Kenmore 251.55530510 Dehumidifier User Guide
- June 16, 2024
- Kenmore
Table of Contents
- WARRANTY
- Master Protection Agreements
- INSTRUCTIONS
- ELECTRICAL REQUIREMENTS
- INSTALLING YOUR DEHUMIDIFIER
- KEY FEATURES OF YOUR DEHUMIDIFIER
- CONTROL PANEL 55530
- WATER DISPOSING OPTIONS
- CARE AND MAINTENANCE
- TROUBLESHOOTING
- PRODUCT SPECIFICATION
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Kenmore 251.55530510 Dehumidifier User Guide
WARRANTY
KENMORE LIMITED WARRANTY
FOR ONE YEAR from the date of sale this appliance is warranted against defects
in material or workmanship when it is correctly installed, operated and
maintained according to all supplied instructions.
WITH PROOF OF SALE, a defective appliance will receive free repair or
replacement at option of seller.
For warranty coverage details to obtain free repair or replacement, visit the
web page: www.kenmore.com/warranty This warranty applies for only 90 DAYS from
the sale date inthe United States, and is void in Canada, if this appliance is
ever used for other than private household purposes.
This warranty covers ONLY defects in material and workmanship, and wUl NOT pay for:
- Expendable items that can wear out from normal use, including but not limited to filters, belts, bags or screw-in base light bulbs.
- A service technician to clean or maintain this appliance, or to instruct the user in correct appliance installation, operation and maintenance.
- Service calls to correct appliance installation not performed by Sears authorized service agents, or to repair problems with house fuses, circuit breakers, house wiring, and plumbing or gas supply systems resulting from such installation.
- Damage to or failure of this appliance resulting from installation not performed by Sears authorized service agents, including installation that was not in accord with electrical, gas or plumbing codes.
- Damage to or failure of this appliance, including discoloration or surface rust, if it is not correctly operated and maintained according to all supplied instructions.
- Damage to or failure of this appliance, including discoloration or surface rust, resulting from accident, alteration, abuse, misuse or use for other than its intended purpose.
- Damage to or failure of this appliance, including discoloration or surface rust, caused by the use of detergents, cleaners, chemicals or utensils other than those recommended in all instructions supplied with the product.
- Damage to or failure of parts or systems resulting from unauthorized modifications made to this appliance.
- Service to an appliance if the model and serial plate is missing, altered, or cannot easily be determined to have the appropriate certification logo
Disclaimer of implied warranties; limitation of remedies
Customer’s sole and exclusive remedy under this limited warranty shall be
product repair or replacement as provided herein. Implied warranties,
including warranties of merchantability or fitness for a particular purpose,
are limited to one year or the shortest period allowed by law. Seller shall
not be liable for incidental or consequential damages. Some states and
provinces do not allow the exclusion or limitation of incidental or
consequential damages, or limitation on the duration of implied warranties of
merchantability or fitness, so these exclusions or limitations may not apply
to you.
This warranty applies only while this appliance is used in the United States or Canada*.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
In-home repair service is not available in all Canadian geographical areas, nor will this warranty cover user or servicer travel and transportation expenses if this product is located in a remote area (as defined by Sears Canada Inc.) where an authorized servicer is not available.
Sears Brands Management Corporation, Noffman Estates, IL 60179 Sears Canada Inc., Toronto, Ontario, Canada M5B 203
Master Protection Agreements
Congratulations on making a smart purchase. Your new Kenmore ® product is designed and manufactured for years of dependable operation. But like all products, it may require preventive maintenance or repair from time to time. That’s when having a Master Protection Agreement can save you money and aggravation.
The Master Protection Agreement also helps extend the life of your new product. Here’s what the Agreement* includes:
- Parts and labor not just for Arepairing defects, but to help keep products operating properly under normal use. Our coverage goes weU beyond the product warranty. No deductibles, no functional failure excluded from coverage– real protection.
- Expert service by a force of more than 10,000 authorized Sears service technicians, which means someone you can trust will be working on your product.
- Unlimited service caUs and nationwide service, as often as you want us, whenever you want us.
- “No4emon” guarantee- replacement of your covered product if four or more product failures occur within twelve months.
- Product replacement if your covered product can’t be fixed.
