Atid ATS100 Barcode Bluetooth Reader Owner’s Manual

ATS100 Barcode Bluetooth Reader

Product Specifications

• Manufacturer: ATID Co., Ltd
• Model: ATS100
• Version: 1.0

Product Overview

The ATS100 is a versatile device designed for various
applications.

Key Features

• Quad lock mounting system
• LED indication for status
• Easy button operation

Before Use

Precautions:

1. Precautions for charging
2. Precautions for use
3. Other cautions and notes

Product Components

The product includes the following components:

• GUN HANDLE
• ADAPTER
• USB CABLE

Quad Lock Mounting and Type

The ATS100 features a Quad Lock mounting system for secure
attachment.

Removing and Installing the Gun Handle

1. To remove the gun handle, follow the instructions in the
   manual.

2. To install the gun handle, align it correctly and secure it in
   place.

LED Indication by Status

The LED lights provide information on the device’s current
status.

Button Operation

The device’s buttons are easy to operate for quick
navigation.

Charging

1. To charge using the adapter, connect the USB cable to the
   device and plug it into a power source.

2. To charge with a PC USB port, follow the instructions provided
   in the manual.

FAQ

Q: How do I reset the device?

A: To reset the device, press and hold the power button for 10
seconds.

Q: Can I use the device while it is charging?

A: It is recommended to avoid using the device while it is
charging to prevent any potential safety hazards.

ATS100 USER GUIDE
ATID Co.,Ltd Ver 1.0

Contents

BEFORE THE BEGINNING ……………………………………………………………………………………………… 5

PRODUCT OVERVIEW …………………………………………………………………………………………………… 5

KEY FEATURES ………………………………………………………………………………………………………………. 6

BEFORE USE ………………………………………………………………………………………………………………….. 7

1. PRECAUTIONS FOR CHARGING……………………………………………………………………………………………………….7 2. PRECAUTIONS FOR USE …………………………………………………………………………………………………………………. 8 3. OTHER CAUTIONS AND NOTES ……………………………………………………………………………………………………..9

PRODUCT SPECIFICATION …………………………………………………………………………………………..10

CONFIGURATION OF THE PRODUCT ………………………………………………………………………….11

1. PRODUCT COMPONENTS ……………………………………………………………………………………………………………. 11 2. NAME OF EACH PART………………………………………………………………………………………………………………….. 11

QUAD LOCK MOUNTING AND TYPE…………………………………………………………………………..12

1. QUAD LOCK MOUNTING …………………………………………………………………………………………………………. 12 2. QUAD LOCK TYPE ……………………………………………………………………………………………………………………. 13 3. EQUIPPED WITH A SMARTPHONE ……………………………………………………………………………………………….. 13

REMOVING AND INSTALLING THE GUN HANDLE ……………………………………………………..14

1. REMOVING THE GUN HANDLE……………………………………………………………………………………………………. 14 2. INSTALLING GUN HANDLE ………………………………………………………………………………………………………….. 14

LED INDICATION BY STATUS………………………………………………………………………………………15

BUTTON OPERATION…………………………………………………………………………………………………..16

1. POWER ON …………………………………………………………………………………………………………………………………. 16 2. POWER OFF ………………………………………………………………………………………………………………………………… 16 3. DATA COMMUNICATION MODE SETTING ………………………………………………………………………………….. 16 4. SWITCH BARCODE / RFID FUNCTION ………………………………………………………………………………………… 16

CHARGING …………………………………………………………………………………………………………………..17

1. CHARGE USING THE ADAPTER …………………………………………………………………………………………………….. 17

2. CHARGING WITH PC USB PORT ………………………………………………………………………………………………… 17

3. CHARGING WITH CRADLE …………………………………………………………………………………………………………… 17

4. SUPPORT FOR SIMULTANEOUS CHARGING OF SMARTPHONES …………………………………………………… 17

2

ATS100 User Guide

BLUETOOTH DATA COMMUNICATION MODE SETTING…………………………………………….18

1. ENTER SETTING MODE ………………………………………………………………………………………………………………… 18 2. LED INDICATION FOR EACH BLUETOOTH MODE ……………………………………………………………………….. 18

USB DATA COMMUNICATION MODE SETTING………………………………………………………….19

1. ENTER SETTING MODE ……………………………………………………………………………………………………………….. 19 2. LED INDICATION FOR EACH USB MODE …………………………………………………………………………………… 19

SETTING MODE BY SCANNING BARCODES………………………………………………………………..20

1. FUNCTIONAL DESCRIPTION…………………………………………………………………………………………………………. 20 2. HOW TO SET UP………………………………………………………………………………………………………………………….. 20 3. MODE SETTING BARCODE ………………………………………………………………………………………………………….. 21

