EMPIRE OFFROAD 4 Inch Krypton Fog Light Instruction Manual
- June 17, 2024
- EMPIRE OFFROAD
Table of Contents
4” KRYPTON FOG
Installation Instructions
!!! Disconnect battery before attempting any electrical work or
installation!!
Installation Guide:
- Disconnect battery.
- Remove old fog lights. Process varies by model so search online for a video for your particular year and bumper design.
- Inspect vehicle wiring harness and connectors for any damage. Repair if needed.
- Note which style mounting bracket your old fogs use. The standard is 4tab which is included. Some use 3 tab designs and some use 2 tab designs. Those brackets are available for purchase online.
- Clip off the fog connector from the jeep and attach the new connector unless you purchased the adapter cable. Red is positive and black is negative.
- Wire the yellow wire (White accent) to either the 12V+ marker lights or a switch of your choice.
- Install the new fogs into the bumper and connect the power connector.
- Reconnect battery and enjoy your new fogs!
RED – FOG POSiTiVE
BLACK – FOG NEGATiVE
YELLOW – ACCENT
4 TAB
INCLUDED|
---|---
3 TAB
PURCHASED SEPARATELY|
2 TAB
PURCHASED SEPARATELY|
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>