ID240 Dash Camera

Product Information

Specifications

• Product Name: Dash Cam

• Compliance: Part 15 of FCC Rules

• Radiation Exposure: FCC Radiation exposure limits for
  uncontrolled environment

• Minimum Distance: 20cm between the radiator and body

Product Usage Instructions

Installation

1. Find a suitable location in your vehicle to mount the dash
cam.

2. Ensure the minimum distance of 20cm between the radiator of
the dash cam and your body is maintained.

3. Use the provided mounting accessories to securely attach the
dash cam to the chosen location.

Operation

1. Power on the dash cam by connecting it to a power source,
typically the vehicle’s cigarette lighter socket.

2. Adjust the angle of the dash cam lens to ensure proper
recording coverage.

3. Start recording by pressing the designated button or
following the on-screen instructions.

Maintenance

1. Regularly clean the lens of the dash cam to ensure clear
recording quality.

2. Check the mounting position periodically to prevent any
dislodging or movement.

3. Keep the dash cam firmware updated for optimal
performance.

FAQ

Q: Can I use the dash cam in extreme temperatures?

A: The dash cam is designed to operate within a specific
temperature range. Avoid exposing it to extreme heat or cold beyond
its specified limits.

Q: How do I access the recorded footage?

A: Connect the dash cam to a computer using the provided USB
cable or remove the memory card and insert it into a card reader to
view the recorded videos.

DASH CAM
User Manual

FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement: The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>