Geekworm N100 Metal Case Enclosure with Power and Reset Control Switch User Manual
- May 15, 2024
- Geekworm
Table of Contents
Geekworm N100 Metal Case Enclosure with Power and Reset Control Switch
Product Information
Specifications
- Compatible with: Jetson Nano B01 version & T201, Jetson Nano A02 version & T201, Jetson Nano 2GB (NEW) & T201, NVIDIA Jetson Xavier NX developer kit
- WiKi : wiki.geekworm.com/N100
Product Usage Instructions
Installation
For detailed installation instructions, please refer to the user manual on the provided WiKi page or scan the QR code.
Make sure to watch the installation videos specific to your development board:
Note: Remove the 2pcs metal cover in front of the USB3 and HDMI port when using N100-V12 with Jetson Nano A02, B01, and Jetson Xavier NX.
How to Connect:
For Jetson Nano A02, connect the blue wire to the 3.3V pin at J41 and the white wire to the GND pin at J41.
Cooling Fan
The case reserves a 22mm high fan installation height. It is recommended to use a Noctua NF-A4x20 5V PWM fan. The package includes 4pcs PM2.5*22 screws, 4 pcs M2.5 nuts, and 4 pcs gaskets for fan installation. Use ABS tweezers during fan installation.
FAQ
If you have any further questions or need support, please contact support@geekworm.com
The latest version N100-V12 case is compatible with:
- Jetson Nano B01 version & T201
- Jetson Nano A02 version & T201
- Jetson Nano 2GB (NEW) & T201
- NVIDIA Jetson Xavier NX developer kit
Wiki: wiki.geekworm.com/N100, or scan the QR code for the user manual and installation video.
√Please refer to our wiki page about the user manual according to the development board you use!!!
Installation video
- Video 1 : For NVIDIA Jetson Xavier NX: youtu.be/7Cqr9R04htc
- Video 2 : For Jetson Nano 2GB/B01: youtu.be/Q5n2Aa_z0qI
- Video 3 : For Jetson Nano A02: youtu.be/SpUB6h4Akp4
- Note : Please remove the 2pcs metal cover in front of the USB3 and HDMI port when using N100-V12 with Jetson Nano A02 and B01 and Jetson Xavier NX
FAQ
-
Q1: Why was the MICRO SD card slot canceled?
-
A : N100-V9 is compatible with both A02 and B01 versions now. We must increase the distance between the JETSON NANO motherboard and the front panel of the case to install the switch. We found that even if we kept the TF card slot, we couldn’t insert the TF card by hand or plastic tweezers, so we have to cancel this card slot;
We hope that the official NVIDIA will adjust the position of J50 in subsequent versions. For more questions, please refer to the official forum link:
-
-
Q2: How to choose the right power supply?
- A : JETSON NANO supports two kinds of interface power supply: Micro USB power adapter and DC Jack power adapter; You can choose a different power adapter by controlling the jumper of J48; We strongly recommend that you use DC Jack PSU, because DC Jack can provides greater current input than Micro USB.
-
Q3: Is it compatible with the NVIDIAJetson Xavier NX developer kit?
- A : Yes, but you will need an extra 2pcs WiFi Antenna with IPEX MHF4 to RP SMA Female Extension Cable to use together with this N100-V9 Case.
- To use the WiFi antennas, it needs to remove the bottom holder of the NVIDIA Jetson Xavier NX. Then install the antennas.
-
Q4: How do I use a jumper?
- A : Because this case has a power switch, you need to disable the AUTO ON function first. Please insert the jumper cap into the AUTO ON position of the J40 pin to disable the AUTO ON function when used with the Jetson Nano B01 and A02 versions.
How to connect? (For Jetson Nano 2GB, please refer to B01 )
Supplement for Rev A02 : The blue wire =>3.3V pin at J41; White wire => GND pin at J41
About cooling fan
The case is reserved for a 22mm high fan installation height, it is recommended to use Noctua NF-A4x20 5V PWM fan, we prepare 4pcs PM2.5*22 screws and 4pcs M2.5 nuts and 4 pcs gaskets to install this fan. You need to use the ABS tweezers when you install this fan.
References
- N100 - Geekworm Wiki
- Stop Shipping the NVIDIA Jetson Nano Development Kit-B01, J50 is on the wrong side! - Jetson Nano - NVIDIA Developer Forums
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>