Garfeur GF-PS001 Automatic Cat Food Dispenser User Guide
- June 17, 2024
- Garfeur
Table of Contents
Garfeur GF-PS001 Automatic Cat Food Dispenser
Assembling Your Pet Feeder
- Press lock buckle to open lid. Take out all accessories and remove all packing materials.
- Plug in DC cable. Install 3 D batteries (not included) for back-up power in case of a power outage.
- Align notches and snap splitter into the left bowl holder.
- Align notches and snap the right holder into the left one.
- Place bowls in bowl holders. Lift feeder and attach bowls to the notch underneath the base.
- Take desiccant bag out from packaging, open desiccant box and place it in. Put the lid back on.
Care and Cleaning
- Lift feeder and remove bowls and holders.
- Rinse clean and air dry thoroughly.
- In the unlocked status, hold Δ and ∇ simultaneously for 3s until a beep is heard to unlock food slider.
- Press lock buckle to open lid. Take out desiccant bag.
- No internet connection, or can not reach OCR server
- Rotate four lock latches to unlocked position, then take out food slider.
- Rinse clean lid, tank, tank base and food slider. Dry thoroughly.
- Wipe base with a soft and damp cloth. Do not rinse or immerse in water.
- Hold food slider and place it back to base. Rotate lock latches to lock the slider in place.
- Align grooves on both sides and install tank base, tank and lid back.
Questions or Concerns?
support@garfeur.com
www.garfeur.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>