OLIGHT PL-3S Valkyrie Rail Mount Light User Manual
- June 17, 2024
- OLIGHT
Table of Contents
OLIGHT PL-3S Valkyrie Rail Mount Light
Product Information
Specifications
- COOL WHITE CCT: 5700K CRI: 70
- Max Output: 1,000 lumens
- Working temperature: IPX6
- Beam Distance: 200m
- Impact Resistance: 1m
- Dimensions: (L)81(W)36.6(H)32.5mm
- Power Source: 2*CR123A 1600mAh 3V batteries
- Weight: 119g/4.20oz (Including Batteries)
Product Usage Instructions
- Open the Tail Cap: Follow Figure 1 to open the tail cap.
- Remove the Insulating Film: Before use, remove the insulating film as shown in Figure 2.
- Adjust Installation Position: Use Figure 3-2 to adjust the installation position of the light.
- Turn the Light On/Off: Press and hold or use momentary on as shown in Figure 4.
- Change Brightness Level: Double press for high brightness level as shown in Figure 6.
- Direct Access to High Brightness: Use Figure 7 for direct access to high brightness.
- Strobe Mode: Activate strobe mode by pressing both buttons simultaneously as shown in Figure 8.
FAQ
-
Q: What is the working temperature range of the PL-3S Valkyrie?
A: The PL-3S Valkyrie is rated IPX6 and can operate within a working temperature range specified by the manufacturer. -
Q: How do I change the brightness level of the light?
A: To change the brightness level, double press the button for high brightness or refer to the user manual for more details. -
Q: What type of batteries does the PL-3S Valkyrie use?
A: The PL-3S Valkyrie uses two CR123A 1600mAh 3V batteries for power.
IN THE BOX
-
PL-3S Valkyrie
-
1913 Adapter and Screw
-
H2.5/H1.5 Wrench
Product Specifications
COOL WHITE CCT: 5700K CRI: 70
- Above data are tested per ANSI/PLATO FL 1-2019 standard in Olight’s labs for reference.
Multi-language dictionary, see Table 2
Operating instructions as below
Open the tail cap
Remove the insulating film
Screw off
Adjust the installation position of the light
Screw on
Turn the light on/off
Quickly single press (press and then release) either button to turn the light on. Press either button again to turn off.
Momentary on
Press and hold either button to maintain momentary on. Release the button to turn off.
Change brightness level
When the light is on, double press either button to switch between High and Low output.
Direct access to high brightness
When the light is off, double press either button to access High output.
Strobe
Press both buttons simultaneously to turn on Strobe. Strobe will continue when the buttons are released. Press either button to turn off.
Battery installation
Close the tail cap
WARRANTY
Within 30 days of purchase: Contact the original seller for repair or
replacement. Within 5 years of purchase: Contact Olight for repair or
replacement. This warranty does not cover normal wear and tear, modifications,
misuse, disintegrations, negligence, accidents, improper maintenance, or
repair by anyone other than an authorized retailer or Olight itself.
USA Customer Support
cs@olightstore.com
Global Customer Support
contact@olightworld.com
Visit www.olightworld.com to see our complete
product line of portable illumination tools. Dongguan Olight E-Commerce
Technology Co., Ltd 4th Floor, Building 4, Kegu Industrial Park, No 6 Zhongnan
Road, Changan Town, Dongguan City, Guangdong, China.
Made in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>