Reflex LED Flash Head Light

“`html

Specifications

• Mounting Options: 1/4-20 Mounting Point, Speedring Mount,
  Umbrella Mount, External Trigger Mounting Point

• Ports: 3.5 mm port, USB-C Port

• Display: OLED Display

• Power Source: Battery Handle with USB-C Port

• Lumen Output: 100-9000 Lumens

• Stops: 1.0-5.0 Stops

• Shutter Speed: 1/160-1/2500 Second

Product Usage Instructions

Section 1: Reflex Light

The Reflex Light features various mounting points for versatile
setup options. Always use a cover or optic to protect the LED.

Section 2: Battery Handle

The Battery Handle includes a USB-C port, power button, and
state of charge indicators. It can be mounted to a light stand or
pole.

Section 3: Connecting Light to Battery

Push the light onto the battery until it clicks. Connect the
USB-C cord to both the light and battery ports.

Section 4: Operation Basics

Connect the USB-C cable, press the power button on the battery
to activate. Check the OLED display for correct connection.

Section 5: OLED Display

The OLED display shows lumen output, power level indicators, and
alerts for overheating or sensor faults.

Section 6: Menu Overview

Use the control dial to navigate the menu, change settings like
power levels, wireless modes, and burst modes.

Section 7: Changing Light Settings

To adjust settings, enter the menu by pressing the control dial.
Rotate the dial to select options like burst mode, group &
channel settings, and link modes.

FAQ

Q: How do I know if the battery is fully charged?

A: The battery indicator LED will turn green when fully
charged.

Q: Can I use the Reflex Light with wireless transmitters?

A: Yes, refer to Section 7 for light settings when using
wireless transmitters.

Q: What should I do if the OLED display shows an overheating

alert?

A: Turn off the light to allow it to cool down before further
operation.

“`

User Manual
stellaprolights.com

Table of Contents
Section 1 Reflex Light
Section 2 Battery Handle
Section 3 Connecting the light to battery handle and powering on
Section4 Operation basics
Section 5 OLED display
Section 6 Menu overview
Section 7 Light settings for operation with wireless transmitters
Section 8 Firmware Updates
Section 9 Notes on use
Section 10 Additional Information

Section 1 REFLEX LIGHT
1/4-20 Mounting Point
Direct mount
Speedring Mount Umbrella Mount
3.5 mm port External Trigger Mounting Point USB-C Port
DIRECT MOUNT

OLED Display
100
Pwr
Control Dial

Medium Spot Flat Port

Optic

Cover*

*Always install a cover or optic over the exposed LED to protect against dust or moisture

Section 2

Lanyard holes

BATTERY HANDLE
USB-C Port Cover

Power Button

Mounting Latch
State of Charge (SOC) LEDs (25%, 50%, 75%, 100%) BATTERY INDICATOR LED to indicate battery state
Charging (Green) Discharging (Red)
Pole Mounting Feature MOUNTING BATTERY HANDLE TO LIGHT STAND
MOUNTING ON POLE Pull on one side to tighten lanyard against a pole Allen bolt secures connection

*Professional Light Stand Sold Separately

Attach a loop to a light stand knob.

Section 3 CONNECTING LIGHT TO BATTERY

Push light onto battery until it “clicks” Tip: Push from the front top of the optic

Connector tab should no longer be compressed

Unlatched

Secured

Connect USB-C cord to Reflex light and battery USB-C ports

Section 4 OPERATION BASICS
Connect short USB-C to the light and battery. Press the white power button on the battery. Battery Indicator will turn red. Check connection and charge if indicator light does not turn red. The OLED display will turn on if connections are ok.
Power Button
USING THE CONTROL DIAL · A Short press (1 sec) switches between
Continuous and Digital Burst (Or advance through menu) · A Medium press (2 sec) enters and exits the the Reflex menu · Long press (4 sec) to enter power off (Unplug when putting in storage or traveling) · Rotate Clockwise to increase output (Or change menu setting) · Rotate Counter-clockwise to decrease output (Or change menu setting) Transmitter is required for wireless burst operation

Section 5 OLED DISPLAY
4000
E Pwr

Lm 100-9000 Lumens 1.0-5.0 Stops Stops*1/160-1/2500 Second
L LED Overheating (Turn off to cool down)
B Battery Overheating (Turn off to cool down)
! Sensor Fault (Return for service)

Section 6 MENU OVERVIEW

To navigate the menu, short press dial to advance the sub-menu. Rotate dial to change the setting.

