sktome 2rd Generation i9 Portable Voice Changer User Guide
- June 14, 2024
- sktome
Table of Contents
sktome 2rd Generation i9 Portable Voice Changer
IMPORTANT INFORAMTION
First of all, our products have been strictly tested when they leave the factory, and the products you get will definitely work. If you encounter the product cannot be turned on (long press the power button for 3 seconds to turn on) or out of work after a few uses, it is maybe no power. To ensure the normal use of the product, we recommend charging the product for 4-5 hours before use.
Connection Diagram
Warm prompt
As iphone 7 and later and some Android phones do not have a 3.5mm round jack, you need to bring your own adapter to use. Details of each key function
Details of each key function
8 Reverberation Singing Models
Short click [Mode] to switch singing modes
[Normal Mode]: Normal sound, suitable for chat.
[Other Mode]: For different usage scenarios, the reverberation effect is
different.
8 Voice Changer Functions
[Female to male mode]: This mode is suitable for girls. There are 4
choices of voice change, namely “Baby” “Youth” “Male” “King”
[Male to female mode]: This mode is suitable for boys. There are 4
choices of voice change, namely “Lolita” “Youth” “Female” “Witch”
[Finetuning]: Fine tuning function, specially designed for voice change, you can tap these two buttons lightly after changing the voice, which can make your voice change richer and more interesting
4 Sound Adjustment
[MIC]: Adjust the microphone volume.
[VOICE]: Adjust the monitor volume.
[MUSIC]: Adjust the accompaniment volume. tips: You can connect via
Bluetooth, search for Bluetooth “I9” on your mobile phone, and just connect.
[ECHO]: Adjust the reverb effect.
4 Special Functions
1_ Dodge Function:
When the anchor interacts with the fans, it will automatically lower the
volume of accompaniment, when you stop talking, the accompaniment resumes
normal playback.
2_ Purge Original Function:
You just need to press one key to eliminate the original sound, thereby making
the music turn into accompaniment. Just show your singing voice.
3_ Noise Control Function:
you just need to shortly press this key to reduce the external noise, which
make you feel like being in recording studio. Recommended for outdoor use.
4_ Electronic Sound Function:
Common Problem
-
The sound card doesn’t work after the first or several uses
Answer: please charge the sound card first and try again, it is recommended to charge it more than 4 hours for the first time. -
I can’t hear any sound, how to solve it
Answer: try unplugging the earphone/headset again, and then inserting the earphone/headset before turning them on.
check the listening volume and increase the volume button (“VOICE” button on the sound card and “volume” knob on the headset). -
There will be noise during the live broadcast
Answer：
1. lower the volume of the microphone.
2. check that the headset and microphone are fully plugged into their respective positions.
3. turn off the headset and turn it on again. -
It has Echo when used
Answer: If you hear an echo when talking with your friend, you can turn the “VOICE” to the lowest -
How to connect this live sound card to Bluetooth
Answer: Long press the power button for 3 seconds to turn on the sound card, search for “I9” on your phone and click the link. it has a memory function and will automatically pair with your device when it works again.
Remind
If you encounter any problems during use, such as product quality problems or refunds, you can contact us immediately and we will reply you within 10 hours. Thank you for your support and understand.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>