PERMASTEEL PS-223 80-Qt Outdoor Patio Cooler with Removable Basin User Guide

Permasteel 80QT Cooler
Use & Care Guide
Model number: PS-223-80QT

PS-223 80-Qt Outdoor Patio Cooler with Removable Basin

Thank you for purchasing your new patio cooler from Permast We hope you enjoy your product.
If you have any questions, please call us at 1-888-287-0735 or visit us at www.permasteel.life

Important Information

Thank you for your purchase of our Patio Cooler. We sincerely hope you will enjoy using our fine products.

• Please take your time to read the instructions thoroughly and follow each step carefully for a safe and easy assembly.
• Please contact our customer service at 1-888-287-0735 if you have any questions.
• Please keep this manual for future reference.

CAUTION

1. Hand tools only, use of power tools could damage the product.
2. Remove all components, hardware and tools from the box before assembly. Please separate all the hardware and be sure they match with pg 4 of this manual.
3. Please consider recycling all applicable packaging material.

Parts List

If you are missing any parts or have damaged parts, please call 1-888-287-0735 M-F 8:00-5:00
PST. For replacement parts, visit us at www.permasteel.life

Hardware

The following hardware is provided in a poly bag.

M6x13mm Bolt: 18 pcs|
---|---
M6X16mm Bolt: 4 pcs|
M6x15mm Shoulder Bolt: 2 pcs|
Tools Included:|
M4x32mm Screw: 2 pcs
(Note: These screws are pre-attached to the lid knobs, please refer to page 11 for more details.)|

Tools
The following tools are required for assembly:

• Allen wrench (provided)
• Double open-end wrench (provided)
• Phillips screwdriver (not provided)

Assembly Instructions

Step 1

• Place the leg frames (G) on a clean and soft surface. Attach the bottom shelf (H) to the leg frames (G) with (4) M6x16mm bolts (BB) and tighten with the provided Allen wrench.

Note: Do not fully tighten the bolts until the bottom shelf is aligned with the holes on the leg frames.

Step 2

• Insert and thread the casters (J) into the leg frame (G) with the provided open end wrench.
• Insert and thread the casters with brake (K) into the other leg frame (G) with the provided open-end wrench.

Step 3

•  Attach the cross member (I) to the leg frames (G) using (4) M6x13mm bolts (AA) and fully tighten withthe provided Allen wrench.
  Note: The base assembly is now complete. Set aside the base until you are done with step 4.

Step 4

• Attach the side handles (C) to the body (D) using (12) M6x13mm bolts (AA), 6 bolts for each handle, and tighten with the provided Allen wrench.

Step 5

• With the assistance of a helper, lift the basin assembly and place on top of the base assembly.
  Make sure the rubber feet are inserted into the base assembly leg frame holes.

Step 6

• Attach the bottle opener (E) to the body (D) using (2) M6x13mm bolts (AA) and tighten with the provided Allen wrench.
• Attach the cap catcher (F) to the body (D) using (2) M6x15mm shoulder bolts (CC).

Step 7

• Note: The lid knobs (A) are pre-attached to the lid (B). Flip the lid upside down to reveal the lid knobs.
• Please remove the knobs using a Phillips head screwdriver and re-assemble them on the lid right-side up.
• Attach the drainage plug (L) to the body (D). Tighten with the provided double open-end wrench.
• Please be sure to install one rubber gasket on each side of the body basin and tighten the nut snugly with the provided wrench to prevent leaks.

Care & Maintenance

Manufacturer recommends the following care & maintenance: 

• Cooler must be drained of water and completely dried in and out with a soft-clean cloth after every use.
• When the cooler is not in use for a prolonged period, it is recommended to store it in an enclosed dry area such as a storage shed or garage.
• During the season when the cooler is frequently used, it is recommended to use a weather-proof cover to protect the cooler when not in use.
• Periodically apply a light coat of automotive wax to the exterior of the cooler to protect & prolong the life & finish of the cooler.
• We strongly recommend not rolling the cooler on rough surfaces such as pavers when the cooler is full with ice & drinks.
•  For further care & maintenance tips or questions, please call our customer service at 1-888-287-0735, email us at service@permasteel.life or visit us at www.permasteel.life

Limited Warranty

PERMASTEEL INC. guarantees that this Product shall be free from defects in workmanship and materials for a period of 90 Days from the date of the original purchase.
Our obligation under this warranty shall be limited to the replacement of parts during the warranty period. Our liability shall not extend beyond the replacement of parts.
This warranty excludes normal wear & tear such as paint loss, discoloration and rust on the product, parts and components. This warranty also excludes any damage arising from any of the following: negligent use or misuse of the Product, use contrary to this User’s Manual or alterations by anyone.
All warranty coverage is void if this cooler is ever used for commercial or rental purposes; this warranty is valid only in the USA.
This warranty period of 90 Days shall not be extended or renewed for the repair, replacement of parts or compensation for the product. If your Product is defective or  otherwise requires parts, please call our Permasteel Customer Service at 1-888-287-0735,
between 8:00 a.m. to 5:00 p.m. PST. Email: service@permasteel.life or visit us at www.permasteel.life 
Permasteel Inc. will ship parts free of charge for a period of 30 days from the date of purchase. The consumer is responsible for shipping & handling and processing of the warranty claims after 30 days from the purchase date.
Proof of purchase, like purchase receipt, must accompany any service requests.We hope you enjoy your product and we are always here for you:

Visit us at:
www.permasteel.lif
Customer Service: 1-888-287-0735
Email: service@permasteel.life

Distributed by
Permasteel Inc. 100 Exchange Place
Pomona, CA 91768
Designed in California,
Made in China

References

• Permasteel | Manufacturer of Patio Coolers & Kenmore Gas Grills
• Permasteel | Manufacturer of Patio Coolers & Kenmore Gas Grills

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>