Power Level Indicators

Continuous/Burst Power
Wireless Modes Godox, Elinchrom, Bluetooth, Profoto, – Radio Off

3.0Stops
E Pwr 2
GR 4 CH 20
Group Channel

Burst Modes
Pwr Control the lumen output with a set POWER burst duration of 5 milliseconds
Control the burst duration with a set lumen output of 18000 lumens
DURATION

Section 7 CHANGING LIGHT SETTINGS
Enter and exit the menu by pressing the control dial for 2 seconds
Menu selection: Short press to advance through sub-menus

mode
Pwr
Pwr

Burst Mode – Rotate dial to select burst mode: Power or Duration

link 2
1 2

Proportional ( )Link – Rotate
dial to cycle through link modes. When active Reflex will strobe n times brighter than current continuous light.

group

Group & Channel – Rotate dial to select group and channel

E (1-4)(1-20) G (A-F)
(1-32) P (AC) (1-8)
rotation

Rotation – Rotate dial to change display orientation (4 directions) for mounting Reflex horizontal or upside down.

Burst Modes

Pwr
POWER

5ms Burst Adjustable Power

Use this mode to:
· Shoot at any shutter speed (including HSS) · Freeze action with the shutter · Maximize the amount of light on subject

DURATION

Adjustable Duration (0.4ms – 6ms) 18000 Lumens

Use this mode to: · Shoot at the camera’s X-Sync shutter
speed or longer (not HSS)
· Freeze action with light
· Best used in low light situations

Link Mode
Only exact at shutter speeds faster than 1/200

1

Burst power matches continuous power

Optimize your settings in constant mode and, with
Link set to 1, Digital Burst will duplicate Continuous
Power level.

2

Burst power delivers one stop more light than set continuous power setting

Preset your camera to anticipate one more stop of light by underexposing one stop of light.

wireless
G
Elinchrom Godox Bluetooth Profoto – wireless off

Wireless – Rotate dial to select transmitter type (Elinchrom, Godox, Profoto, Bluetooth, Wireless OFF)
Set Wireless mode to Bluetooth to perform firmware updates. Make sure you have exited the menu.
(Raven transmitter works on P or G mode)

Section 8 UPDATING REFLEX FIRMWARE
1. Download the StellaPro Imaging Control Application
2. Set Reflex Wireless Mode to Bluetooth 3. Exit Reflex Menu 4. In the app scan for Devices 5. Select a Device to connect 6. Enter Serial Number 7. Select a Device to start update

Section 9 HOW TO USE REFLEX
There are 3 distinct mode; Continuous, Burst, and Continuous interrupted by Burst upon triggering.
1. Continuous
· Rotate dial to desired power output in lumens. · Your trigger may also allow remote adjustment of
continuous power. · Maximum power from the battery handle is
9000 lumens. · Maximum power from a 100W USB-C source is
9000 lumens.
2. Digital Burst
· When set to Pwr, rotate the dial to set burst power. Maximum burst power is 1 stop more light than maximum continuous mode.
· In Duration mode , rotate the dial to set duration from 0.4ms (1/2500 sec) to 6ms (1/160th sec).
3. Continuous light that Bursts upon triggering
· Sync Reflex with trigger (same as Digital Burst Mode) · Set Constant light (using dial or trigger) · Set Burst power with trigger. Trigger signal will
cause the light to deliver Burst power. · Set your exposure to -1 when link is set to2. When
shutter opens Reflex will deliver extra stop of light.