USING ANDROID HOST DEMO APPLICATION ……………………………………………………………22
1. ANDROID HOST ­ BLUETOOTH CONNECTION …………………………………………………………………………… 22 2. ANDROID HOST ­ BLUETOOTH DISCONNECTION………………………………………………………………………. 24 3. ANDROID HOST ­ REMOVE BLUETOOTH CONNECTION INFORMATION…………………………………….. 24 4. ANDROID HOST ­ USB CONNECTION……………………………………………………………………………………….. 25 5. ANDROID HOST ­ USB DISCONNECTION ………………………………………………………………………………….. 27 6. ANDROID HOST ­ REMOVE USB CONNECTION INFORMATION………………………………………………… 27 7. ANDROID HOST – RFID TAG SCAN …………………………………………………………………………………………… 28 8. ANDRODI HOST ­ BARCODE SCAN ……………………………………………………………………………………………. 29 9. ANDROID HOST ­ DEMO APPLICATION MENU …………………………………………………………………………. 30

USING WINDOWS HOST DEMO APPLICATION ………………………………………………………….31
1. WINDOWS HOST ­ BLUETOOTH CONNECTION …………………………………………………………………………. 31 2. WINDOWS HOST – WINDOWS 7 PLATFORM …………………………………………………………………………….. 31 3. WINDOWS HOST – WINDOWS 10 PLATFORM …………………………………………………………………………… 33 4. WINDOWS HOST – USB CONNECTION ……………………………………………………………………………………… 36 5. WINDOWS HOST ­ DEMO APPLICATION CONNECTION ……………………………………………………………. 37 6. WINDOWS HOST – RFID TAG SCAN …………………………………………………………………………………………. 38 7. WINDOWS HOST ­ BARCODE SCAN ………………………………………………………………………………………….. 39

USING IOS HOST DEMO APPLICATION ………………………………………………………………………40

FIRMWARE UPDATE…………………………………………………………………………………………………….41

1. FIRMWARE UPDATE PREPARATION……………………………………………………………………………………………… 41 2. FIRMWARE UPDATE PROCEDURE ………………………………………………………………………………………………… 41

3

ATS100 User Guide

SDK (SOFTWARE DEVELOPMENT KIT) ………………………………………………………………………..44
PRODUCT WARRANTY ………………………………………………………………………………………………..45
1. ATS100 PRODUCT DETAILS……………………………………………………………………………………………………….. 45 2. SDK DOWNLOAD……………………………………………………………………………………………………………………….. 45 3. WARRANTY AND TECHNICAL SUPPORT………………………………………………………………………………………. 45 4. CERTIFICATIONS ………………………………………………………………………………………………………………………….. 45

4

ATS100 User Guide

Before the Beginning
The objective of user guide is to pass the basic contents related with ATS100s maintenance and smooth uses. User guide inclusive of text, images, logos, product name may not be distributed, modified, displayed, reproduced (in whole or in part) without the prior written permission of ATID Co,.Ltd. Furthermore, the described contents in this document are subject to change without notice for improving or maintaining the product and we inform the user that some material can be different with the described contents due to the firmware changes of product. Ownership of text, images, logos, product name in user guide is included in writer and some parts of text, images, logos, product name in the user guide were borrowed for users understanding at random. if there is a legal restriction such as a copyright law, it will be redistributed after adjustment. .
Product Overview
ATS100 is an SLED-type barcode/RFID reader product. This product meets the basic performance of industrial products that can be used in waterproof/dustproof/dustproof and 1.5m drop tests above IP65 and can be used as data collectors in various fields, including medication management, inventory management, logistics delivery/tracking, production and access control.
This product can collect 1D/2D barcode and UHF RFID Tag information from one device. The collected data can be sent to the Host device via Bluetooth or USB transfer. SDK is supported for easy processing of collected data on host devices with Windows, Android, and iOS.

5

ATS100 User Guide

Key Features

1. This product is an SLED type barcode/RFID reader. 2) When the QUAD LOCK® Mount option is applied, the host device can be fixed on the top of the
   product and communication is possible with a wired cable. 3) It is a durable industrial product that meets IP65 and 1.5m drop standards. 4) Zebra (formerly Motorola)’s SE4710 barcode engine is adopted, enabling fast and accurate
   barcode data collection. 5) R2000 module from Impinj is built in, so UHF RFID Tag can be read-written. 6) Using a USB Type-C Cable, it can be connected to a PC and charged. 7) Even without a dedicated charging adapter, it can be charged using a regular smartphone charger.

6

ATS100 User Guide

Before Use
· Be sure to read and use safety precautions before using them. · If there is any problem or inconvenience during use, please contact your dealer or place of
purchase. · Please ensure that the following is used more safely and correctly to prevent accidents and
physical damage. · The user is responsible for any injury caused by the user who did not follow this instruction,
so please be sure to observe it.

