Redangli AL-001 Stage Party Light User Manual

Redangli AL-001 Stage Party Light

Thank You!

Thanks for buying our party light, before using it , please read this instruction carefully , thank you ！

Assembly procedure

Party light instruction

• ON/OFF: Power ON/OFF
• DC5V/2A: Power input
• IR: Infrared receiver
• MIC: Mic input (for sound activated)
• MODE: Mode switch. The default mode is on M2 ,Press MODE key, it switch to M3, Keep press it , then switch to 1,2…9 ,then to AUTO,M1, finally back to M2.
  For the detailed functions ,please refer to the remote instruction part.

Product Parameters

• Green laser light source: 532nM,
• Power rate: 50mW
• Red laser light source: 650nM,
• Power rate: 200mW
• LED power rate: 3W *2pcs Total Power rate:10W
• Power input: DC 5V/2A
• Control mode: Remote /Manual
• Dimension: 5.94.33.5 inch
• N.W: 11 oz
• Operating temperature: 10-30℃ / 50-86 °F

Remote instruction

Tips: Before using the remote , please take out the insulation spacer from the remote.

ON Power ON
OFF Power OFF
Auto Auto mode-LED colors and and laser lights exchange automatically.

1. Red LED+lasers
2. Blue LED+lasers
3. Green LED+lasers
4. Yellow LED+lasers
5. Cyan LED+lasers
6. Pink LED+lasers
7. LED OFF,red and green lasers ON
8. LED OFF,only red laser ON.
9. LED OFF,only green laser ON.

M1 Sound activated 1-All lights OFF if no sounds,it sharp-flash to the beats to your dj music.
M2 Sound activated 2-Default mode,It’s AUTO mode if no sound ,If have music,the lights and patterns exchanges to the beats to your music .
M3 Sound activated 3-It’s AUTO mode if no sound ,If have music,the lights and patterns flash quickly to the beats to your music .
G Turn OFF /ON the green laser light in any mode.
R Turn OFF /ON the red laser light in any mode.
FLASH Strobe mode -It flash quickly without music.
Remote battery: Lithium Cell CR2025 -3V

Q&A

Q1 .How to use the remote?

A: Before using the remote, please take out the insu lation spacer from the remote. Please press the remote wowards to the IR hole and stay in the distance in 18 ft.Try to press OFF when the party light is turned on , if the lights turned off then the remote is worked well .Pree ON to turn on the light.

Q2.How to let it be sound activated?

A: The default mode is M2, Please refer to the remote instruction ,press M1 or M3 to choose the sound activated effects .

Q3:The sound activated works not good .

A: Make sure you pressed M1 .M2 or M3 mode, please let the party light close to your speaker (the speaker should be a karaoke speaker),our louder your speaker. M1 or M3 are better for sound activated .

Q4: How to let it be strobe without music ?

A: Press FLASH , the lights flash quickly without music automatically .

QS: Can it be took outside ?

A: Yes, It can be took outside and powered by any SV USB power supply with SV /2A port ,Like power bank, usb charger, car charger, ect.

Q6: How to mount it?

A: It can be put on desk, also can be ceiling mounted or wall mounted.
The lights wowards to any position you want to illuminate.

Safe tips

This party light is 3R product, should avoid the eyes look directly to the laser irradiation,otherwise,it may case your eyes discomfort. Do not let children to operate this product alone.This light is suit for indoor use, use it in dry condition.Please avoid using it in humid,overheated and dusty environment.
This product is powered by DC SV /2A power adapter, do not use any other power supply which voltage is over DC SV.

Warranty and after sales service

Warranty time: 2 years

If you have any other questions about this party laser light,Please contact our support team via email to redangli@outlook.com

Thank you

Documents / Resources

| Redangli AL-001 Stage Party Light [pdf] User Manual
AL-001 Stage Party Light, AL-001, Stage Party Light, Party Light, Light
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>