Honeywell L11KEC Personal Protective Equipment Instruction Manual
- May 15, 2024
- Honeywell
Table of Contents
Honeywell L11KEC Personal Protective Equipment
Specifications:
- Manufacturer: Honeywell
- Product Line: Miller Fall Protection
- Model Numbers in Safety Notice: M1010058, L28KEC2.0, M1010118, L11KEC2.0
Product Usage Instructions:
Inspection Instructions:
- Using a pen or small cylindrical rod, insert it into the shock absorber protective pack. Avoid sharp or pointed edges to prevent damage (refer to Picture 1 and Picture 2).
- Create a cavity, remove the pen or rod, and check for stitching inside the absorber. Use a flashlight in dark environments for better visibility (refer to Picture 3).
For Honeywell Partners/Distributors:
If you are a partner or distributor of Honeywell, please ensure the
following:
- Immediately forward this safety notice to your customers/end-users who have purchased the affected products.
- Request compliance with the inspection instructions provided.
- Ensure that your customers further distribute this safety information to their customers/end-users.
Contact Information:
If you need additional information or assistance, please contact Honeywell
Customer Service in your region:
| Region | Phone Number | |
|---|---|---|
| Whole of Australia | +61 1300 139 166 |
HLSHSPAMelbourne@Honeywell.com
Western Australia| +61 89 337 6980|
HLSHSPAPerth@Honeywell.com
New Zealand| +64 80 032 2200|
HLSHSPNZ@Honeywell.com
Return and Liability:
Upon acknowledgment and RMA request within 3 months of receipt of the
safety notice, Honeywell will issue a credit note for affected products
returned due to missing stitching.
We assure you that other Honeywell Miller Fall Protection products are safe to use and not impacted by this notice.
FAQ:
-
Q: How do I identify if my product is impacted?
A: The model numbers included in the safety notice are M1010058, L28KEC2.0, M1010118, L11KEC2.0. Check your product against these model numbers. -
Q: What should I do if I find missing stitching in my product?
A: Contact Honeywell Customer Service in your region for further instructions on returning the affected product and receiving acredit note. -
Q: Are other Honeywell Miller Fall Protection products safe to use?
A: Yes, all other products are safe to use and not impacted by this notice.
May 18th, 2023
Dear Customer,
WARNING! All recipients of this Product Market Action Notice must read, understand and follow all instructions carefully.
While there have been no reported incidents due to this safety issue, Honeywell Personal Protective
Equipment has issued this Product Market Action Notice because the use of
the product could result in serious injury or death.
It is not possible to check the physical stitching without tempering the
protective case of the shock absorber, hence we advise below non-destructive
inspection method to check on the stitches.
The following information provides detailed instructions on immediate actions you are required to take:
- These products must be immediately separate from work area/ field/ stock
- These products must be checked before use as per Instruction below.
Inspection instruction:
- By using a pen or a small cylindrical rod, insert into the shock absorber protective pack. Please do not use any item that has sharp or pointing edges, to prevent damage to the shock absorber (Picture 1 and Picture 2)
- Create a cavity and remove the pen or cylindrical rod, check if there is presence of stitching inside the absorber (Flashlight would be helpful if the surrounding is dark) (Picture 3)
Additional instructions for Honeywell partners/distributors:
- Please immediately forward this safety notice to any of your customers/end-users who have purchased these products with an urgent request that they read and comply with above instructions.
- Please ensure that your customers forward this safety information to their customers/ End users.
For additional information and instructions, you can contact Honeywell Customer Service in your region:
| Region | Phone Number | |
|---|---|---|
| Whole of Australia | +61 1300 139 166 | [ H |
LSHSPAMelbourne@Honeywell.com](mailto:HLSHSPAMelbourne@Honeywell.com)
Western Australia| +61 89 337 6980|
HLSHSPAPerth@Honeywell.com
New Zealand| +64 80 032 2200| H
LSHSPNZ@Honeywell.com
We expect your acknowledgment and RMA request within 3 months of the letter
arriving to you, beyond this period the liability of the product will lie with
you.
Credit note will be issued once the affected product (with missing stitching)
are being returned Honeywell.
We assure you that no other Honeywell Miller Fall Protection products are
impacted, and they are safe to use. Honeywell has been a manufacturer of
industrial personal protective safety products for more than 75 years and our
customers’ safety is ALWAYS our highest priority.
We sincerely apologize for any inconvenience that this situation may cause to
you or your customers and thank you for your continued trust and longstanding
business relationship with Honeywell.
Regards,
Honeywell Miller Fall Protection Team
Table 1: Model numbers included in this Safety Notice:
- M1010058 2M SINGLE KEVLAR WEB LANYARD WITH SS TAK
- L28KEC2.0 2M SINGLE KEVLAR WEB LANYARD W/TAKS 15MM
- M1010118 2M Sgl Kevlar TAK & TA Scaff
- L11KEC2.0 2m Kevlar Single Lanyard w/19mm hooks