behringer B115D 2-Way Active PA Speaker User Guide

: June 4, 2024
: Behringer

Table of Contents

behringer B115D 2-Way Active PA Speaker
Important Safety Instructions
LEGAL DISCLAIMER
LIMITED WARRANTY
Controls
Specifications
Important information
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
Important information:
References
- Related Manuals / Resources
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

behringer B115D 2-Way Active PA Speaker

Important Safety Instructions

Terminals marked with this symbol carry an electrical current of suﬃcient magnitude to constitute a risk of electric shock. Use only high-quality professional speaker cables with ¼” TS or twist-locking plugs pre-installed. All other installation or modiﬁcations should be performed only by qualified personnel.

This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure voltage that may be sufficient to constitute a risk of shock.

Caution
To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user-serviceable parts inside. Refer servicing to qualified personnel.

Caution
To reduce the risk of ﬁre or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.

Caution
These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Use only attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table speciﬁed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shallremain readily operable.
Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE
Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the eﬃcient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city oﬃce or your household waste collection service.
Do not install in a confined space, such as a bookcase or similar unit.
Do not place naked flame sources, such as lighted candles, on the apparatus.
Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed of at a battery collection point.
Use this apparatus in tropical and/or moderate climates.

LEGAL DISCLAIMER

Music Tribe accepts no liability for any loss which may be suﬀered by any person who relies either wholly on or in part upon any description, photograph, or statement contained herein. Technical speciﬁcations, appearances, and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Auratone, and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2020 All rights reserved.

LIMITED WARRANTY

For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at musictribe.com/warranty. PK108/110/112/115 Controls

Controls

INPUT – Use speaker cables with speak ON-style twist-locking professional connectors to connect the speaker to the power ampliﬁer. Insert the twist-locking connector into the jack and rotate clockwise until the connector locks into place. These speakers connect to power via pins 1+ and 1- in the twist-locking connector. Pins 2+ and 2- are not connected internally to the speakers but are wired through to the LINK OUTPUT.
LINK OUTPUT – Use this connection to feed the INPUT signal on pins 1+ and 1- through and out in order to power an additional speaker with the same signal. Alternately, by running a 4-pole speaker from the power amp to the INPUT jack, an additional power amp channel on pins 2+ and 2- can be fed straight through to the LINK OUTPUT to feed an additional speaker with a separate signal. This alternate method can be useful for consolidating your speaker cables when necessary. Check to make sure your power amplifier can combine and send out all pins (1+, 1-, 2+ and 2-) from a single output jack.
SYSTEM SPECIFICATION – Refer to this section of the back panel to find the power rating for your specific speaker model

behringer-B115- 2-Way-Active-PA-Speaker-05

Specifications

System Data PK108 PK110 PK112 PK115
Peak power 320 W 480 W 600 W 800 W
Impedance 8 Ω 8 Ω 8 Ω 8 Ω
Type 2-way 2-way 2-way 2-way
Frequency response
87 Hz to 35 kHz (±3 dB) 20 Hz to 20 kHz (-10 dB)
80 Hz to 35 kHz (±3 dB) 20 Hz to 20 kHz (-10 dB)
75 Hz to 35 kHz (±3 dB) 20 Hz to 20 kHz (-10 dB)
70 Hz to 35 kHz (±3 dB) 20 Hz to 20 kHz (-10 dB)
Sound pressure level (SPL)
96 dB (full space, 1 W @ 1 m)
96 dB (full space, 1 W @ 1 m)
96 dB (full space, 1 W @ 1 m)
96 dB (full space, 1 W @ 1 m)
Nominal dispersion 70° H x 50° W 70° H x 50° W 70° H x 50° W 70° H x 50° W
Crossover frequency 2.2 kHz 2.2 kHz 2.2 kHz 2.2 kHz
Rigging fittings Ergonomically shaped
handle 35 mm pole socket
Ergonomically shaped
handle 35 mm pole socket
Ergonomically shaped
handle 35 mm pole socket
Ergonomically shaped
handle 35 mm pole socket
Components
Tweeter 1″ compression driver 1″ compression driver 1″ compression driver 1″ compression driver
Woofer 8″ (203 mm) 10″ (254 mm) 12″ (305 mm) 15″ (381 mm)
Connectors 2 x Speaker Twist
Connectors 4 pins
2 x Speaker Twist
Connectors 4 pins
2 x Speaker Twist
Connectors 4 pins
2 x Speaker Twist
Connectors 4 pins
Wiring Pins 1+ / 1- input
Pins 2+ / 2- link
Pins 1+ / 1- input
Pins 2+ / 2- link
Pins 1+ / 1- input
Pins 2+ / 2- link
Pins 1+ / 1- input
Pins 2+ / 2- link
Dimensions / Weight
Dimensions (H x W x D) 395 x 254 x 211 mm
(15.6 x 10 x 8.3″)
491 x 315 x 261 mm
(19.3 x 12.4 x 10.3″)
583 x 375 x 308 mm
(23 x 14.8 x 12.1″)
685 x 433 x 366 mm
(27 x 17 x 14.4″)
Weight 5.1 kg (11.2 lbs) 7.2 kg (15.8 lbs) 10.1 kg (22.2 lbs) 14.9 kg (32.8 lbs)

Important information

Register online. Please register your new Music Tribe equipment right after you purchase it by visiting behringer.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.
Malfunction. Should your Music Tribe Authorized Reseller not be located in your vicinity, you may contact the Music Tribe Authorized Fulfiller for your country listed under “Support” at behringer.com. Should your country not be listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at behringer.com. Alternatively, please submit an online warranty claim at behringer.com BEFORE returning the product.
Power Connections. Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for
your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception

FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION

Responsible Party Name: Music Tribe Commercial NV Inc.
Address: 901 Grier Drive Las Vegas, NV 89118 USA
Phone Number: +1 702 800 8290

complies with the FCC rules as mentioned in the following paragraph:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation

Important information:

Changes or modifications to the equipment not expressly approved by Music Tribe can void the user’s authority to use the equipment

References

Behringer | Home

JBL Boombox 2 Speaker User Guide

Trust LARA Wireless Speaker User Guide
Trust LARA Wireless Speaker User Guide Charging Instructions Bluetooth Connection LED Indicator Warning instructions FAQ www.trust.com/22799/faq

Trust URBAN Wireless Speaker User Guide
CHARGING WIRELESS SETUP 1/2 WIRLESS- SETUP 2/2 WIRELESSTROUBLESHOOTING WIRELLESS- PLAY MUSIC WIREKESS PHONECALL OTHER INOUTS FAQ Frequently

BLAUPUNKT Velocity Power Speaker User Guide
BLAUPUNKT Velocity Power Speaker INSTALLATION SPECIFICATION Pair of full- range speaker with fiber glass including mounting
hardware Max. output

Manuals+,

home
privacy

| behringer B115D 2-Way Active PA Speaker [pdf] User Guide
B115D 2-Way Active PA Speaker, B115D, 2-Way Active PA Speaker, Active PA Speaker, PA Speaker, Speaker
---|---