Puig SUZUKI DL 1050 V-STROM Engine Guard Instruction Manual
- June 4, 2024
- Puig
Table of Contents
SUZUKI DL 1050 V-STROM Engine Guard
Instruction Manual
https://qrgo.page.link/adLuF
INSTRUCTIONS TO ASSEMBLE
You should first mount one side of the engine guard and then the other,
otherwise, the engine will be unsupported. All the screws replaced, should be
tightened to the torque specified in the OEM maintenance manual for your
motorcycle. If no torque specifications are provided in the OEM maintenance
manual, may be used 54Nm for all M10 screws and 22Nm for the M8 screw.
Medium-strength liquid thread-locker (i.e., “Loctite”) should be used to
secure all screws, bolts, and nuts.
All screws, bolts, and nuts should be checked after driving the first 50 km to
ensure that all are tightened to the proper torque.
TO ASSEMBLE THE CRASH PADS, IF YOU ARE NOT A TRAINED MECHANIC, PLEASE CONTACT
A SPECIALIST. MOTOPLASTIC, S.A. TAKES NO RESPONSIBILITY FOR DAMAGES CAUSED BY
IMPROPER INSTALLATION. THE USE OF CRASH PADS DOES NOT GUARANTEE A FULL
PROTECTION IN CASE OF AN ACCIDENT. MOTOPLASTIC-PUIG DECLINES ANY
RESPONSIBILITY IN CASE OF MOTORCYCLE DAMAGE.
The accessory was verified in the basic configuration of the motorcycle. For
models with extra factory settings. We cannot assure its compatibility, except
for prior consultation. We decline any eventual claim.
| DESCRIPTION | QTY. | REF.: |
|---|---|---|
| Protector right side | 1 | DEFENSA-20404N |
| Protector left side | 1 | DEFENSA-20404N |
| Central pipe | 1 | DEFENSA-20404N |
| M8x35 DIN912 black allen screw | 2 | TORNI-AD912-196 |
| M8 DIN125/A back washer | 4 | ARANDPD125-018 |
| M8 DIN6923 black nut | 2 | TUERCEG6923-249 |
| M10/125×80 DIN912 allen screw (Right) | 1 | TORNIAD912-0338 |
| M10/125×100 DIN912 allen screw (Left) | 1 | TORNIAD912-0329 |
| Ø22.5 x Ø10.5 long.17mm spacer (Right) | 1 | CASQU487-0-1787 |
| Ø22.5 x Ø10.5 long.20mm spacer (Left) | 1 | CASQU488-0-1788 |
| M10 DIN125/A black washer | 2 | M2AM10DIN125AZB |
| Round tip 16-25 | 2 | CONTERA—-5983 |
| M12/175 bar Long. 388mm | 1 | VARILL19-0-1452 |
| Ø28 x Ø12.5 long.35mm spacer (Right) | 1 | CASQU489-0-1789 |
| Ø28 x Ø12.5 long.22mm spacer (Left) | 1 | CASQU490-0-1790 |
| M12 DIN125/A washer | 2 | ARANM12DIN433ZB |
| M12 DIN985 locknut | 2 | M2TUM12DIN985ZB |
| M12 plastic cap for hex. screw | 2 | ISC00300700106N |
MOUNTING INSTRUCTIONS
- ASSEMBLY RIGHT SIDE
- ASSEMBLY LEFT SIDE
Created by: www.rrdisseny.cat
www.puig.tv
www.puigusa.com
info@puig.tv
info@puigusa.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>