PS-203-80QT Permasteel 80QT Cooler User Guide

PS-203-80QT Permasteel 80QT Cooler

Specifications

• Model Number: PS-203-80QT
• Capacity: 80 quarts
• Material: High-quality plastic and metal components
• Color: Various options available
• Dimensions: 38.6 x 15.4 x 33.9 inches
• Weight: 28 lbs

Product Usage Instructions

Assembly Steps:
Follow the provided assembly instructions carefully to ensure proper setup of your Permasteel 80QT Cooler.

Usage:
Once assembled, the cooler can be used to store and chill beverages or food items for outdoor gatherings or events.

Care & Maintenance:
Regularly clean the cooler with mild soap and water to maintain its appearance. Avoid using abrasive cleaners or tools that could damage the surface.

Warranty Information:
Refer to the provided warranty information for details on coverage and limitations. Contact Permasteel Customer Service for any warranty-related inquiries.

FAQ

1. Q: What should I do if I have missing or damaged parts?
   A: Contact Permasteel Customer Service at 1-888-287-0735 for assistance with missing or damaged parts.

2. Q: Can I use the cooler for commercial purposes?
   A: The warranty is valid only for personal use in the USA; commercial use voids the warranty.

Thank you for purchasing your new patio cooler from Permasteel. We hope you enjoy your product. If you have any questions, please call us at 1-888-287-0735 or visit us at www.permasteel.life

Important Information
Thank you for your purchase of our Patio Cooler. We sincerely hope you will enjoy using our fine products.

• Please take your time to read the instructions thoroughly and follow each step carefully for a safe and easy assembly.
• Please contact our customer service at 1- 888-287-0735 if you have any questions.
• Please keep this manual for future reference.

CAUTION

1. Hand tools only, use of power tools could damage the product.
2. Remove all components, hardware and tools from the box before assembly. Please separate all the hardware and be sure they match with pg 4 of this manual.
3. Please consider recycling all applicable packaging material.

Parts List

If you have any missing or damaged parts, please call 1-888-287-0735 M-F 8:00-5:00 PST. For replacement parts, visit us at www.permasteel.life

Hardware

The following hardware is provided in a poly bag.
M6x16mm Hex Flange Bolt: 12 pcs

M6x16mm Hex Socket Bolt: 14 pcs

Tools Included:

M5x35mm Screw & Washer: 2 pcs each
(Note: These screws are pre-attached to the lid knobs, please refer to page 8 for more details.)

Tools
The following tools are required for assembly:

• Allen wrench (provided)
• Phillips screwdriver (not provided)

Assembly Instructions

Step 1

• Turn the body (basin) upside down and place it on a clean and soft surface. Attach 4 legs (G) to the body (D) with (3) M6x16mm hex flange bolts (AA) for each leg (12 bolts in total).

Step 2

• Attach the body handles (C) to the body (D) using (6) M6x16mm hex socket bolts (BB) for each handle (12 bolts in total) and fully tighten with the provided Allen wrench.

Allen Wrench

Step 3

• Attach the bottle opener (E) to the body (D) using (2) M6x16mm hex socket bolts (BB) and tighten with the provided Allen wrench.
• Attach the cap catcher (F) to the body (D) by sliding it down over the 2 pre-installed bolts.

Allen Wrench

Step 4

• Note: The lid knobs (A) are pre-attached to the lid (B) with (2) pre-installed M5x35mm screws (CC) and washers (DD). Flip the lid upside down to reveal the lid knobs.
• Please remove the knobs using a Phillips screwdriver and re-assemble them on the lid right-side up.

Care & Maintenance

Manufacturer recommends the following care & maintenance:

• Cooler must be drained of water and completely dried in and out with a soft-clean cloth after every use.
• When the cooler is not in use for a prolonged period, it is recommended to store it in an enclosed dry area such as a storage shed or garage.
• During the season when the cooler is frequently used, it is recommended to use a weather-proof cover to protect the cooler when not in use.
• Periodically apply a light coat of automotive wax to the exterior of the cooler to protect & prolong the life & finish of the cooler.
• We strongly recommend not rolling the cooler on rough surfaces such as pavers when the cooler is full with ice & drinks.
• For further care & maintenance tips or questions, please call our customer service at 1- 888-287-0735, email us at service@permasteel.life or visit us at www.permasteel.life

Limited Warranty

PERMASTEEL INC. guarantees that this Product shall be free from defects in workmanship and materials for a period of 90 Days from the date of the original purchase. Our obligation under this warranty shall be limited to the replacement of parts during the warranty period. Our liability shall not extend beyond the replacement of parts. This warranty excludes normal wear & tear such as paint loss, discoloration and rust on the product, parts and components. This warranty also excludes any damage arising from any of the following: negligent use or misuse of the Product, use contrary to this User’s Manual or alterations by anyone. All warranty coverage is void if this cooler is ever used for commercial or rental purposes; this warranty is valid only in the USA. This warranty period of 90 Days shall not be extended or renewed for the repair, replacement of parts or compensation for the product. If your Product is defective or otherwise requires parts, please call our Permasteel Customer Service at 1-888-287-0735, between 8:00 a.m. to 5:00 p.m. PST. Email: service@permasteel.life or visit us at www.permasteel.life Permasteel Inc. will ship parts free of charge for a period of 30 days from the date of purchase. The consumer is responsible for shipping & handling and processing of the warranty claims after 30 days from the purchase date. Proof of purchase, like purchase receipt, must accompany any service requests.

We hope you enjoy your product and we are always here for you:

• Visit us at: www.permasteel.life
• Customer Service: 1-888-287-0735
• Email: service@permasteel.life

Distributed by
Permasteel Inc.
100 Exchange Place
Pomona,
CA 91768
Designed in California, Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>