GAMESIR 15 Series G8 Galileo Type C Mobile Gaming Controller User Manual

GAMESIR 15 Series G8 Galileo Type C Mobile Gaming Controller

GAMESIR GALILEO
Type-C Wired Mobile Gaming Controller

https://www.gamesir.hk/pages/manuals-gamesir-g8

PACKAGE CONTENTS

• GameSir-G8 ‘”1
• User Manual *I
• certification *I
• Small Thumbstick *1
• High Thumbstick *1
• Round Thumbstick *1
• Thank You S.. After-sale Service Card*1
• GameSir Sticker*1

REQUIREMENTS

• Android 8.0 or above
• Type-c connection

DEVICE LAYOUT

CONNECT AND POWER ON

Follow these steps to connect your phone to the controller.

• The connection status indicator will be solid white to indicate a successful connection.
• Some Android phones may need to be enabled OTG to power on and use the controller.

STANDBY AND WAKE UP

1. When the controller is turned on with 10 minutes of inactivity, the controller will enter standby mode.
2. When the controller is turned on, hold the Home button tor 5s and the controller will enter standby mode.
3. When the controller is in standby mode, press A/B/X/Y / Home button to wake up the controller.

BACK BUTTONS SETTINGS

1. Set the L4/R4 button value: Hold the M+L4/R4 buttons simultaneously until the Mode/connection Status Indicator blinks white slowly. Then press the button you want to map to L4/R4. When the Mode/connection Status Indicator returns to the initial state. the L4/R4 button value is set.
2. Cancel the L4/R4 button value: Hold the M+L4/R4 buttons simultaneously until the Mode/Connection Status Indicator blinks white slowly. Then press the L4/R4 button. When the Mode/connection Status Indicator returns to the initial state, the L4/R4 button value is canceled. *After I0s of inactivity when setting, the controller will automatically exit the setting mode and the button value will remain the some.

BUTTON COMBINATIONS

STICKS & TRIGGERS CALIBRATION

1. connect your phone to the controller. Hold the View+Menu+Home buttons for 5s until the Connection Status indicator and Mode indicator blink rapidly to indicate calibration mode is entered.
2. In calibration mode, follow below steps to complete calibration;
   • Ensure the triggers and sticks are in their natural position without any contact then press the A button.
   • Rotate the sticks at their maximum angles 3 times and let them return to the initial position naturally.
   • Press the triggers to their maximum travel 3 times and let them return to their initial position naturally.
3. Press the A button to complete and exit the calibration mode.
   • Calibration should be kept at a constant speed and gently operated to avoid errors in the collected data.
   • If the sticks and triggers can be used normally, please do not calibrate.

INTERCHANGE PARTS
The faceplates of the Gamesir G8 are magnetic and swappable. You can interchange the thumbsticks according to your preferences.

CUSTOMIZATION VIA “GAMESIR APP”
*EXCLUSIVE ANDROID SYSTEM SUPPORT)
Download GameSir App at gamesir.hk on phone or scan the QR code here. Use GameSir App for firmware upgrade. button testing, sticks S.. triggers zones adjustment, etc.

PLEASE READ THIS PRECAUTIONS CAREFULLY.

• CONTAINS SMALL PARTS. Keep out of reach of children under the age of 3. Seek immediate medical attention if swallowed or inhaled.
• DO NOT use the product near fire.
• DO NOT expose to direct sunlight or high temperatures.
• DO NOT leave the product in a humid or dusty environment.
• DO NOT impact the product or cause it to fall due to strong impact.
• DO NOT touch USB port directly or it might cause malfunctions.
• DO NOT strongly bend or pull cable parts.
• use a soft, dry cloth while cleaning.
• DO NOT use chemicals such as gasoline or thinner.
• DO NOT disassemble, repair or modify.
• DO NOT use for purposes other than its original purpose. We are NOT responsible for accidents or damage when used for non-original purposes.
• DO NOT look directly at the optical light. It might damage your eyes.
• it you have any quality concerns or suggestions, please contact GameSir or your local distributor.

WASTE ELECTRICAL & ELECTRICAL EQUIPMENT INFORMATION

CORRECT DISPOSAL OF THIS PRODUCT (WASTE ELECTRICAL & ELECTRICAL EQUIPMENT)
Applicable in the European Union and other European countries with separate collection systems. This mark on the product or accompanying documents means that it should not be mixed with general household waste. For proper treatment. recovery and recycling. please take this product to designated collection points where it will be accepted free of charge. Alternatively, in some countries you may be able to return your products to your local retailer upon purchase of an equivalent new product. Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally sate recycling. Business users should contact their supplier for further information. If you do so, you will ensure that your disposed product undergoes the necessary treatment. recovery and recycling, thereby preventing negative potential effects on the environment and human health.

DECLARATION OF CONFORMITY

FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interterence, and
2. This device must accept ar interference received, including interference that may cause undesired operation.

STATEMENT OF COMPLIANCE WITH EU DIRECTIVE
Hereby, Guangzhou Chicken Run Network Technology Co., Ltd. declares that this GameSir G8 Controller is in compliance with Directive 20I4/30/EU S. 2011/65/EU and its amendment (EU) 2015/863.

Just in Game
[ CUSTOMER SERVICE ] www.gamesir.hk/Pages/ask-for- help

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>