- Annual Preventive Maintenance Check at your request- no extra charge.
- Fast help by phone- we carl it Rapid Resolution – phone support from a Sears representative on all products. Think of us as a “talking owner’s manual.”
- Power surge protection against electrical damage due to power fluctuations.
- $250 Food Loss Protection annually for any food spoilage that is the result of mechanical failure of any covered refrigerator or freezer.
- Rental reimbursement if repair of your covered product takes longer than promised.
- 25% discount off the regular price of any non-covered repair service and related installed parts
Once you purchase the Agreement, a simple phone call is all that it takes for you to schedule service. You can call anytime day or night, or schedule a service appointment online.
The Master Protection Agreement is a risk free purchase. If you cancel for any reason during the product warranty period, we will provide a full refund. Or, a prorated refund anytime after the product warranty period expires. Purchase your Master Protection Agreement today!
- Some limitations and exclusions apply. For prices and additional information in the U.S.A. caU 1=800=827=6655,
- Coverage in Canada varies on some items. For full details call Sears Canada at 1=800=361=6665.
- Seers Installation Service
For Sears professional installation of home appliances, garage door openers, water heaters, and other major home ite ms, in the U.S.A. or Canada carl 1=800-4-MY=HOME®.
INSTRUCTIONS
iMPORTANT CAUTIONS FOR USING YOUR DEHUMiDiFiER.
To reduce the risk of fire, electrical shock, injury, or damage to the dehumidifier, these safety precautions must be followed:
Safety
- Do not place the power cord near a heater.
- Do not use an electrical outlet near flammable or combustible materials such as gasoline, propane, paint thinners, etc.
- Do not disassemble or modify dehumidifier parts or components. It may cause electric shock and failure.
- Plug in the power cord properly.
- Do not turn the unit on and off by inserting or pulling out the power plug.
- Do not damage the power cord or use an unspecified power cord.
- Do not modify power cord length.
- Do not share the outlet with another appliance.
- Always plug into a grounded outlet. Not grounding unit may cause electrical shock.
- Unplug the unit if it emits strange sounds, odors, or smoke.
- Do not use an electrical outlet if it is loose or damaged.
- Do not operate or plug in unit with wet hands or in a wet environment.
- Ventilate area before operating dehumidifier.Check for the presence of natural gas or the buildup of other combustible vapors.
- Do not clean the dehumidifier with water. Water may enter the unit and degrade the insulation resulting in an electrical shock.
- If water enters the product, turn off the dehumidifier’s power switch, then unplug the unit. Do not plug in unit until it has been inspected by an authorized repair service.
- Because the fan rotates at high speed during operation, always unplug dehumidifier before attempting any recommended maintenance or cleaning.
- Do not block the inlet or outlet. It may cause unit to fail or to operate inefficiently,
- Do not remove plug from outlet by pulling on the cord.
- When not in use, turning the unit off will save energy. Unplug the dehumidifier when not using for long periods of time.
- When removing the filter, be aware that some metal parts may have sharp edges and may cause injury.
- Do not use the water collected in the bucket for drinking purposes. It is not sanitary and could cause illness.
- Do not allow children to play with this product.
Tips
- Auto is the suggested setting for typical everyday use.
- Make sure the dehumidifier is the correct size for the area you want to dehumidify. It is not designed to dehumidify the entire house. For proper operation, the dehumidifier should only be placed on a level floor.
- Close aft doors, windows and other open= ings to the room. The dehumidifier must operate in an enclosed area to be effective.
- To clean, use a soft cloth; do not use wax, thinners, or strong detergents as they may change the color of the unit or cause surface damage.
- Be sure to replace the bucket properly after emptying to prevent water from collecting on the floor causing damage to some types of flooring.
- Do not put a pet or house plant where it will be exposed to direct air flow. This could injure the pet or plant.
- Operation without filter will cause unit failure. Insert the filter securely. Clean itevery two weeks. (See Care and Maintenance section in this manual.)
ELECTRICAL REQUIREMENTS
OBSERVEALL LOCAL CODES AND ORDINANCES.
DO NOT, UNDER ANY CIRCUMSTANCES, REMOVE THE POWER SUPPLY CORD GROUND PRONG.
ELECTRICAL GROUND iS REQUIRED ON THiS APPLIANCE.
