PS-203-F1-80QT Permasteel Cooler User Guide

Permasteel 80QT Cooler
Use & Care Guide
Model number: PS-203-F1-80QT

Thank you for purchasing your new patio cooler from Permasteel.
We hope you enjoy your product.
If you have any questions, please call us at 1-888-287-0735
or visit us at www.permasteel.life

Important Information

Thank you for your purchase of our Patio Cooler.
We sincerely hope you will enjoy using our fine products.

• Please take your time to read the instructions thoroughly and follow each step carefully for a safe and easy assembly.
• Please contact our customer service at 1-888-287-0735 if you have any questions.
• Please keep this manual for future reference.

CAUTION

1. Hand tools only, use of power tools could damage the product.
2. Remove all components, hardware and tools from the box before assembly. Please separate all the hardware and be sure they match with pg 4 of this manual.
3. Please consider recycling all applicable packaging material.

Parts List

If you have any missing or damaged parts, please call 1-888-287-0735 M-F 8:00-5:00 PST.
For replacement parts, visit us at www.permasteel.life

Hardware

The following hardware is provided in a poly bag.
M8x16mm Hex Socket Bolt: 8 pcs

M6x16mm Hex Socket Bolt: 10 pcs M6x16mm Bolt: 2 pcs
(Note: These screws are pre-attached to the lid knobs, please refer to page 8 for more details.)

M8 Washer: 8 pcs Tools Included: M5x35mm Phillips Screw & Washer: 2 pcs each
(Note: These screws are pre-attached to the lid knobs, please refer to page 9 for more details.)

Tools
The following tools are required for assembly:

• Allen wrench (provided)
• Phillips screwdriver (not provided)

Assembly Instructions

Step 1

• Turn the body (basin) upside down and place it on a clean and soft surface. Attach 4 legs (G) to the body (D) with (4) M8x16mm hex socket bolts (AA) and (4) M8 washers (EE).
  Note: Do not fully tighten the bolts. The legs should be loose so that it can be aligned with the holes on the bottom shelf.

Step 2

• Attach the bottom shelf (H) to the legs (G) with (4) M8x16mm hex socket bolts (AA) and (4) M8 washers (EE).
  Note: Do not fully tighten the bolts. The legs and bottom shelf should be loose so they can be  aligned properly.

• Now fully tighten all the bolts left loose from step 1 and the beginning to step 2.

• Insert and thread casters (I) through the two legs and into the bottom panel holes on the same side.

• Insert and thread casters (J) through the other two legs and into the bottom panel holes on the same side.

Step 3

• Attach the body handles (C) to the body (D) using (4) M6x16mm hex socket bolts (BB) for each handle (8 bolts in total) and fully tighten the bolts with the provided Allen wrench.

Step 4

• Attach the bottle opener (E) to the body (D) using (2) M6x16mm hex socket bolts (BB) and tighten the bolts with the provided Allen wrench.
• Attach the cap catcher (F) to the body (D) by sliding it down over the 2 pre-installed bolts (DD).

Step 5

• Note: The lid knobs (A) are pre-attached to the lid (B) with (2) pre-installed M5x35mm Phillips screws (CC) and washers (FF). Flip the lid upside down to reveal the lid knobs.
• Please remove the knobs using a Phillips screwdriver and re-assemble them on the lid right-side up.

Care & Maintenance

Manufacturer recommends the following care & maintenance:

•  Cooler must be drained of water and completely dried in and out with a soft-clean cloth after every use.
• When the cooler is not in use for a prolonged period, it is recommended to store it in an enclosed dry area such as a storage shed or garage.
• During the season when the cooler is frequently used, it is recommended to use a weather-proof cover to protect the cooler when not in use.
• Periodically apply a light coat of automotive wax to the exterior of the cooler to protect & prolong the life & finish of the cooler.
• We strongly recommend not rolling the cooler on rough surfaces such as pavers when the cooler is full with ice & drinks.
• For further care & maintenance tips or questions, please call our customer service at 1-888-287-0735, email us at [email protected] or visit us at www.permasteel.life

Limited Warranty

PERMASTEEL INC. guarantees that this Product shall be free from defects in workmanship and materials for a period of 90 Days from the date of the original purchase.
Our obligation under this warranty shall be limited to the replacement of parts during the warranty period. Our liability shall not extend beyond the replacement of parts.
This warranty excludes normal wear & tear such as paint loss, discoloration and rust on the product, parts and components. This warranty also excludes any damage arising from any of the following: negligent use or misuse of the Product, use contrary to this User’s Manual or alterations by anyone.
All warranty coverage is void if this cooler is ever used for commercial or rental purposes; this warranty is valid only in the USA.
This warranty period of 90 Days shall not be extended or renewed for the repair, replacement of parts or compensation for the product. If your Product is defective or otherwise requires parts, please call our Permasteel Customer Service at 1-888-287-0735, between 8:00 a.m. to 5:00 p.m. PST. Email: [email protected] or visit us at www.permasteel.life 
Permasteel Inc. will ship parts free of charge for a period of 30 days from the date of purchase. The consumer is responsible for shipping & handling and processing of the warranty claims after 30 days from the purchase date.
Proof of purchase, like purchase receipt, must accompany any service requests.

We hope you enjoy your product and we are always here for you:
Visit us at: www.permasteel.life 
Customer Service: 1-888-287-0735
Email: [email protected]

Distributed by
Permasteel Inc.
100 Exchange Place
Pomona, CA 91768
Designed in California, Made in China

Documents / Resources

| PERMASTEEL PS-203-F1-80QT Permasteel Cooler [pdf] User Guide
PS-203-F1-80QT Permasteel Cooler, PS-203-F1-80QT, Permasteel Cooler, Cooler
---|---

References

• Permasteel | Manufacturer of Patio Coolers & Kenmore Gas Grills
• Permasteel | Manufacturer of Patio Coolers & Kenmore Gas Grills

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>