Skipsoul AT-156 Portable Monitor User Manual

Portable Monitor
Model:AT156
User Manual

AT-156 Portable Monitor

In order to avoid personal injury, please observe the following precautions:

• Do not place the display on an inclined table unless there are safety measures.

• Do not drop, click or throw objects toys onto the screen, otherwise it will result in personal injury, product damage and screen damage.
  In order to prevent fire and other injuries, please observe the following precautions:

• Please turn off the display when you eave the room for a (ong time.

• Do not allow children to drop or insert items into the display.

• Do not install accessories that are not specifically designed for the display.

• When the display is unattended for a long time, please disconnect the power cable.

• When there i thunder and lightning, please do not touch the power cable and signal line, which may lead to electrical shock.

• Do not let anything press or tangle the power cable.

• Do ot place the display in a place where the power cable could be easily damaged.
  In order to provent the display from potential damages, the following situations should be avoided.

• Place the display in a place where it fals easily.

• Place the display near the radiators or other heat sources.

• The power cable is the main power solation device, which must be placed in an easy-to- operate location.

Do ot rub the screen panel with hard objects, or you will scratch or permanently damage the Lep.
Do not press the LCD screen with your fingers for a long time, otherwise afterglow will occur and the screen will be damaged in serious cases.
Bad dots of red, green and blus pixels may appear on the screen, but the display function is not affected. If possibe, use the recommended image resolution for best results. If any mode other than ~the recommended image resolution is used, an abnormal picture may occur. However, this characteristic of LCD panel with fixed image resolution. still image staying on the screen for a long time may cause damage to the screen and produce afterimage. Please make sure to use the screen saver. The afterimage and related problems are not covered by the warranty.
If you encounter any problem during your use, please contact the professional technical service personnel or distributor.

Introduction to display

Introduction to buttons

• The function button adopts the design of dial wheel and is provided with an independent power button/ return button.
• Press the power button/return button for 3 seconds to turn on/ off the display.
• Press the dial wheel to open the OSD(On-Screen Display)menu of the display. In the menu, move the dial wheel upwards and downwards to control the cursor. Press the dial wheel to confirm, and press the power button/ return button to return.
• Move the dial wheel upwards to open the brightness shortcut adjustment menu and move upwards and downwards to control the brightness.
• Move downwards the dial wheel to open the volume shortcut adjustment menu and move upwards and downwards to control the volume.

USB Type C full-function interface: is responsible for power supply of display, audio and video signal transmission, touch signal transmission, and support for insertion function from both sides.
USB Type C power supply interface: provides support for external power supply and reverse charging function, is compatible with PD2.0 power supply protocol, and supports 5V-20V protocol power supply (5V/34 is recommended).
Mini HOMI port: is responsible for audio and video signal transmission 3.5mm headphone jack: refers to headphone! speaker extension connector

Device connection

1. Connect the computer with full-function Type-C interface The display supports conecting full-function USB3.
   1 Type-C interface with standard wires for extended display or duplicated display. The touch version Z8156 can perform touch operation on the display (system support is required. Some systems are optimized for touch control and can be used in windoews10. Please consult the distributor for details.)

2. Connect the mobile phone with TV-out function The display supports connecting the mobile phone with standard Type- C to Type-C cable, and outputting the screen content of the mobile phone o customizing the Ul interface according to system settings.
   *When there is no external power supply, the mobile phone battery can be used to supply power to the display (the energy-saving mode is started. The brightness is automatically adjusted to 30%, and the user can adjust _the brightness and volume of display according to the output power of the mobile phone. )

• When the external power supply is used, the display can charges the mobile phone reversely through the external power supply (in order to ensure that both the display and the mobile phone can get enough working current, please use charger or power bank with at least 18W or above as the external power supply; higher voltage charger can be able to quick charge your mobile phone). 3. Connect Nintendo Switch When external power supply is connested, the display supports connecting the Switch host with standard Type- C to Type-C cable and switching on the Switch TV mode;
  When external 5V power supply is connected, the external power supply supplies power to. the display. The Switch uses its internal battery to run the program and the display output is 720P.
  When external 15V PD protocol power supply is connected, the external power supply supplies power to both the display and the Switch. The battery of the Switch body is in a charging state, and the display output is 1080P

  4. Connect the computer with HOMI interfaceThe display has a Mini HOMI interface and is compatible with most HOMI devices. The device can be powered on by using computer”s USB 3.0 power supply (Note: power output by some computers’
     USB interfaces may be insufficient) and external 5V/ 2A power supply to power the computer. —(For touch screen model, please use an USB A to C cable to connect the device and the computer. Users may need to equip USB type A to type C cable by themselves.)

  5. Connect multiple HDMI devices

Remarks:

• The right Type C interface is a full-function USB3. 1 interface with power supply function. The left Type C interface is an auxiliory power supply interface. In several, please preferentially select the right Type C interface to power the device.
• When connecting HDMI cable externally, please connect power supply first, then connect HOMI to ensure normal signal transmission.
• When a single cable is connected to the type-C interface on the right, the energy-saving function of the display will be activated, and the brightness will be automatically adjusted to 30% to ensure power supply and save device power. Users can adjust the brightness according to actual usuage.

> Menu(Press UP/down to adjust, menu key confirmation)

1. Image: Note: set the display image display acording to personal preference.
2. Color: Note: set the display image display according to personal preference.
3. visual Note: When piaying games or watching movies, the HOR mode is enabled, and the color picture is Richer
4. Brightness: Note: According to different usage seenarios, different brightness can be adjusted.
5. OSD Setting: Note: You can choose your own language.
6. Misc: Note: set the display image display according to personal preference.

