Hamilton Beach HB608BB Pro SteamMax 3000W Steam Iron

Product Information

Specifications

• Product Dimensions: 15.5cm(H) x 13.3cm(W) x 31.1cm(L)
• Power: 3000W
• Net Weight: Approx. 1.35kg

Product Usage Instructions

Important Safeguards
When using the Pro SteamMax 3000W Steam Iron, follow these safety precautions:

1. Read all instructions.
2. Use the iron for its intended purpose of ironing fabrics on a board.
3. Avoid ironing or steaming fabrics while being worn on the body to prevent burns or injuries.

How to Use Guide

Main Features:

• A. Steam regulating Knob
• B. Burst steam button
• C. Spraying button
• D. Indicator light
• E. Cord
• F. Temperature regulating knob
• G. Water tank
• H. Ceramic Coating Soleplate
• I. Spraying mouth
• J. Cover of water filler
• K. Self-clean button

Before First Use

How to Fill with Water:

1. Ensure the iron is turned off and unplugged.
2. Set the steam knob to ‘0’ position.
3. Open the water fill opening and fill the tank up to the ‘MAX’ line.
4. Pour out any remaining water after use.

Note: Use tap water only, avoid water additives or substitutes as they may damage the iron or stain fabrics.

How to Use Dry Iron

1. Position the iron vertically.
2. Plug into power outlet.
3. Set steam regulating knob to MIN position.
4. Preheat until indicator light goes out.

How to Use the Spray Feature

1. Check fabric label for ironing instructions.
2. Spray feature is useful for stubborn wrinkles and extra dampening.
3. Pump the Spray Mist knob when needed.

How to Use as Steam Iron

1. Fill the iron with water as instructed.
2. Position vertically and adjust temperature control dial to steam setting.
3. Plug into outlet and preheat until indicator light turns off.
4. Adjust temperature for fabric type and start steam ironing.

FAQ

• Q: Can I use scented water in the steam iron?
  A: No, avoid using water additives or substitutes like scented water as they can damage the iron or stain fabrics.

• Q: What should I do if the water leaks from the soleplate during steam ironing?
  A: Ensure the temperature setting is at ‘MAX’ for steam ironing; otherwise, water may leak. Adjust the temperature control dial accordingly.

SPECIFICATIONS

• Product Dimensions: 15.5cm(H) x 13.3cm(W) x 31.1cm(L)
• Power: 3000W
• Net Weight: Approx. 1.35kg

IMPORTANT SAFEGUARDS

When using electrical appliances especially when children are present, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons including the following:

1. Read all instructions.
2. Use the iron for its intended purpose, for ironing fabrics on a board.
3. To protect against burns or injury to persons, do not iron or steam fabrics while being worn on the body.
4. The iron should always be turned ‘OFF’ before plugging or unplugging from the outlet. Never pull cord to disconnect from outlet, instead, grasp plug and pull to disconnect.
5. Do not allow cord to touch hot surface. Allow the iron to cool completely before storing away.
6. Always disconnect iron from electrical outlet for filling or emptying water and when not in use.
7. To avoid risk of electric shock, do not operate iron with a damaged cord or if the ironhas been dropped or damaged. For repair, take it to an authorised service centre or electrician. Alternatively please contact our customer service team.
8. Close supervision is necessary for this appliance being used by or near children.
9. Do not leave iron unattended while connected to power or on an ironing board.
10. Burns can occur from touching hot metal parts, hot water, or steam. Hot water may leak from the iron. Use caution when filling or turning the steam iron upside down.
11. To protect against burns or injury to persons, do not direct steam toward the body when ironing.
12. The iron must be used and rested on a stable surface. When placing the iron on its stand, ensure that the surface on which the stand is placed is stable.
13. Be aware of potential injury from misuse.
14. For domestic household use only.
15. Save these instructions for future use.

