Dinstech DS02 Smart Door Lock User Manual

Dinstech DS02 Smart Door Lock

Product Information

• Specifications
  • Product: Smart Door Lock
  • Installation Guide: Included
  • Operation Guide: Included
  • App Guide: Included

Product Usage Instructions

• Installation Guide
  • Install Latch and Strike Place the latch and strike in their respective positions as instructed.
  • Pull out the Interior Knob Remove the interior knob carefully to proceed with the installation.
  • Install the Exterior Knob Attach the exterior knob ensuring it fits securely with the door.
  • Install the Interior Knob Position the interior knob correctly with the mark facing upward.  Prepare Door and Check Dimensions Ensure the door is prepared according to the provided dimensions.
• Operation Guide
  • Refer to the provided manual for detailed operation instructions.
• App Guide
  • Pairing Your Lock Follow the steps outlined in the manual to pair your lock with the app.
  • App Unlock/Lock Utilize the app to remotely unlock or lock your smart door lock.
  • Member Management and Fingerprints Manage access for different users and fingerprints through the app.
  • Create Smart Scenes Set up automated smart scenes for convenience.
• FAQ
  • Q: How do I reset my smart door lock?
  • A: Refer to the user manual for specific instructions on resetting the smart door lock.
  • Q: Can I install the smart door lock on any type of door?
  • A: The smart door lock is designed to be installed on standard doors. Ensure compatibility before installation.
  • Q: What do I do if I encounter issues with the app connectivity?
  • A: Check your internet connection and ensure the app is updated. Contact customer support if issues persist.

HARDWARE

Check Dimensions

Prepare the Door and Check Dimensions

Install Latch and Strike

1. Hold the latch in front of the door hole so that the latch is flush with the door edge.
2. Press the squared-shaped hole and Pull the latch to Set the latch backset to 60mm(2-3/8″) or 70mm(2-3/4″) to fit your door hole.
3. Make sure the squared-shaped hole is placed in a horizontal position.
4. Insert the latch into the door hole, and tighten Screw A to fix the latch.
5. Install strike box and strike plate with screw A into the door frame.

Pull out the Interior Knob

As the left figure shows, insert the pin into the hole and separate the rosette from the Interior Knob. Then use a screwdriver to remove the screw B.

Install the Exterior Knob

As shown above, install the Exterior Knob onto the door with the rod bolts going through the circular holes on the Latch, and the spindle going through the square-shaped(centre)hole.

Install the Interior Knob

• The〝up〞mark above the rosette should face upward.
• Install the rosette onto the door with the rod bolts aligning the circular holes, and spindle aligning the circular holes, and the spindle aligning the square-shaped (center)hole.
• Then insert the Screw B into the circular holes and tighten them to secure the rosette.
• Firstly, make sure the bar in the spindle is in the vertical position as shown above. Secondly, rotate the thumb to the circular mark.
• Lastly, insert the Interior Knob into the rosette by aligning the hole of the Interior Knob with the bar and aligning the rectangular hole at the edge of the interior knob with the circular hole at the edge of the rosette.

OPERATION

• Key To Unlock
  

  • Insert the key into the keyhole at the edge of the Exterior Knob and key 90 ° to the unlock, then turn the Exterior Knob to open the door.

• Restore the Factory Setting

  • Rotate the thumb turn from the circular mark to the lock sign on the left and then return the thumb tun to the circular mark, after repeating this operation 5 times, the same operation towards the right 5 times.
  • After that, you will hear a long beep and the fingerprint identification area will flash green.
  • Any fingerprints can unlock the lock.

• Normal Mode

  • As the figure shows, rotate the thumb to unlock the sign on the left to active privacy mode.
  • In the privacy mode, both members and administrators can unlock via the app. Only the administrator’s fingerprint can be unlocked.

• Passage Mode

  • As shown above， the thumb turns to unlock the sign on the right to active passage mode.
  • After activating passage mode, the doorknob is always unlocked.

• Privacy Mode

  • As the figure shows, rotate the thumb turn to the lock sign on the left to activate privacy mode.
  • Both members and administrators can lock via the app. Only the administrator’s fingerprint can be unlocked.

• Low Power Indication

  • After being unlocked by fingerprint or APP successfully, the buzzer beeps once, and the fingerprint identification area flashes green and then flashes red.

APP GUIDE

Scan the Tuya QR Code to download the app or search”Tuya” in the APP Store (IOS) and Google Play (Android) for download.

Account Registration

Register a new account (Email Address) or log in with an existing account .

Pair the Lock

• Turn on your phone’s Bluetooth and stay near the lock (within 3 meters) Click“Add Device” on the App.
• Add the lock.

Pair the Lock

Successful connection! You can click this icon “ to rename the lock or just click “Done” to complete the pairing.

APP Unlock/Lock

Unlock: Hold and drag the icon“ ” to the icon“ ”

Lock: Hold and drag the icon“ to the icon“ .

Member Management & Fingerprint Input

Select “Member Management” and tap “+” to add/share/cancel members. Press “Me” and follow the instructions to add fingerprints.

Create Smart Scenes

Select “Smart Scenes” on the screen. Then choose the scenes you prefer to set intelligent interactions.

Setting

Choose “Settings” to turn on/off “Remote Unlock” and set up lock volume.
Note: Remote unlocking requires a gateway connection.

Device Information Set-Up

Press the icon “ to check and set up the relevant information.

SPECIFICATIONS

Technical Parameters

• Name: Parameter Description
• USB Type-C /5V2A
• USB Type -C/5V2A
• Low power warning 3.5V±0.2
• Voltage range 3.0~4.2V
• Stand-by current <90μA
• Working current <500mA
• Unlock time ≥1.5sec
• Working temperature 23 F ~131 F (5 C ~55 C)

FCC

FCC CAUTION

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance between 20cm of the radiator and your body Use only the supplied antenna.
FCC ID: 2BB9K-DS02

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>