1. Precautions for Charging

1. It is very dangerous to use a charger with a 2) Do not bend the power cord too much or

damaged cord, so please replace the charger

keep it pressed by heavy objects.

with a new one.

3. Do not plug multiple power outlets at the 4) Do not touch the power plug with wet hands

same time. (This may cause a fire or electric

or pull the cord out. (This may cause electric

shock.)

shock and short circuits.)

7

ATS100 User Guide

2. Precautions for Use

1. Wipe the surface of the product lightly with a 2) Avoid high temperatures such as direct

dry towel, and do not use chemicals or

sunlight and near heating appliances. If the

cleaning agents as they will deteriorate the surface and peel off the paint.

product or charger smokes or smells strange, stop using it immediately and contact your dealer or purchaser. (This may

cause a fire or electric shock.)

3. Do not spray water directly on each part of 4) Do not use in places where there is a lot of

the product during cleaning. (This may cause

moisture, dust, or soot. (This may cause a

a fire, electric shock, or failure.)

fire, electric shock, or failure.)

5. Do not modify, remove, or repair it 6) Keep away from home appliances,

arbitrarily. We are not responsible for any

vibrations, or magnetic types. (This may

accidents caused by it.

cause product malfunction.)

8

ATS100 User Guide

3. Other Cautions and Notes

1. Notes on handling · Do not use highly volatile substances such as insecticides near this product. · Be careful not to leave rubber or plastic products in contact with this product for a long time, as marks may be formed. · If the product is used for a long time, the product may generate heat, but please rest assured that this is not a malfunction.
2. Precautions for using Lithium-ion Batteries · This product uses a Li-ion battery. · The lifespan of the battery varies depending on the period of use and usage, and the usage time gradually shortens after purchase. · When not in use for a long time, fully charge the battery about once every 3 months and store it separately from the product. · The warranty period of the battery is 6 months from the date of shipment. Batteries are consumables, so if any problems arise during use, please contact the place of purchase.
3. Provision of delivery charges related to initial defects and repairs · Initial defect (15 days after receiving the product) : ATID bears the return shipping cost. · Within the free repair period (excluding product damage) : One way is borne by our company. · Paid repair period (after the warranty period) : The customer bears the return shipping cost.
4. No fast charger available A/S is not available for problems that occur when using the fast charger.
   Since the radio equipment may interfere with radio waves, this device cannot provide services related to human safety.

9

ATS100 User Guide

Product Specification

Performance Processor Supported Platforms Internal Storage Physical Characteristics Dimensions (W x L x H) Weight Power Display USB Interface Notification Data Collection
Protocol Reading Range Writing Range RF Output RFID (UHF) Frequency Range
Antenna Barcode Communication Bluetooth WLAN User Environment Operating Temp Storage Temp Charging Temp Humidity Drop Spec Sealing

ARM7 Core Windows, Android, iOS (BLE Only) –
® 76.1 x 173.7 x 139.8 mm (without QUARD LOCK ) 420g (With Battery) 5,200mAh Lithium-Ion Battery (Rechargeable) 1 USB Port / Type-C LED Indicator, Buzzer, Vibrator
EPC GEN2, ISO/IEC 18000-6C ~ 6m (Depending on environment and tag type) ~ 0.5m 1W (MAX) US / FCC : 902MHz ~ 928MHz EU / CE : 865MHz ~ 868MHz KR / KC : 917MHz ~ 921MHz JP / TELEC : 916MHz ~ 921MHz (1W)
: 916MHz ~ 924MHz (0.25W / Optional) Circular Antenna / 1dBi 2D Engine (Support to read 1D & 2D Barcode)
BT V2.1+EDR / BLE V4.1 –
-20°C to 50°C -30°C to 70°C 0°C to 45°C 5~95% (non-condensing, +25°C 1.5m IP65

10

ATS100 User Guide

Configuration of the product
1. Product Components

Product Body

Gun Handle (Built-in Battery)

USB Cable (Type-C)

Hand Strap

Cradle (Option)

QUAD LOCK Mount (Option)

QUAD LOCK Adapter (Option)

2. Name of each part
1 : Power Button 2 : Communication Mode Switch
Button 3 : Reset Button 4 : Trigger 5 : QUAD LOCK Connection Port 6 : Barcode Scanner 7 : RFID Antenna 8 : Barcode / RFID Toggle Button 9 : Charging LED 10 : Barcode / RFID LED 11 : Communication Mode LED 12 : Hand Strap Connection Hole 13 : USB Port (Type-C) 14 : Gun Handle Release Button 15 : Gun Handle (Built-in Battery) 16 : Cradle Connection Terminal

11

ATS100 User Guide

QUAD LOCK Mounting and Type

1. QUAD LOCK Mounting

1. Align the grooves of the QUAD LOCK 2) Push in the QUAD LOCK Mount’s USB type

Mount with the guides on both sides and

terminal so that it is fully inserted into the

insert.