A 115=VOLT 60Hz, AC ONLY, 15A FUSED AND PROPERLY GROUNDED ELECTRICAL SUPPLY iS REQUIRED.
A time delay fuse or time delay circuit breaker is recommended. Use a dedicated circuit serving only this appliance.
NOTE : If an extension cord must be used, the cord must be a minimum of 14AWG, and rated not less than 1875 watts, or 20A.
RECOMMENDED GROUNDING METHOD
For your personal safety, this appliance must be grounded. This appliance has
a power supply cord with a 3-prong grounded plug. To minimize possible shock
hazard, the cord must be plugged into a matching grounded electrical outlet
that complies with the latest edition of the National Electrical Code and all
local codes and ordinances.
If a grounded 3-prong electrical outlet is not available, it is the personal responsibility and obligation of the customer to have one installed by a qualified electrician.
**WARNING
**
ELECTRICAL SHOCK HAZARD
- Plug into a grounded 3-prong outlet.
- Do not remove ground prong
- .Do not use a two-prong adapter
Failure to follow these instructions can result in death, fire or electrical shock.
INSTALLING YOUR DEHUMIDIFIER
- Install the dehumidifier on a level floor strong enough to support the unit with a full bucket of water.
- For best performance, allow at least 12- 18 inches of air space on all sides of the unit for good air circulation.
- Keep all outside doors, windows and other openings closed when operating the dehumidifier. Humid outdoor air will add to the unit’s workload.
- For maximum efficiency, install your dehumidifier in an area where the temperature will not fall below 65°R,
- Leave the dehumidifier in an upright position for 30 minutes before turning on.
DEFROST OPERATION
The dehumidifier has a built=in defrost control that senses frost buildup on the evaporator coils.
During defrosting, the compressor will automatically turn off; the fan will continue running to defrost the coils.
CHOOSING THE PROPER LOCATION
Use the dehumidifier:
- in the basement to help prevent moisture damage.
- in the kitchen, laundry room, bathroom, and spa/exercise areas that have excessive moisture.
- to prevent moisture damage anywhere books or valuables are stored.
- during construction or remodeling to reduce drying time for drywall and paint; however, check and clean filter often.
AUTOMATIC SHUT OFF
-
When the bucket is full, or when the bucket is not in the proper position, the Bucket
Full light goes on and the unit automatically shuts off. -
The bucket must be placed in the proper position for the dehumidifier to work. The light will stay on and the dehumidifier will not run if the bucket is not in the proper position.
-
The dehumidifier will shut off once the desired humidity setting is reached, plus or minus 5% Relative Humidity (RH).
WARNING
To reduce the risk of fire, electric shock or injury to persons, read the important SAFETY INSTRUCTIONS found on page 3 before operating this appliance.
KEY FEATURES OF YOUR DEHUMIDIFIER
CONTROL PANEL 55530
POWER ON/OFF (1)
Pressing Power button once turns the dehumidifier “ON” and pressing it again
turns the dehumidifier “OFF.”
Settings (2)
Press this key to cycle through the control panel settings from Humidity to
Cycle Timer to Delay Start. The indicator lights will show which setting you
are in.
Humidity (9)
When the unit is turned on the control panel will default to the Humidity
setting. You may also use the Settings key to enter the Humidity setting. In
this setting you can manually select the desired humidity level by pressing
the Up or Down arrow keys (4/5)o Humidity values are changed in 5% increments
ranging from 35% to 70%. The humidity setting is shown in the display window
(8). Pressing the Down arrow key when the displayed value is 35% will cause
the unit to operate continuously. In continuous operation, Lo will be
displayed in the window (8). To leave continuous operation, press the Up arrow
or press the Settings key to change the control panel setting.
Cycle Timer (10)
In this setting, the unit will run for either 3, 6, or 12 hours, then shut off
for 3, 6, or 12 hours. Cycle time can be adjusted by pressing the Up or Down
arrow keys (4/5) repeatedly to set operating time for 3, 6, or 12 hours. The
cycle timer function will continue until you change the setting or turn the
unit off.
Delay Start (11)
Unit can be programmed to turn on at a desired delay time by pressing the Up
or Down arrow keys (4.5). Time can be adjusted in 1 hour increments ranging
from 1 to !2 hours. Delay time will be shown in window (8) and will count down
to start time in 1 hour increments.