HOW TO USE GUIDE

MAIN FEATURES:

• A. Steam regulating Knob
• B. Burst steam button
• C. Spraying button
• D. Indicator light
• E. Cord
• F. Temperature regulating knob
• G. Water tank
• H. Ceramic Coating Soleplate
• I. Spraying mouth
• J. Cover of water filler
• K. Self-clean button

BEFORE FIRST USE:

• HOW TO FILL WITH WATER:
  Make sure the iron is turned off and the power cord is unplugged from the electrical outlet.

1. Set the ‘Variable’ steam knob to the ‘0’ position before filling the iron with water.
2. Open the ‘Water Fill’ Opening and fill the Tank up to the ‘MAX’ Line on the tank.
3. The water level can be observed through the transparent part of the tank, when iron is placed vertically. In case of water level becomes low, refill the tank, following the procedure described in steps 1 to 3 above.
4. Pour out the remaining water after use.  

NOTE: Most tap water can be used in this iron. Do not use water additives or substitute water such as linen or scented water in the steam iron, they can stain fabrics or damage the iron. Do not fill the water more than the ‘MAX’ position.

• HOW TO USE DRY IRON:

1. Position the iron vertically.
2. Plug the iron into power outlet.
3. Set Steam regulating Knob to MIN position.
4. Preheat the iron until the indicator light goes out.
5. Now dry ironing can begin.

• HOW TO USE THE SPRAY:

1. Before using the spray feature, check the fabric label for ironing instructions because some fabrics may be spotted or stained with moisture.
2. The spray feature is particularly helpful for removing stubborn wrinkles and where extra dampening is needed. The spray may be use with steam or dry ironing. Simply pump the Spray Mist knob when spray is desired.

• HOW TO USE AS STEAM IRON:

1. Fill the iron as described in ‘How to fill with water’.
2. Position the iron vertically and turn the Temperature Control Dial to the steam position.
3. Plug the Cord into the electrical outlet.
4. Set the Temperature Control Dial to the steam position. Steam Ironing is only possible when at higher temperature settings indicated with ‘MAX’ mark; otherwise the water will leak from the soleplate.
5. Preheat the iron until the indicator light goes out. The light will turn off when the indicated setting reaches the correct temperature.
6. Turn the Temperature regulating knob to the required setting for different types of fabric.
7. Now steam ironing can begin.

• HOW TO USE THE BURST STEAM FUNCTION:

1. The burst of steam feature provides additional steam for removing stubborn wrinkles. It may be used with steam or dry ironing.
2. Press the Power Steam button to release the surge of steam. Pressing the button several times may be necessary to prime the surge system.
3. Wait a few seconds for the steam to penetrate the fabric before pressing the button again for more steam.  

NOTE: For optimum steam quality, do not apply more than three successive shots after the indicator light goes off.

• AFTER EACH USE:

1. Turn the iron off and unplug.
2. Empty the iron immediately after using. Do not store the iron with water in it.
3. Wait until the iron has cooled before storing it.
4. After letting iron cool down completely, store the iron vertically in a safe place. After unplugging and cooling the iron, simply wipe off with a damp cloth and if necessary, use a mild detergent.  

NEVER USE ANY HARSH CLEANERS.

• SOLEPLATE:
  Starch and other residue may be easily removed from the soleplate with a damp cloth. To avoid scratches the finishing, never use a metallic pad to clean the Soleplate, and never place the iron on a rough surface. If synthetics are ironed at too high temperature not only is the fabric usually ruined, but the iron Soleplate is often covered with the melted remains of the synthetic fabric. The best way to remove synthetic residue from the Soleplate is to heat the iron and to iron over an old cotton rag.
  CAUTION: Never use steam iron cleaners in the iron, since they may damage the working parts of the iron.

CLEANING & CARE

IMPORTANT: Your iron will give the best ironing results and last longest if you apply the Self Cleaning once a month, or more depending upon the usage.