QUAD LOCK® connection port.

3. Lock the QUAD LOCK Mount by sliding the lock to the left to prevent it from coming out.

12

ATS100 User Guide

2. QUAD LOCK Type
There are two types of QUAD LOCK USB cable connectors provided with this product: USB Type-C’ andMicro USB’. Please select the appropriate type according to the Host device to be used together. For details, please contact the place of purchase or ATID.

3. Equipped with a Smartphone

1. Attach the QUAD LOCK Adapter to the back 2) Insert the groove part of the QUAD LOCK

of the smartphone.

Adapter into the QUAD LOCK Mount

attached to the main body.

3. Turn the smartphone 45 degrees to fix it in 4) Connect the USB cable to the smartphone

the desired direction.

USB connection port.

A USB cable does not need to be connected unless charging or data communication via the USB port is desired. Please decide whether to connect or not according to the environment of use.

13

ATS100 User Guide

Removing and Installing the Gun Handle

1. Removing the Gun Handle

1. Press the gun handle release button.

2. Push gun handle back.

3. Pull the gun handle up.

Be careful not to injure your hands while removing the gun handle.

2. Installing Gun Handle

1. Attach the gun handle to the ATS100 body.

2. Install the gun handle by sliding it forward. (The button with ‘PUSH’ written on it with a click sound must come up to ensure it is properly installed.)

14

ATS100 User Guide

LED Indication by status
ATS100 displays the current device settings or status as shown below with LED operation.

LED
Charging LED
Barcode / RFID LED Communication Mode LED

Action
Blinking Red LED Red LED On Green LED On Blue LED On Blinking Blue LED LED Off Blinking Green LED Blinking Red LED

Function
Low Battery Charging Full Charging Barcode Mode Trigger Input Mode RFID Mode Bluetooth Mode USB Mode

15

ATS100 User Guide

Button Operation

1. Power On

1. Turn on the power by pressing the power button

until the buzzer sounds.

2. If the communication mode LED blinks after the buzzer sounds, the power is on.

If the gun handle has been disassembled and reassembled, the instrument will not power on immediately when the power button is pressed. This is not a malfunction, but a procedure to check the battery status when first connecting the battery. In this case, if you hold down the power button longer than normal, it will power on normally.

2. Power Off

1. If the power button

is pressed while the power is on, the power is turned off.

2. If the communication mode LED turns off after the buzzer sounds, the power is off.

3. Data Communication Mode Setting

1. Press the communication mode switch button

to sequentially switch between `Bluetooth

data communication mode’ and `USB data communication mode’.

2. It takes about 2~3 seconds to change data communication mode.

4. Switch Barcode / RFID Function
Each time the Barcode/RFID toggle button mode is sequentially switched.

is pressed, the Barcode’,RFID’, `Trigger Input’

`Trigger input mode’ is a mode in which the barcode or RFID reading function does not operate when a trigger signal is input and only the trigger signal is input to the host device.

16

ATS100 User Guide

Charging
1. Charge using the adapter

1. Plug the charging adapter into the USB port on the back of the ATS100.

2. It is recommended to use an adapter of 5V / 2A or higher. Charging time will increase if you use an adapter with a low power output.
   2. Charging with PC USB Port

3. The device is charged even when a USB cable is connected for data communication with a PC. 2) In this case, it is charged at a low speed and if the device and the smartphone are connected,
   the smartphone is not charged.
   3. Charging with Cradle

4. Fit the product to the cradle well.

5. Connect the USB port of the charger to the USB port located on the back of the cradle.

6. Cradle and charging adapter sold separately. If you wish to purchase, please contact the dealer or place of purchase.

4. Support for simultaneous charging of Smartphones

1. When the ATS100 is connected to the smartphone via the QUAD LOCK® USB cable, the ATS100 and the smartphone are charged at the same time.
2. In Android and Windows, communication with ATS100 through USB port is not possible while charging.
3. If the ATS100 is charged while it is connected to the device, the charging speed will be slow. 4) Simultaneous charging is not possible when connected to a PC. If you want simultaneous
   charging, use a charging adapter. 5) This product does not support Quick Charge.
   ‘Simultaneous charging of smartphones’ may not be supported depending on the smartphone model.

17

ATS100 User Guide

Bluetooth Data Communication Mode Setting

1. Enter setting mode

1. While pulling the trigger of the ATS100, press the 2) Press the Communication mode switch

power button to turn on the power.

button

to set the communication

mode LED to blink Green. (Set to Bluetooth

mode.)