FAN SPEED (3)
Press Fan Speed to toggle between Low and High fan speeds. Speed will be shown
in
FAN SPEED INDICATOR (6).
BUCKET FULL iNDICATOR (7).
When the collection bucket is full, BUCKET FULL indicator(7) will come on. The
dehumidifier will not run until the bucket is empty.
IMPORTANT:
When the unit is turned off and re-started, it will resume operation in the
same mode it was in. If there is a power failure, when the power returns the
unit will be set to 50% humidity and Fan Speed Low
CONTROL PANEL 55550/55570
POWER ON/OFF (1)
Pressing Power button once turns the dehumidifier “ON” and pressing it again
turnsthe dehumidifier “OFF.”
Settings (2)
Press this key to cycle through the control panel settings from Auto to
Humidity to Cycle Timer to Delay Start. The indicatorlights will show which
setting you are in.
Auto (9)
The first time the unit is turned on, the control panel will default to the
Auto setting. The next time it is turned on, the control panel will default to
the last mode the unit was in before turning off. You may also use the
Settings key to enter the Auto setting. AUTO (9) and “50%” humidity value will
be displayed in window (8). In this setting, the Relative Humidity (RH) is
automatically set to 50%. Because lower temperatures usually correlate with
lower humidity levels, the unit will not run frequently. At higher
temperatures higher humidity is normal so the unit will run more often.
Humidity (9)
In this setting you can manually select the desired humidity level by pressing
the Up or Down arrow keys (4/5). Humidity values are changed in 5% increments
ranging from 35% to 70%. The humidity setting is shown in the display window
(8). Pressing the Down arrow key when the displayed value is 35% will cause
the unit to operate continuously. In continuous operation, Lo will be
displayed in the window (8). To leave continuous operation, press the Up arrow
or press the Settings key to change the control panel setting.
Cycle Timer (10)
In this setting, the unit will run for either 3, 6, or 12 hours, then shut off
for 3, 6, or 12 hours. Cycle time can be adjusted by pushing the timer arrow
up or down (4/5) repeatedly to set operating time for 3, 6, or 12 hours. The
cycle timer function will continue until you change the setting or turn the
unit off.
Delay Start (11)
Unit can be programmed to turn on at a desired delay time by pressing the Up
or Down arrow keys (4.5). Time can be adjusted in 1 hour increments ranging
from 1 to 12 hours. Delay time will be shown in window (8) and will count down
to start time in 1 hour increments.
FAN SPEED (3)
Press Fan Speed to toggle between Auto, Low, and High fan speeds. Speed will
be shown in FAN SPEED INDICATOR (6). When AUTO is selected, the unit will
adjust the fan speed accordingly depending on the humidity level.
BUCKET FULL INDICATOR (7)
When the collection bucket is full, BUCKET FULL indicator (7) will come on.
The dehumidifier will not run until the bucket is empty.
IMPORTANT:
When the unit is turned off and re=started, it will resume operation in the
same mode it was in. If there is a power failure, when the power returns the
unit will be set to AUTO mode.
WATER DISPOSING OPTIONS
OPTION1.EMPTYINGMANUALLY
- Pull out the bucket, grasping side handles.
- Carry the bucket by grasping the inside handle of the bucket.
- After emptying the bucket, replace the bucket in the dehumidifier.
NOTE: Dehumidifier will not work when the BUCKET FULL light is on or without the bucket properly placed in the unit.
OPTION 2, GRAVITY DRAIN HOSE (Hose Not Provided)
-
Take off GRAVITY DRAIN cap. (Fig.l )
-
Assemble the DRAIN CONNECTOR to the dehumidifier by turning clockwise. (Fig.2)
-
Next, screw a standard drain hose to drain connector by turning clockwise. **(Fig.3)
**
CARE AND MAINTENANCE
WRNING
- Disconnect power supply cord from receptacle before performing any maintenance.
