ifi iOne Home Audio DAC with Bluetooth Instruction Manual
- October 31, 2023
- ifi
Table of Contents
ifi iOne Home Audio DAC with Bluetooth
Product Information
-
Product Name: iOne
-
Power Source: Not specified
-
Supported Formats: PCM
(44.1/48/88.2/96/176.4/192kHz), DSD (2.8/3.1/5.6/6.2/11.2/12.4MHz), DXD (352/384kHz) -
DAC System: Bit-Perfect DSD & DXD DAC by Burr Brown (1-DAC Chip; 2-Channel; 4-Signals)
-
Filter: PCM: Measure/Listen digital (selectable), DSD: Measure/Listen analogue (selectable), DXD: Bit-Perfect Processing, fixed filter
-
Input: USB 3.0 compatible with USB 2.0, Bluetooth (TM) with aptX & AAC Codec, SPDIF RCA & Optical Combo
-
Output: SPDIF RCA for BT & USB (PCM up to 192kHz), Audio RCA L/R
-
Frequency Response: 20Hz – 20kHz
Product Usage Instructions
- Bluetooth Pairing Button: Long press to enter Bluetooth pairing mode.
- LED: The LED indicator shows different colors and modes to indicate the device’s status. Blue indicates Bluetooth mode, Cyan indicates DSD256 mode, White indicates DSD128/DSD64 mode, Yellow indicates DXD384/352kHz mode, Green indicates 192/176kHz mode, Purple indicates 96/88/48/44kHz mode, and Red indicates MQA Unlock mode.
- Input selection switch: Use this switch to select the input source. Multiple sources can be connected, and this switch helps in choosing the desired input.
- Digital Filter: There are two options available for the digital filter selection. “Listen” is recommended for listening and uses the Minimum Phase Digital Filter. “Measure” is recommended for taking measurements and uses the Standard Digital Filter.
- RCA output: Connect RCA interconnect cables from the iOne to the desired amplifier using this output.
- SPDIF Input/Output (Coaxial Input/Output, Optical Input): This section allows you to connect the signal output from the host devices (such as Apple TV, Google Chromecast, CD transport, etc.). When the USB connection is selected, the SPDIF automatically becomes the output.
- USB Input: Use this input for connecting a USB source, such as a laptop.
Note: Please refer to the user manual for detailed instructions on power source, connections, and other specifications.
PRODUCT OVERVIEW
Bluetooth Pairing Button
Long press to enter Bluetooth pairing mode.
LED
- LED Color: Mode
- Blue: DSD256 (11.2/12.2MHz)
- Cyan : DSD128(5.6/6.2MHz)/DSD64(2.8/3.1MHz)
- White: DXD384/352kHz
- Yellow : 192/176kHz
- Green: 96/88/48/44kHz
- Purple : MQA
- Red: Unlock
- Bluetooth Blue: Connected
- Blue/Red (flashing): Pairing
- Blue (flashing): Not Connected
Input selection switch
Use this to select the input.
Note : Multiple sources can be connected, use the switch to select the input.
Digital Filter
- Listen: Recommended for listening. (Minimum Phase Digital Filter)
- Measure:**** Recommended for taking measurements. (Standard Digital Filter)
RCA output
To connect RCA interconnect cables from the iOne to the desired amplifier.
SPDIF Input/Output
(Coaxial Input/Output, Optical Input)
To connect the signal output from the host (Apple TV, Google Chromecast, CD transport etc).
Tip : With USB connection selected, the SPDIF automatically becomes output.
USB Input
For connection from a USB source, such as a laptop.
Specifications
- Power Source: USB Bus power, embedded AMR Active Noise Cancellation® technology
- Formats: 44.1/48/88.2/96/176.4/ 192kHz PCM 2.8/3.1/5.6/6.2/11.2/ 12.4MHz DSD 352/384kHz DXD
- DAC System: Bit-Perfect DSD & DXD DAC by Burr Brown (1-DAC Chip; 2-Channel; 4-Signals)
- Filter :
- PCM : Measure/Listen digital (selectable)
- DSD : Measure/Listen analogue (selectable)
- DXD : Bit-Perfect Processing, fixed filter
- Input: USB 3.0 compatible with USB 2.0 Bluetooth (TM) with aptX & AAC Codec SPDIF RCA & Optical Combo
- Output: SPDIF RCA for BT & USB (PCM up to192kHz) Audio RCA L/R
- Frequency Response : 20Hz – 20kHz <+0/-0.5dB
- (44.1kHz SR, Measure Filter)
- 1Hz – 44khz <+0/-3.0dB
- (>= 88.2kHz SR, Measure Filter)
- Output Voltage @ 0dBFS: 2.05V (+/-0.05V)
- Dynamic Range : 109dB (A)
- Signal/Noise ratio: 109dB (A) @ 0dBFS
- THD & N @ 0dBFS: < 0.0015% 10k Load
- Output Impedance: < 50Ω
- Power Consumption: < 2.5W
- Dimensions: 100 (l) x 64 (w) x 25.5 (h) mm
- Weight: 122g (0.27lbs)
- Warranty period: 12 months
Specifications are subject to change without notice.
Terms and Conditions
iFi guarantees that this iFi product shall be free from defects in materials
and workmanship for a period of 1 year for parts and labour. The warranty
period begins at the date of retail sale by an authorized iFi
distributor/dealer and is subject to the following requirements and
understandings:
- It is the responsibility of the buyer within 30 days from the original sale, to register and activate the product warranty with the iFi website.
- The original invoice must be produced for authentication prior to any warranty claim.
- The iFi product must not have been modified in any manner whatsoever, or the warranty will immediately become void.
- The iFi warranty is only valid in the country of original sale and is not transferable.
- The product must not have been stored in a humid environment; nor subjected to weather, water, or saltwater spray.
- iFi shall not, under any circumstances, be liable for any incidental or consequential damages arising from the loss of property or other damage or losses due to the failure of an iFi product. iFi is not liable for loss of use or inconvenience caused by the failure of an iFi product. iFi is not liable for damage caused to other audio components because of the failure of an iFi product.
- During the warranty period, iFi will repair the product to working order, or, at iFi’s discretion, replace the defective module with a similar available product.
- All repairs performed after expiry of the warranty period will be charged to the owner and will carry a 180-day warranty on parts and labour. The customer is responsible for shipping the unit to the iFi distributor in the original packaging. This includes the payment of any shipping charges and related taxes.
- Should any warranty issues arise, iFi’s decision is full and final.
if warranty
In order to activate the warranty for this iF product, you must register with
the iFi website.
- Component:
- Serial no:
Ver.1.5