PERMASTEEL PS-225-80QT Wood Outdoor Patio Cooler User Guide

PERMASTEEL PS-225-80QT Wood Outdoor Patio Cooler

Important Information

Thank you for your purchase of our Patio Cooler. We sincerely hope you will enjoy using our fine products.

• Please take your time to read the instructions thoroughly and follow each step carefully for a safe and easy assembly.
• Please contact our customer service at 1-888-287-0735 if you have any questions.
• Please keep this manual for future reference.

CAUTION

1. Hand tools only, use of power tools could damage the product.
2. Remove all components, hardware and tools from the box before assembly. Please separate all the hardware and be sure they match with pg 4 of this manual.
3. Please consider recycling all applicable packaging material.

Parts List

• If you have any missing or damaged parts, please call 1-888-287-0735 M-F 8:00-5:00 PST.
• For replacement parts, visit us at www.permasteel.life.

Hardware

The following hardware is provided in a poly bag.

M4x40mm Screw: 2 pcs
( Note: These screws are pre-attached to the lid knobs, please refer to page 9 for more details.)

Tools

The following tools are required for assembly:

• Allen wrench (provided)
• Double open-end wrench (provided)
• Phillips screwdriver (not provided)

Assembly Instructions

• Step 1
  • Turn the body (basin) upside down. Place it on a clean and soft surface. Attach 4 legs (G) to the body (D) with (2) M6x13mm bolts (AA) for each leg (8 bolts in total).
  • Note: Do not fully tighten the bolts. The legs should be loose so that it can be aligned with the holes on the cross members and bottom shelf.
• Step 2
  • Attach the 2 cross members (H) to the legs (G) using (8) M6x13mm bolts (AA).
  • Note: Do not fully tighten the bolts. The legs and cross members should be loose so that it can be aligned with the holes on the bottom shelf.
• Step 3
  • With the help of another person, attach the bottom shelf (C) to the legs (D) using (4) M6x13mm bolts (AA).
  • Note: Do not fully tighten the bolts until the bottom shelf is aligned with the holes on the legs.
  • Now tighten all the bolts left loose from step 1 and 2.
• Step 4
  • Insert and thread the casters (J) to the leg frame (G) and tighten with the provided double open-end wrench.
  • Insert and thread the casters with brakes (K) to the other leg frame (G) and tighten with the provided double open-end wrench.
• Step 5
  • Note: The lid knobs (A) are pre-attached to the lid (B) with (2) pre-installed M4x40mm screws (DD). Flip the lid upside down to reveal the lid knobs.
  • Please remove the knobs using a Phillips screwdriver and re-assemble them on the lid right-side up.
• Step 6
  • Attach the body handles (C) to the body (D) using (2) M6x16mm bolts (BB) for each handle (4 bolts in total) and fully tighten with the provided Allen wrench.
• Step 7
  • Attach the bottle opener (E) to the body (D) using (2) M6x13mm bolts (AA) and fully tighten with the provided Allen wrench
  • Attach the cap catcher (F) to the body (D) using (2) M6x13mm shoulder bolts (CC).
• Step 8
  • Attach the drainage plug (L) to the body (D) and tighten the nut with the provided double open-end wrench.
  • Please be sure to install one rubber gasket on each side of the body basin and tighten the nut snugly with the provided wrench to prevent leaks.

Care & Maintenance

Manufacturer recommends the following care & maintenance:

• Cooler must be drained of water and completely dried in and out with a soft-clean cloth after every use.
• When the cooler is not in use for a prolonged period, it is recommended to store it in an enclosed dry area such as a storage shed or garage.
• During the season when the cooler is frequently used, it is recommended to use a weather-proof cover to protect the cooler when not in use.
• Periodically apply a light coat of automotive wax to the exterior of the cooler to protect & prolong the life & finish of the cooler.
• We strongly recommend not rolling the cooler on rough surfaces such as pavers when the cooler is full of ice & drinks.
• For further care & maintenance tips or questions, please call our customer service at 1-888-287-0735, email us at service@permasteel.life, or visit us at www.permasteel.life.

Limited Warranty

• PERMASTEEL INC. guarantees that this Product shall be free from defects in workmanship and materials for 90 Days from the date of the original purchase.
• Our obligation under this warranty shall be limited to the replacement of parts during the warranty period. Our liability shall not extend beyond the replacement of parts.
• This warranty excludes normal wear & tear such as paint loss, discoloration, and rust on the product, parts, and components.
• This warranty also excludes any damage arising from any of the following: negligent use or misuse of the Product, use contrary to this User’s Manual, or alterations by anyone.
• All warranty coverage is void if this cooler is ever used for commercial or rental purposes; this warranty is valid only in the USA.
• This warranty period of 90 Days shall not be extended or renewed for the repair, replacement of parts, or compensation for the product. If your Product is defective or otherwise requires parts, please call our Permasteel Customer Service at 1-888-287-0735, between 8:00 a.m. to 5:00 p.m.
• PST. Email: service@permasteel.life. or visit us at www.permasteel.life.
• Permasteel Inc. will ship parts free of charge for 30 days from the date of purchase.
• The consumer is responsible for shipping & handling and processing the warranty claims after 30 days from the purchase date.
  Proof of purchase, like purchase receipt, must accompany any service requests.

We hope you enjoy your product and we are always here for you:

• Visit us at: www.permasteel.life.
• Customer Service: 1-888-287-0735
• Email: service@permasteel.life.
• Distributed by
• Permasteel Inc.
• 100 Exchange Place
• Pomona,
• CA 91768
• Designed in California, Made in China

Thank you for purchasing your new patio cooler from Permasteel. We hope you enjoy your product. If you have any questions, please call us at 1-888-287-0735 or visit us at www.permasteel.life.

• Model number: PS-225-80QT

References

• Permasteel | Manufacturer of Patio Coolers & Kenmore Gas Grills
• Permasteel | Manufacturer of Patio Coolers & Kenmore Gas Grills

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>