CLEANING FRONT GRILL AND AIR FILTER
-
Remove the bucket from unit. Air filter is located behind front grill. ( Fig.l)
-
Pull the filter down and away from unit until it is all the way out. (Fig.2)
-
Wash filter with mild detergent. Rinse thoroughly. Air dry away from direct sunlight. (Fig.3)
-
Front grill can be cleaned using a vacuum cleaner or a soft brush to remove dust . (Fig.4)
-
After cleaning, assemble the air filter to front grill. **(Fig.5)
**
CLEANING THE EXTERIOR
Clean the exterior using a soft brush or dry towel. But do not spray water
directly on the exterior.
CLEANING THE BUCKET
Remove the bucket from the unit. Lift off bucket cover. (Fig.l)
Clean the inside of bucket as needed. (Fig.2)
After cleaning, replace the bucket cover and slide the bucket into the unit. (Fig.3 )
Check the float switch to make sure it is not obstructed. Proper position of the bucket and the float switch is required for the dehumidifier to turn on.
TROUBLESHOOTING
Before calling for service,try he suggestions below to seew he the ry oucan solve your problem with out out side help.
Dehumidifier does not week when pressing the POWER ONbutton.| Is the pose
cord ;lugged Into a grounded 3-prong outlet? Is BUCKET FLU- fight
an?Does BUCKET FULL rot appear after emptying the water bucket?| Plug the
power cord securely wo a gramded 3-prong cede!.Empty the water bucket and re-
hstallCheck the float switch to make sure it e free and nog obstructed.
---|---|---
Dehumidifier is operating. but the unit is not &smog any wake| Is the
compressor running as well as the fan?| The unit may be in the defrostmode.
The fan is running but not the compressor. The unit wit return to
dehunklification autornaecally.II both compressor and fan are nming, but the
air $scharged from the dehumidifier Is not at least 13 degrees above the room
temperature. then there may be a scaled system failure. Service is _trn_
required.
Loud noise end/ or woratron during operation.| Is the unit on a level
surface?| Move the unit to a level surface.
Sounds.| Sands like fbwing water during and alter operation.II makes a pinging
sound.| TMs Is the normal sound of the refrigerant flowing through the
COILNormal sound of expansion and contraction caused by temperature changes.
Dehumidifier is not running &Openly| Are the filer and gra dirty?Is indoor
temperature under 65’F?| Clean the FRONT GRILL and AIR FILTER.PAhough the unit
wil delowniolfy at temperatures below 65 degrees. there is a potenbal for
frost to develop which may Inhisil the units efficiency
Unit Is 63i:hanging warm air.| | Wong: Compressor and electric motor
discharge a smal amount of heat.
Water does not drain through hose.| Check the DRAIN CONNEC-
TOR. ISI it Installed correctly?Check the drain hose for kinks or
obstructions.| Re-Install drain hose according to this manuaLFlatten the hose
or remove block-age.
PRODUCT SPECIFICATION
Classification | Specification | Remark |
---|---|---|
Model | 55630 | 55550 |
Power Supply | AC 115W60Hz | AC 1151.1160Hz |
Power Rcquroments | 44A 505W | 5.2 A. 598 W |
Mosture Removal | 30 Ant | |
(142Iters) | 50 Frit | |
(23.61ilen) | 70 Pint | |
(13.1Iters) | 24-Hour Period | |
Control Type | Electronic | Electronic |
Refrigerant | R-410a | |
8.46 0742409) | R-410e | |
102302(290g) | R-410a | |
119004340g) | ||
Hurridily Seeing | LO. 35-70% | LO. 35-70% |
Cycle Timer | 3. 6.12 MISS | 3. 6, 12 lbws |
Delay Time | 1-12 Hours | 1-12 Hours |
Fan Moor Modes | High, Low | AIXHigh. Low |
Operating Temp. | 36,-99, | 36T-9511F |
Dimensions | 13.0X20.8X95 in | 14.6%23.0(Xt2-5in |
330X528X241 mm | 370)385%318 mm | 370=5%318 wen |
Nei WeigM | 30.53 be | |
(1385149) | 40.30 be | |
(18.2841) | 43.634e | |
(19.791(0) | ||
Bucket Capaoty | 10.5 Pint | |
(5.01itens) | 19.2 Pint | |
(9.11iters) | 192 Pint | |
(9.1Inois) |
References
- Best Appliances for Home, Kitchen, Laundry, & Cooking | Kenmore
- Warranty Information | Kenmore
- Manual-Hub.com – Free PDF manuals!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>