3. Each time you press the barcode/RFID toggle 4) After setting the mode you want to set,

Button

, `BLE/HID/SPP’ mode is switched

press and hold the power button to

sequentially. Communication mode LED

complete the setting.

operates differently depending on the mode.

2. LED Indication for each Bluetooth Mode

1. Green LED blinks quickly 2) Keep Green LED on 3) Green LED blinks every 2 sec

: BLE Mode : HID Mode : SPP Mode

· If the Bluetooth data communication mode setting is incorrect, it may not be able to connect to the iPhone, Android, or Windows Host device being used. Please pay attention to the settings.
· iPhone can only be connected in BLE mode. · For Android and Windows, SPP mode or HID mode can be used. However, in HID mode, the
ATS100 main body cannot be controlled by the application.

18

ATS100 User Guide

USB Data Communication Mode Setting

1. Enter Setting Mode

1. While pulling the trigger of the ATS100, press 2) Press the Communication Mode Switch

the Power Button to turn on the power.

Button

to set the communication mode

LED to blink Red. (set to USB mode.)

3. Each time you press the barcode/RFID toggle 4) After setting the mode you want to set, press

Button

, `BLE/HID/SPP’ mode is switched

and hold the Power Button to complete the

sequentially. Communication mode LED

setting.

operates differently depending on the mode.

2. LED Indication for each USB Mode

1. Red LED blinks every 2 secs 2) Keep Red LED on

: VCP Mode : HID Mode

· If the USB data communication mode setting is incorrect, it may not be able to connect to the Android or Windows device being used. Please pay attention to the settings.
· Connection with iPhone is not supported. · For Android and Windows, SPP mode or HID mode can be used. However, in HID mode, the
ATS100 main body cannot be controlled by the application.

19

ATS100 User Guide

Setting Mode by Scanning Barcodes
1. Functional Description
Bluetooth Data Communication mode (BLE , HID, SPP), USB Data Communication mode (VCP, HID), and System Default Settings can be easily set by reading the special barcode.
· This setting mode is supported from firmware version `ats-5.1.1.11′. · When setting with the USB cable connected, the device does not reset after setting.

2. How to set up

1. Press the power button to turn on the
   power.

2. Press the Barcode/RFID Toggle Button to set to Barcode mode. (In Barcode Mode, the LED lights Blue.)

3. Aim at the barcode of the function you want 4) If the setting is completed normally, the

to set and scan by pressing the trigger button.

system is reset.

20

ATS100 User Guide

3. Mode Setting Barcode · When connected to the host device, it does not work even if the mode setting barcode is read.
· When setting with the USB cable connected, the device does not reset after setting.

1. Default setting (BT-SPP, USB-VCP Setting)

2. Bluetooth Data Communication Mode Setting
   Data Communication Mode
   Bluetooth SPP
   Bluetooth HID

Setting Barcode

BLE
3) USB Data Communicaiton Mode Setting Data Communication Mode
USB VCP

Setting Barcode

USB HID
21

ATS100 User Guide

Using Android Host Demo Application
1. Android Host ­ Bluetooth Connection

1. Install the Demo Application (Hereinafter : Demo App) included in the provided SDK. · In order to connect the Android Demo App and the device, the Bluetooth Data Communication Mode of the device must be set to SPP mode. · Demo App for Android is available from Android version 4.2 Jelly Bean or later. · For the smooth operation of the app, it is recommended to use a device with Android version 6.0 or higher.

2. Run the downloaded Demo App with the 3) Click ‘Allow’ on the next screen to activate the

icon shown below.

Bluetooth function of the host device.

4. Click ‘New Device’ from the menu that 5) Select BLUETOOTH’ on the convertedRegist

appears when you click the icon in the

Device’ screen and click the `Scan Device’

upper right corner.

button.

22

ATS100 User Guide

6. Connectable devices are displayed in `New 7) Touch and hold the

Devices’. If you click on the product, the

device information.

device information is registered and you

return to the previous screen.

icon of registered

8. Click the ‘Connect’ Button among the 9) When connected to the device normally, the

activated menus.

`Bluetooth connection request’ window is

activated. Click ‘Pair’ to connect the ATS100 to

the host device.

23

ATS100 User Guide

2. Android Host ­ Bluetooth Disconnection

1. While the ATS100 is connected to the host 2) Click `Disconnect’ in the activated menu to

device, touch and hold the icon of the

disconnect the connection between the host

registered device on the `Registered

device and the ATS100.

Devices’ selection screen.

