CCLIFE VALUE PLUS CC2504 500ccm Fettpresse Instruction Manual

CCLIFE VALUE PLUS CC2504 500ccm Fettpresse

Product Information

Specifications

• Model: CC2504
• Capacity: 500ccm
• Suitable for: 400g cartridges (220 mm) or loose grease
• Includes: Nozzle tube, mouth-piece
• Optional: Can be equipped with a reinforced hose

Product Usage Instructions

Loose Grease Filling

1. Unscrew the chamber from the head part.
2. Dip the chamber into the grease. Pull back the piston against the spring mechanism while pressing the chamber deeper into the grease. Filling is complete when the piston reaches the stop.
3. Clean off any excess grease from the chamber.
4. Reassemble the chamber with the grease in it with the head part.
5. Press the release tap to allow the spring mechanism to push the piston forward.
6. Actuate the pump lever multiple times to expel trapped air out of the nozzle tube connection.
7. Screw on the nozzle tube and mouthpiece.

Cartridge Filling

1. Unscrew the chamber from the head part.
2. Pull back the piston against the spring mechanism. Insert the cartridge into the chamber.
3. Reassemble the chamber with the cartridge in it with the head part.
4. Press the release tap to allow the spring mechanism to push the piston forward.
5. Actuate the pump lever multiple times to expel trapped air out of the nozzle tube connection.
6. Screw on the nozzle tube and mouthpiece.

GENERAL INFORMATION

• This one-hand grease gun is suited to be filled with 400g cartridges (220 mm) or loose grease.
• The grease gun is supplied with nozzle tube and mouth-piece. The grease gun, as an option, can also be equipped with a reinforced hose .

SAFETY INFORMATION

Please note the following safety notes to avoid malfunctions, damage or physical injury:

• This manual belongs to the product. It contains important notes on operating the unit. Please pass it on along with the unit if it is handed over to a third party!
• Dispose of the packaging materials carefully; the plastic bags may become a deadly toy for children.
• Make sure that all parts are firmly assembled before you use the grease gun.
• Do not use force when operating the pump lever.
• Only use the supplied original accessory.
• Exchange damaged accessory immediately.
• Do not disassemble the unit or attempt to repair it yourself. It does not contain parts serviceable by you.

MAINTENANCE AND CLEANING

• Do not clean the grease gun with aggressive detergents or aggressive chemicals.
• The grease gun is low maintenance unit in general. Because of the operator obligations have to be regularly checked parts like head unit, screw joints, lever, hoses, nozzle, etc to avoid environmental or property damage and to avoid persons being hurt.

LOOSE GREASE FILLING

1. Unscrew the chamber from the head part.
2. Dip the chamber into the grease.
   • Pull back the piston against the spring mechanism while pressing the chamber deeper into the grease.
   • Filling will be completed as soon as the piston has been pulled back all the way to the stop.
   • Pull the chamber out of the grease and clean off any grease sticking to its outside.
3. Reassemble the chamber with the grease in it with the head part.
4. Press the release tap.
   • The spring mechanism will push the piston forward.
   • Actuate the pump lever a few times in order to press the air trapped inside the grease gun out of the nozzle tube connection.
   • Screw the nozzle tube and mouthpiece to the grease gun.

CARTRIDGE FILLING

1. Unscrew the chamber from the head part.
2. Pull back the piston against the spring mechanism. Insert the cartridge into the chamber.
3. Reassemble the chamber with the cartridge in it with the head
4. Press the release tap.
   The spring mechanism will push the piston forward. Actuate the pump lever a few times in order to press the air trapped inside the grease gun out of the nozzle tube connection. Screw the nozzle tube and mouthpiece to the grease gun.

FAQ

Q: Can I use other types of cartridges with this grease gun?
A: The grease gun is designed to be used with 400g cartridges (220 mm) or loose grease. It is recommended to stick to these specifications for optimal performance.

Q: How often should I perform maintenance on the grease gun?
A: The grease gun is a low maintenance unit, but it is important to regularly check parts like the head unit, screw joints, lever, hoses, and nozzle to prevent malfunctions and ensure safety. Cleaning should be done without aggressive detergents or chemicals.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>