LG DLE6100M Electric Dryer Instruction Manual
- May 15, 2024
- LG
Table of Contents
LG DLE6100M Electric Dryer
- Pressing the Start/Pause button without selecting a cycle will cause the Normal cycle to begin. For safety reasons, you must press and hold the Start/Pause button for 1 second to start the cycle.
Before Operating Your Dryer
Read your dryer Owner’s Manual. It has important safety and warranty
information. It also has many suggestions for dryer operation and solving
problems.
Please consult your Owner’s manual for more details. To contact the LG
customer service, please call or i visit our website at http://us.lge.com or
http://ca.lge.com
Installation
- The current duct should be cleaned prior to installing it on your new dryer.
- Good ventilation is required for proper operation of your dryer. The dryer should be installed on a stable and level floor.
- One end of the duct will connect to your dryer and the other end should be vented to the outside of your home.
If the duct is clogged it may cause longer drying times and shorten the life
of your dryer. 
Operating instructions
-
Before the operation, clean the lint filter.
-
Press the power button.
(In case of gas dryer, check if gas valve is open) -
Sort and load laundry.
-
Select cycle according to the fabric types.
-
Use the WRINKLE CARE option when unloading is delayed.
-
Press the start button.
This option helps to reduce the energy consumption in the Normal cycle depending on the load baffle size. When the Energy Saver option is selected, the cycle begins with an air dry section and the drying time is increased. This option is turned on by default. To reduce drying time, disable the (on some models) option by pressing and holding the Energy Saver button for 3 seconds.
Check (Clean) Filter Light
When the dryer is turned on, this light flashes as a reminder that the lint
filter must be cleaned for each load. The light goes out when the cycle is
started.
Pressing the Start/Pause button without selecting a cycle will cause the Normal cycle to begin. For safety reasons, you must press and hold the Start/Pause button for 1 second to start the cycle.
Flow Sense Light:
This light does not indicate a problem with your dryer, but rather a
restriction in your home exhaust system. This issue can be easily fixed
without calling for service. Please check for the following conditions if the
Flow Sense light is lit or you are experiencing longer than usual dry times:
-
Make sure that the exhaust connecting to the dryer is not kinked.
-
Make sure that the dryer duct is clean and free of buildup – one way to check if the exhaust is clogged is to start the dryer on a normal cycle, go outside where the dryer is vented and check the airflow. If there is no airflow or if the airflow is weak, then you may have a restriction (lint buildup) that needs to be removed Using the dryer while the “Flow Sense” light is on may create an unsafe environment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>