3. Android Host ­ Remove Bluetooth Connection Information

1. While the ATS100 is connected to the host 2) Click `Delete’ in the activated menu to delete

device, touch and hold the icon of the

ATS100 device registration information.

registered device on the `Registered

Devices’ selection screen.

Even if the connected device is deleted from the app list, it is not removed from the Android device’s Bluetooth connection list.

24

ATS100 User Guide

4. Android Host ­ USB Connection
· The QUAD LOCK® option is required for USB connection. · The device must have USB data communication mode set to VCP mode in order for the
demo app for Android and the device to connect to the USB port.

1. Connect the USB cable from the QUAD 2) Click ‘New Device’ from the menu that is

LOCK® connector to the smartphone USB

activated when you click the

icon in the

port.

upper right corner.

3. On the converted `Regist Device’ screen, 4) Connectable devices are displayed in the

select the USB’ menu and click theScan

`New Devices’ item. If you click on the

Device’ button.

product, the device information is registered

and you return to the previous screen.

If you check the `Enable connect an usb device automatically’ option, it will be connected automatically from the next connection.

25

ATS100 User Guide

5. Touch and hold the

icon to the right of 6) Click the ‘Connect’ button among the

the registered device information.

activated menus.

7. When connected to the device normally, a window asking whether to allow access is activated. Click ‘OK’ to connect the ATS100 to the host device.

26

ATS100 User Guide

5. Android Host ­ USB Disconnection

1. With the ATS100 connected to the host 2) Click `Disconnect’ in the activated menu to

device, touch and hold the registered

disconnect the connection between the host

device information icon on the `Registed

device and the ATS100.

Devices’ selection screen.

6. Android Host ­ Remove USB Connection Information

1. With the ATS100 connected to the host 2) Click `Delete’ in the activated menu to delete

device, touch and hold the registered device information icon on the `Registed

ATS100 device registration information.

Devices’ selection screen.

27

ATS100 User Guide

7. Android Host – RFID Tag Scan

In order to connect the Android Demo App and the device, the Data Communication Mode of the device must be set to SPP’ for Bluetooth connection andVCP’ for USB connection.

1. After completing the connection with the 2) Click `RFID’ in the menu at the top of the

host device, touch and hold the device

`Inventory’ screen.

name shown below on the connected

device on the `Registed Devices’ screen to

enter the `Inventory’ screen.

To enter the `Inventory’ screen, you must touch the device name for a certain period of time.

3. Click the ‘Start’ button on the Demo App
   or pull the ATS100 trigger to start data reading.

4. The collected data is displayed on the ‘Data’ screen of the Demo App. Click the `Stop’ button on the Demo App or release the ATS100 trigger to stop data collection.

28

ATS100 User Guide

8. Androdi Host ­ Barcode Scan

In order to connect the Android Demo App and the device, the data communication mode of
the device must be set to SPP’ for Bluetooth connection andVCP’ for USB connection.

1. After completing the connection with the host device, touch and hold the device name shown below on the connected device on the Registed Devices’ screen to enter theInventory’ screen.

2. Click BARCODE’ in the menu at the top of theInventory’ screen.

· To enter the Inventory’ screen, you must touch the device name for a certain period of time. · If you select theBARCODE’ menu on the `Inventory’ screen, if the current setting of ATS100 is RFID mode, it is automatically changed to barcode mode. The reverse works the same.

3. Click the ‘Start’ Button on the Demo App or 4) If the barcode is read normally, the collected

pull the ATS100 trigger to start data

data is displayed on the ‘Data’ screen of the

reading.

Demo App.

29

ATS100 User Guide

9. Android Host ­ Demo Application Menu

As shown in the following figure, if you touch the

icon on the top right of the Inventory screen or

swipe the screen from left to right with your finger, you can see the demo menu appear. In this menu,

you can check device information and make basic settings.

1. Device Name : Device name composed of device name and Bluetooth MAC Address. 2) Device Address : Bluetooth MAC Address of the device. 3) Firmware Version : The firmware version currently installed in the device. 4) Inventory : Returns to the Inventory screen. You can also return by touching an area other than
   the menu. 5) Access Memory : Enters Memory Access mode of Tag. 6) Search RFID Tag : Enters the Search RFID Tag mode. 7) Device Options
   · Firmware Version · Serial No : Displays the serial number information of the device. · Auto Off Time : Set the time to turn off the device when not in use. · Button Mode : Sets the buzzer sound when the button is pressed. · Button Notify : Set whether to operate the buzzer and vibrator when the button is pressed. · Alert Notify : Set whether to operate the buzzer and vibrator when a notification occurs. 8) Battery Level : Displays the current remaining battery status. . For details on how to use the Demo App, refer to the `ATID Reader Demo Guide for Android’ document included in the SDK.