Battery Runtime
Continuous Full Power: 40 minutes Low Power: 2000 minutes
Digital Burst
18,000 full power Digital Bursts Charge Time: 1.25 hours With a minimum 60W USB-C Charger
(Chargers with lower wattage will charge with variable charge times)
Reflex Battery Handle 100W Continuous: 100-9000 lumens Digital Burst: 1125-18000 lumens
External USB-C PD 100W Continuous: 100-9000 lumens Digital Burst: 1125-18000 lumens
Not Included
For Travel Unplug battery from light. Have at least 30% charge when putting Battery in storage.
Fully charge battery before first use
Charge your battery before first use. Periodically, check the charge of the battery during storage. Fully charge your battery before use. The battery has internal protections that ensure the battery is safely maintained regardless of charge state.
Temperature Warning:
While in full power continuous mode use the battery may get noticeably warm. This is normal. Should the temperature increase beyond safe levels the overheat symbol will appear and operation will pause until battery cools down.

Direct Mount Accessories
Spot Optic 12º Medium Optic 24º Medium Wide Optic 36º Wide Optic 56º Flat Port Cover Dome Diffuser 50º Optic
Speedring Adapters Chimera Speedring Profoto

800-0372 800-0373 800-0406 800-0408 800-0340 800-0335 800-0337
800-0382 800-0400

Mounts Reflex 4S YS Mount Kit Bar Mount

800-0427 800-0401

Other Accessories
Barn Door/Gel holder 3 CTO Set (Full, 1/2, 1/4)
-82mm Glass RGB Color Set
-82mm Glass Remote Control 1/4-20 Mount Base Receiver Cold Shoe Mount Kit

800-0383 800-0385
800-0410
800-0325 800-0402 800-0403

Power Supplies 100W USB-C AC Power Supply 552-9618

Transmitters Menu options allow you to choose between Elinchrom, Godox and Profoto wireless protocols.
Plug in any 3.5mm receiver to the sync port to operate with external receivers.
OPERATIONS SPECIFICATIONS
Reflex auto fan operation
Integrated variable speed fan automatically turns on when light output exceeds 2900 lumens. Low Speed (3000-7000), High Speed (7100-9000).
Operating from external power
Reflex will deliver 9000 lumens (18,000 lumens in burst) when connected to 100W or greater external power source.

Download StellaPro Imaging Control (iOS & Android)
GET IT ON
Registering for a StellaPro Account Register for a StellaPro account to get access to the latest firmware updates along with tips and tricks from our Ambassadors and community members. Firmware update Please make sure to update your Reflex to the latest firmware to ensure the Reflex is operating to it’s full capabilities. Update performed from the StellaPro Imaging Control app. Warranty StellaPro products are covered against defects in workmanship and materials under normal use and service for 2 years from the date of purchase. Please register your device (Reflex only) to activate warranty coverage. Batteries, by nature of their use, are covered for 1 year. Warranty is non- transferable and does not cover failures from misuse. We will repair or replace, at our discretion, any product that is found to be defective under our warranty policy. Verification of purchase date must be provided with any claim. Storage & Travel Never store the batteries fully discharged as this may cause permanent damage. Unplug from battery when traveling.
Regulatory Information
.
IP65
Light & Motion Industries, 711 Neeson Road, Marina, CA, USA

General Performance with given USB-C Supply Power Rating

USB-C Power Supply 60W

100W

Reflex Lighthead

6,000 Lumens,

9,000 Lumens,

Burst 12,000 Lumens Burst 18,000 Lumens

Reflex 70Wh Battery 1.25Hr charge time 1.25Hr charge time
Find our Recommended Power Supplies at lightandmotion.com/pages/reflex- recommended-power-supplies

Reflex Mounting Options
Reflex 4S YS Mount Kit
800-0427

3.0Stops

3.0 Stops

3.0Stops
1/4″-20 Mounting (Screen Rotated)

Speedring Mount Mount softboxes for Chimera, Profoto, Bowens using a StellaPro Speedring.
Direct Mount Direct Mount modifiers require a press-in and clockwise turn to lock. Always operate the Reflex with a Direct Mount modifier installed.

Reflex Bar (Mount 1 to 5 lights) 800-0401

FlexYourReflex

@stellaprolights
Contact seva@lightandmotion.com for support.
905-0487-A-08

References

• lightandmotion.com/pages/reflex-recommended-power-supplies
• stellaprolights.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>