SLOPEHILL Hyper BLDC Hair Dryer User Manual

Hyper BLDC
User Manual
Product Warranty
Hair Dryer
for Professionals

Before using Slopehill – HBLDC

• Do NOT use the dryer in wet conditions or with wet hands; Do NOT immerse the appliance in water or other liquids.

• Do NOT use a hair dryer near a bathtubs or other containers with water.

• After using the dryer, please pull out the plug.

• Please be extra careful to hold the dryer when using it.Damaging the dryer by dropping it may result in major malfunction.

• The appliance and its power cord must be kept away from the surface of heat-sensitive objects (eg plastic explosives, ethanol, etc.).

• The appliance consumes relatively i amount of electrical power (2000W). Be sure to use a 110V outlet and do not use this appliance with any other device plugged in in the same outlet.

• If the power cord shows any signs of damage or wear, it must be fixed or replaced by a professional.

• Do NOT use electrical accessories that have been modified or not approved by the manufacturer.

• The back cover of the electrical appliance can be removed to clean the foreign body. Before cleaning, be sure to disconnect it from the power outlet and let it cool down. Do not use corrosive detergents such as phenol during cleaning.
  This electrical appliance is only used for its special purposes.

• To ensure further safety, it is recommended not to used by persons with physical defects, mental or sensory disorders, or low intelligence / insufficient knowledge of the product unless they are trained and competent, or used safely under supervision to ensure their safety.

• Children should be supervised at all times to ensure that they do not play with electrical devices, which affects their safety.

Parts & Control Switches

1. 1 BLDC Hair dryer
2. 1 Concentrated Nozzle
3. 1 Styling Nozzle
4. 1 Volumizing Diffuser

Different style settings

1. Busy morning, and need quick dry?
2. Forshort hair
3. For long hair and male hair styling
4. Using voluming diffuser

Automatic cleaning & Removing the back cover

Remove 2 parts starting with the ring cover and use the automatic cleaning function by

1. turning off the dryer,
2. press wind speed control button for 3 seconds,
3. the auto cleaning will start operating for 7-8 seconds and will turn off automatically.

• This will clean most of small dust however, if you still see any hairs or other large dust, please get rid of it before putting everything back together.

Specification Warning

Please be extra careful to hold the dryer when using it. Damaging the appliance by dropping It may result in major malfunction. Please be extra careful to hold the dryer when using it. Damaging the appliance by dropping it may result in Major malfunction.

The appliance and its power cord must be kept away from the surface of heat- sensitive objects(such as plastic explosive, ethanol, etc.) and heat sources. The dryer consumes relatively large amount of power (2000W). Make sure you use 110V outlet and do not use this dryer with any other devices plugged in to the same outlet. Do NOT leave the hair dryer on fora long time especially near piceous objects such as blankets or papers.
It may cause a fire. The back cover of the electric appliance can be removed to clean the body. When cleaning, do not use corrosive cleaners such as phenol. This electric appliance is only used for its special purpose.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>