30

ATS100 User Guide

Using Windows Host Demo Application
1. Windows Host ­ Bluetooth Connection
To transmit/receive data to/from Windows platform devices using Bluetooth, ATS100 requires a PC with built-in Bluetooth function or a dedicated Bluetooth dongle. This chapter describes the Bluetooth connection method for Windows 7 and Windows 10, which are representative Windows platforms.
· For details related to the Bluetooth function of the host device, please check with the place of purchase of the PC or the person in charge of product installation.
· In this chapter, it is assumed that the Bluetooth-related driver is installed normally.
· For any problems that occur while using the product or during the installation process, please contact the dealer or manufacturer where you purchased the product.
· If the Bluetooth driver is not installed normally, or if a special driver supported separately by Windows 7 and Windows 10 OS is used, the contents of this manual may not match.
2. Windows Host – Windows 7 Platform

1. Set the communication mode of ATS100 to `Bluetooth Data Communication Mode’ and set it to SPP mode.
2. Select `Start Control Panel Devices and Printers Add a Device’.

31

ATS100 User Guide

3. The Bluetooth device is automatically searched. After selecting the ATS100-XXXX’ that you want to connect to, pressNext’ to proceed with adding a device.
4. When the connection code confirmation window is displayed, click `Next’ to proceed. The
   connection code does not need to be specially changed.
5. After a while, Windows7 will automatically search for the driver and proceed with the installation, and the screen will display a message Add device complete.

32

ATS100 User Guide

6. Double-click the newly added ATS100-XXXX’ inControl Panel Devices and Printers’ to display its properties, and then move to the `Service’ tab.

7. After checking all the services that appear in the Bluetooth service, click the OK button to finish adding services and adding Bluetooth devices. From this menu, user can find the COM port information assigned to the Bluetooth device.

3. Windows Host – Windows 10 Platform

1. Set the communication mode of ATS100 to `Bluetooth Data Communication Mode’ and set it to

`SPP’ mode.

2. Enter the Windows Settings menu through `

Start

Settings’ of Windows.

3. Select `Device’ menu in Windows settings.

4. Check that the Bluetooth function is turned on. If it is off, turn on the Bluetooth function.

33

ATS100 User Guide

5. Select `Add Bluetooth or other device’ menu.

6. Select the device type to add as Bluetooth. When selected, it starts searching for nearby Bluetooth devices that are requesting pairing.

7. If you click the device you want to connect to among the found Bluetooth devices, the pairing information screen of the target device is activated. After checking that it matches information of the screen of ATS100, if it matches, click the `Connect’ button.

The 4 digits after the device name to be searched are the last 4 digits of the Bluetooth Module MAC Address. This 4 digit value is entered as a different value for all devices.

34

ATS100 User Guide

8. When pairing is completed normally, `Your device is ready to go!’ message is displayed. Click the Done button to complete the pairing process.

9. When the device is added successfully, the device will be registered with the message Paired’. The COM Port information assigned to the device can be checked in the Hardware’ tab of the Properties’ of the connected device inDevices and Printers’ of the control panel.

10. After confirming that the ATS100 and the host device are connected, set the desired operation mode before use.

35

ATS100 User Guide

4. Windows Host – USB Connection
A USB cable is required to transmit/receive data to/from a Windows platform device using the ATS100 USB interface.
· For USB connection with Windows Host, the communication mode setting of the device must be set to USB data communication mode.
· The USB data communication mode of the device must be set to VCP mode. · Check whether `.NET Framework 3.5′ is installed.

1. Turn on the product and set the 2) Plug the supplied USB cable into the USB port

communication mode to `USB Data

on the back of the ATS100.

Communication Mode’.

3. Connect the USB cable to the PC.

4. Check the COM Port assigned to the machine
   in Device Manager in Control Panel.

The COM port number assigned to the device differs depending on the host PC situation.

36

ATS100 User Guide

5. Windows Host ­ Demo Application Connection

1. Run the Demo App, select the device you want to connect to the Device’ item, and select theCOM Port’ number assigned to the device.
   · If the `Port name’ does not match the device to be connected, check the communication mode status and driver installation status again.
   · If there is a problem installing the driver for Windows, please manually install the USB driver distributed with the SDK.
2. Click the `Connect’ button to connect the ATS100 to the host device. When the connection is completed normally, the buttons of the demo app are also activated.
3. If you want to disconnect from the host device, click the `Disconnect’ button to disconnect.

37

ATS100 User Guide

6. Windows Host – RFID Tag Scan

1. Referring to the above, connect the ATS100 to the host device and connect the Demo App. 2) Check if `Operation Mode’ is set to RFID, and if not, set it to RFID.
2. Click the `Start’ button on the demo app or pull the trigger of ATS100.
3. If the Continuous’ item is checked, the tag scan stops when theStop’ button is pressed or the trigger is released. A list of recognized tags is displayed in `RFID TAG Values’.

