SONGYUKA 34PSI Airbrush Kit with Air Compressor User Guide

SONGYUKA 34PSI Airbrush Kit with Air Compressor

Product Specifications

• Brand: SONGYUKA
• Model: airbrush
• Type: Gun-style airbrush

Product Usage Instructions

Assembly:

1. Attach the airbrush gun to the air hose.
2. Insert the desired color of paint into the airbrush cup.
3. Adjust the airflow and paint flow settings according to your needs.

Operation:

1. Hold the airbrush gun comfortably in your hand.
2. Press down on the trigger to release the paint while simultaneously activating the airflow.
3. Maintain a consistent distance between the airbrush and the surface for even coverage.

Cleaning:

1. After each use, disassemble the airbrush gun and clean all parts thoroughly with appropriate cleaning solutions.
2. Ensure there is no paint residue left in the gun to prevent clogging.

Frequently Asked Questions

Q: How do I adjust the paint flow on the airbrush?

A: The paint flow can usually be adjusted using a control knob or lever located on the airbrush gun itself. Refer to the user manual for specific instructions.

Q: What type of paint can I use with this airbrush?

A: This airbrush is compatible with most types of airbrush paints, including acrylics, enamels, and lacquers. It is recommended to use paints specifically designed for airbrushing.

INTRODUCTION OF OXYGEN INJECTING APPARATUS

The oxygen injection instrument uses the oxygen with the concentration of only 21% in the extracted air, which is filtered and compressed into the oxygen active factor with the purity of more than 95% by special technology, and then released under the pressure of 0.2 PA, so as to achieve the most effective and safe oxygen therapy through special channels, so as to achieve the beauty effect of whitening, wrinkle removing and skin whitening.

THREE FUNCTIONS OF OXYGEN INJECTOR

A . HIGH-PRESSURE OXYGEN INJECTION
9.5% pure oxygen and active substances will be injected into the skin base layer by injecting oxygen under the pressure of 2 bar without needle. The oxygen injection instrument is equipped with a special stainless steel injection gun, which can inject oxygen and nutrients into the deep layer of the skin as long as it is close to the skin. It can treat and improve the skin tone, wrinkles, relaxation, pigmentation, skin desali- nation, recovery skin, smoking skin and mature skin caused by hypoxia Problem.

B . MILD OXYGEN INJECTION

9.5% pure oxygen and active substances will be injected into the skin base layer by injecting oxygen under the pressure of 2bar without needle. The oxygen injection instrument is equipped with a special stainless steel injection gun, which can inject oxygen and nutrients into the deep layer of the skin as long as it is close to the skin. It can treat and improve the skin tone, wrinkles, relaxation, pigmentation, skin desali- nation, recovery skin, smoking skin and mature skin caused by hypoxia Problem.

C .TO SMELL(INHALE) OXYGEN
Use oxygen and 100% pure aromatherapy essential oil to breathe through the respiratory tract.

THREE FUNCTIONS OF OXYGEN INJECTOR

1. Water and oxygen
   PRODUCT:MINERAL WATER
   Usage: put the mineral water into the small cup of the spray gun, and inject the water and oxygen into the skin of human body through strong pressure and speed

2. OXYGEN INJECTION
   Products: water based, all kinds of spray water make-up water and rose pure dew, refreshing balance anti acne dew.
   Usage: put proper amount of water skin care products into the small cup (water skin care products can be selected according to different skin of customers)

3. OXYGEN INJECTION
   Products: the essence of essence (essence, anti allergy repair essence, levo VC essence, eye essence, facial essence) is injected into the dermal cortex of the skin. Usage: choose the right essence for different skin. Dry skin can moisturize and whiten, oily skin can shrink pores and control oil and refreshing. (all products diluted to water)

PRODUCT PARAMETERS

PRODUCT WARRANTY CARD

KEY TIPS

1. When the instrument is fully charged, it will display red when charging and green when fully charged (do not discard the box when unpacking, in case of quality problems requiring replacement)
2. Never use it after unplugging the power supply when charging
3. Spray and clean it with warm water or alcohol before use
4. The products used must be aquatic products. (when using high concentration products, mineral water shall be poured into the distribution measuring cup to neu- tralize and dilute the products)
5. The product should not stay in the bottle for a long time, and the leftover product should be poured into the measuring cup for storage (to avoid blocking water leakage due to product condensation)
6. Spray once with clean water after each use, and then dry with air for several seconds. (avoid clogging due to product condensation)

The reason why the spray gun doesn’t come out of water

1. The product concentration is too high (it is better to dilute it to water state)
2. If there is dirt in the spray gun, clean it.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>