle.
- Green – Connected
- Red – Disconnected / Sleep Mode
- Flashing Blue – Connecting
Battery Level & Charging
While in use, the mouse F Top Indicator LED denotes the battery level.
- 100% – 75% – Green
- 100% – 75% – Green
- 49% – ?% – Orange
- ?% – Red
- Flashing Red?
To charge, plug in L USB Cable to mouse. F Top Indicator LED shows status.
- Slow Blink Green – Charging
- Static Green – Fully Charged
Settings
DPI Adjustments
To change the DPI, press DPI Button. The H DPI Indicator LED will light up:
- 400 DPI – Red
- 800 DPI – Green
- 1600 DPI – Blue
- 3200 DPI – Orange
- 6400 DPI – Purple
LOD – Lift Off Distance
To adjust the LOD, press and hold B RMB, C Scroll Wheel, and D Side Button 1 together for 3 seconds. The F Top Indicator LED will flash:
- 1mm – Cyan
- 2mm – Purple
Motion Sync
- To enable / disable motion sync, press and hold A LMB D Side Button 1 and E
- Side Button 2 together for 3 seconds. The F Top Indicator LED will flash:
- On – Green
- Off – Red
Polling Rate
To change the Polling Rate, press A LMB B RMB and E Side Button 2 at the same B RMB and E Side Button 2 at the same
- 500 Hz – Red
- 1000 Hz – Green
- 2000 Hz – Blue
- 4000 Hz – Orange
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
-
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.