1. Half fill the water tank with water.
2. Position the iron on its rear heel.
3. Select the temperature control dial to ‘MAX’.
4. Plug in the iron to electrical outlet.
5. Allow the iron to heat up until the indicator light first goes out.
6. Unplug the iron from the electrical outlet.
7. Keep the iron horizontally over the sink.
8. Press down the ‘Self Clean’ button all the time. Boiling water and steam will now emit from the holes in the soleplate.
9. Move the iron forwards and backwards white this happens; go on letting steam and water escape until the water tank is virtually empty.
10. Release the ‘Self Clean’ button.
11. Plug in the iron
12. Set the temperature dial to the ‘MAX’ position, let the iron heat up again, the remainder of the water inside the steam chamber will now vaporize and leave the iron through the soleplate.

During this process of dry steaming it is advised to use it over an old piece of cloth.

DISPOSING OF THE APPLIANCE

Appliances bearing the symbol shown here may not be disposed of in domestic rubbish. You are required to dispose of old electrical and electronic appliances like this separately. Please visit www.recycle- more.co.uk or www.recyclenow.co.uk for access to information about the recycling of electrical items.
Please visit www.weeeireland.ie for access to information about the recycling of electrical items purchased in Ireland.
The WEEE directive, introduced in August 2006, states that all electrical items must be recycled, rather than taken to landfill. Please arrange to take this appliance to your local Civic Amenity site for recycling, once it has reached the end of its life.

Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

GUARANTEE & SERVICE

This product is covered by a 12-month warranty, please read the guarantee and service carefully and keep for future use.
Please Note: To maintain the validity of the warranty, it is imperative to register it within the initial 30 days of purchase. Any registration made beyond this time frame will result in the warranty being deemed void.
This warranty applies to products purchased and used in the UK. This is the only express warranty for this product and is in lieu of any other warranty or condition.

This product is warranted to be free from defects in material and workmanship for a period from the date of original purchase; this timeframe can vary based on the product. Please refer to our product pages or contact our customer service team if you are unsure of the duration of the products warranty period. During this period, your exclusive remedy is repair or replacement of this product or any component found to be defective, at our option; however, you are responsible for all costs associated with returning the product to us and our returning a product or component under this warranty to you. If the product or component is no longer available, we will replace with a similar one of equal or greater value.
This warranty does not cover glass, filters, wear from normal use, not in conformity with the printed directions, or damage to the product resulting from accident, alteration, abuse, or misuse. This warranty extends only to the original consumer purchaser or gift recipient. Keep the original sales receipt, as proof of purchase is required to make a warranty claim. This warranty is void if the product is used for other than single-family household use or subjected to any voltage and waveform other than as specified on the rating label (e.g., 120V ~ 60 Hz). We exclude all claims for special, incidental, and consequential damages caused by breach of express or implied warranty. All liability is limited to the amount of the purchase price. Every implied warranty, including any statutory warranty or condition of merchantability or fitness for a particular purpose, is disclaimed except to the extent prohibited by law, in which case such warranty or condition is limited to the duration of this written warranty.

To make a warranty claim, do not return this appliance to the store.
Please call 01274 752624 or email customerservice@hamiltonbeach.co.uk. For faster service, locate the model number on the rating label on your appliance. Alternatively, please scan the QR code below to be directed to our warranty registration page:

CUSTOMER SERVICE
If you have any questions or concerns about your new product, please contact our helpful Customer Support Team:

01274 752624
customerservice@hamiltonbeach.co.uk
www.hamiltonbeach.co.uk

Please have your Model No. available. This can be found on the front cover of this instruction manual and on the appliance’s rating label.

Love your purchase?Please leave us a review!

The user manual can also be downloaded from our website: www.hamiltonbeach.co.uk

Iron with Confidence
Trusted quality for over 100 years.
Discover the innovative and dependable products that have made Hamilton Beach a trusted name since 1910.
We make your ironing experience easier.

Ironwithconfidence

Join our community!
Follow us for news, recipe ideas, offers and tips…

www.hamiltonbeach.co.uk

The user manual can also be downloaded from our website: www.hamiltonbeach.co.uk

References

• Hamilton Beach
• Everything you need to know to Recycle More
• WEEE Ireland Waste Electrical and Electronic Equipment Recycling

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>