Support phone model:

HonorNotelO
Samsung| S8 / 58+ / S9 / Note8 / Note9
Smartian| R1 / Pro2S
OPPO| R17Pro
More| Updated continuously……

Support computer mondel:

Parameters:

Type C video Output Capability.

Packing list:

Screen| 1| USB to Type-c Cable| 1| Wired Mouse || Option
---|---|---|---|---|---
Mini HD to HD Cable| 1| Case Stand| 1| |
TYPEC to TYPEC Cable| 1| Fower Adapter| 1| |

Common problems and treatment

Q: The display’s light does not work, and the power indicator light also does not work.

A: Press the power button to check whether the display is i the start-up state; Check that the USB cable is properly connected to the display and power supply interface.

Q: The display’s light does not work, but the power indicator light s red.

A Check whether the display and the connected device are in the start-up state; ensure that the USB cable is correctly connected between the display and the connected device; Check the signal line to ensure that no pins are bent. Try to connect other device and eliminate the fault of device; if the fault stil exists, Please contact the distributor or after-sales service staff to resolve the issues.

Q: No signal is displayed on the screen

A: Check whether the signal line is correctly connected to the interface of the connected device; Try to plug and unplug the cables again. The order of (ine connection should be to connect the power supply first and then the signal line.

Q: Imagejumpingor rippleikepattern on the display.

A: Ensure that the cable is correctly connected between the display and the connected device; Remove any electronic device that may cause electronic interference.

Q: The color of the screen image looks incorrect (color block, color eviation, etc ) A: Check the

connected cables to ensure that no pins are bent.

Q: The scroen flickers when displaying content

Az If the screen flickers, we need to consider firstly whether the power supply is adequate. It s recommended that the power adapter of 18W or above should be used for power supply of the display. If the power supply is normal, but the screen flicker issues persist, it is recommended to contact the distributor or fter-sales center.

Maintenance and cleaning

• Tum off the display and unplug the power cable. Clean the display surface with non- linen, non- abrasive cloth. Wet the cloth in a neutral detergent and removes the stubborn stains.

• Do not use detergents containing alcohol or acetone. Use special cleaner used for liquid crystal screen. Do not spray the detergent directly on the screen, otherwise the detergent may permeate into the display and cause electric shock.
  The following phenomena are normal for displays:

• You may find that the brightness on the screen is slightly uneven, which is related to the desktop pattern you are using,

• After the same image is displayed for several hours, the image displayed on the previous screen may remain when switching images. The screen will slowly recover, or you can turn off the display for several hours.

• Please contact your distributor or service center for repairs when the screen turns black or flickers or . Do not try to repair the screen yourself!
  Repacking

• Do not throw away the used EPE (Expandable Polyethylene) and carton box. When there is a need to send back the product for replace or repair, please repack the display back to its original state.
  Treatment

• The fluorescent lamp of the display contains trace amounts of mercury.

• Do not dispose the product as ordinary household waste.

• The disposal of products must be handled in accordance with local regulation

After-sale service

Products are warranted for one full year.

• Within 7 days from the date of purchase, the consumer may choose to return, replace or repair the goods in case of any of the faults listed in the Performance Failure Table for Commodity of Microcomputers.
• Within 15 days from the date of purchase, the consumer may choose to replace or repair the goods in case of any failure listed in the Performance Failure Table for Commodity of Microcomputers
• Within one year from the date of purchase, the consumer can choose to repair the goods in case of any faults listed in the Performance Failure Table for Commodity of Microcomputers

The following circumstances are not covered by “Three Guarantees” (for repair, replacement or compensation of faulty products):

• The valid period of “Three Guarantees” is exceeded.
• Failed to provide valid voucher and invoice of “Three Guarantees” .
• The contents of the invoice are altered or inconsistent with the actual identification of the product.
• There are 3 or less bad spots, 3 or less bright spots, and the total number of 5 or less bad and light spots on the screen.
• There is damage caused by failure to use, maintain and repair the product in accordance with the requirements of the product instruction manual (man-made damage)) or damage caused by removal by non- professional repairman (unauthorized removal and repair).
• Goods that are sold outside of mainland China (excluding Hong Kong, Macao and Taiwan)
• In order to protect your legitimate rights and interests and avoid unnecessary losses, please select the paid services to remedy the failure or damage of the display caused by the following reasons, but not covered under the warranty.
• The warranty period is exceeded.
• There are scratches, bumps, deformations, sags on the liquid crystal panel.
• The product has been removed or repaired by any unauthorized service center or personnel
• Damage caused by accidental or human factors and external forces (including misoperation, handling, collision, input of inappropriate voltage, etc)
• Damage caused by use of non-standard or unpublished software or non-standard related computer components (e.g. Graphics card).
• Damage caused by force majeure such as natural disasters (e.g. earthquake, fire, flood, etc.)

For services beyond the scope of the free warranty, A fee may be applied. (Calculated fee = Technical Service Fee + Fee of Replacement Parts).
The company reserves the right to interpret and/or amend ail the above provisions without prior notice. In case of disputes, the “Provisions on the Responsibility of Repair, Replacement and Refund of Commodity of Microcomputers” shall prevail.

Manufacturer: Shenzhen Letouch Family Technology Co., Ltd.
Address: 605, Workshop C, No.1, East Industrial District,
Shange Science park, Xinhua Community,
Bantian Street, Longgang District, Shenzhen, China
Website:https://monitortp.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>