38

ATS100 User Guide

7. Windows Host ­ Barcode Scan

1. Referring to the above, connect the ATS100 to the host device and connect the Demo App. 2) Check if Operation Mode’ is set toBarcode’, if not, set it to `Barcode’.

2. Click the `Start’ button on the Demo App or pull the trigger of ATS100.

3. If the Continuous’ item is checked, the barcode scanning stops when the Stop’ button is pressed or the trigger is released. A list of recognized tags is displayed in `Barcode Values’.

For details on how to use the Demo App, refer to the `ATID Reader Demo Guide for Windows’ document included in the SDK.

39

ATS100 User Guide

Using iOS Host Demo Application

1. In order to send/receive data with iOS platform devices for ATS100, the `Bluetooth Data Communication Mode’ setting of ATS100 must be set to BLE mode.
2. User can download the Demo App through the App Store’. · The demo app is available from iOS version 10.2 or later. · For details on how to use the demo app, refer to theATID Reader Demo Guide for iOS’
   document included in the SDK.

40

ATS100 User Guide

Firmware Update
This product may be updated in the future to enhance its functionality and performance. If there is a problem during Firmware’s update operation, the product may not be recoverable. So, if you don’t have knowledge of software and hardware, please contact your place of purchase or manufacturer for updates.
1. Firmware Update Preparation

1. PC with Windows 7 or higher version (USB 2.0 Port) 2) ATS100 3) USB Type-C Cable 4) Firmware File ( xxxx.bin ) 5) Firmware Update Tool (Available from reseller or manufacturer if required)
   2. Firmware Update Procedure
2. Save the firmware file in a specific folder on your PC. 2) Execute the firmware update program.
3. After clicking the `Load Binary File’ button, designate the folder where the firmware file was previously saved.

41

ATS100 User Guide

4. Connect ATS100 to PC using USB Cable.
5. Set the communication mode setting of ATS100 to USB mode, VCP. 6) Click the select comport’ button of Firmware Download Tool. Then, select the COM Port assigned to ATS100 connected to your PC. · COM Port is assigned a different number depending on the PC situation. · Control PanelDevice Manager Ports (COM & LPT)’ Please check the COM Port number
   assigned to `AT91 USB to Serial Converter’ before entering.

42

ATS100 User Guide

7. Click the offline’ button to attempt to connect to the device. When connected normally, the button changes toonline’ and displays the current firmware version.
8. Click the `DOWNLOAD’ button to start the firmware update.
   · If the update is interrupted while the update is in progress, the device may become unusable.
   · The update may fail due to external factors. In this case, please try again.
9. After a while, the product will automatically restart when the download is complete.

43

ATS100 User Guide

SDK (Software Development Kit)
When the device operates in interactive mode, a separate program must be developed by referring to the SDK provided by ATID in order to utilize the data transmitted from the host device. ATID Bluetooth Reader SDK supports three platforms: Android, Windows, and iOS.

Platform Android Windows
iOS SDK Package Configuration
Demo
Doc
Lib Sample USB Drive for Windows

Development Tool

Development Language

Andorid Studio Java

Visual Studio

.NET Framework (C#), UWP (C#)

XCODE

Objective-C

Details

Demo Application Development documents such as user guides / manuals, programmer guides, demo guides, etc. Library for application development Sample Code Windows USB Driver of ATID Bluetooth Reader

Each folder is composed of subfolders for each platform as shown below.

44

ATS100 User Guide

Product Warranty
1. ATS100 Product Details
For more information on product details ATS100, please visit the address below. http://www.atid1.com
2. SDK Download
If you need an ATS100 SDK, please contact us or the place of purchase.
3. Warranty and Technical Support
All ATID products can be repaired free of charge for one year based on the product manufacturing date. However, in principle, any defects caused by customer carelessness in use shall be repaired even during the free repair period.
For warranty, technical support and inquiries on this product, please contact the distributor or ATID.
4. Certifications
This product is KC, FCC, CE and TELEC certified, but we are not responsible for any issues arising during use outside of the certified area.
For details, please contact the distributor or ATID.

ATID

Address : #1402, 83, Gasan Digital-1ro, Geumcheon-gu, Seoul, Republic of Korea (Zip code. 08589)

Phone

: +82-2-544-1436

Fax

: +82-2-859-0045

Homepage : www.atid1.com

Email

: [email protected]

The contents of the user manual are subject to change without notice for product specifications change or improvement.

45

ATS100 User Guide

References

• ATID / 에이티아이디 - UHF RFID Reader Provider in Korea
• ATID / 에이티아이디 - UHF RFID Reader Provider in Korea

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>