CINOTON 160W UFO High Bay Lights User Manual
- June 17, 2024
- CINOTON
Table of Contents
CINOTON 160W UFO High Bay Lights
Product Information
Specifications:
- Model: LED High Bay Light
- Wattage: Max. 160W
- Input Voltage: AC120V 50~60HZ
- Main Materials: Die-casting Aluminum+PC
- CCT(K): 5000K
- Lightning Surge Induction Type: 2KV Switch Control, No Sensor
- Colour: Black
- Product Certification: UL/FCC
- *Size (Dia.H cm):* 2614.7
Product Usage Instructions
Installation of UFO High Bay Light
- Screw the lifting ring into the high bay light fixture and tighten it firmly.
- Hang the fixture into the lifting hook or chain ensuring the safety rope protects it from falling.
Plug Diagram & Instruction
- The length of the plug cable is 5.9ft.
- The input voltage is 120V.
2-Way Connection|
Please plug the US plug directly into the wall outlet to turn on the light.
Wire Connection
- If wiring is needed, cut off the US plug.
- Follow local connection standards and safety measures to wire the product correctly.
Wiring Notes
- Only personnel with professional electric knowledge should perform wiring to avoid electrical shock or fire.
- Ensure power is off before connecting the wiring device.
- Pay attention to color correspondence and avoid incorrect connections.
- Avoid connecting ground wire with other wires and ensure correct pole connections.
- After wiring, ensure the connector is placed inside the lamp body or J-BOX for waterproofing.
Safety Notice
- Wear gloves during installation to avoid injury.
- If smoke or sparks occur from the wire, turn off power immediately and seek assistance.
- Mount the lamp directly below an outlet or junction box.
- Cord should be visible along its entire length and not concealed.
- Turn off power supply switch before maintenance.
After-sale Service
- 45 Days Refund
- 3 Years Quality Warranty
- *724 Hours Customer Service**
Situation without Warranty
If the product is not used according to specified instructions or undergoes
unauthorized maintenance, warranty may be voided.
Frequently Asked Questions (FAQ)
- Q: What should I do if I notice damage to the product upon delivery?
A: Contact the manufacturer promptly for assistance if any damage is observed during shipping.
LED HIGH BAY LIGHT
User Manual
Product Parameters
Mode|
---|---
Wattage| MAX. 160W
Input Voltage| AC120V 50~60HZ
Main Materials| Die-casting Aluminum+PC
CCT(K)| 5000K
Lightning Surge| 2KV
Induction Type| Switch Control, No Sensor
Colour| Black
Product Certification| UL/FCC
Size(Dia.H cm)| 2614.7
Attention
-
Kindly inspect the product for any damages that may have occurred during shipping.
If you notice any damage, please contact the manufacturer promptly for assistance. -
Prior to installation, please carefully review the installation instructions to ensure that all necessary accessories are included. Once you have confirmed that everything is complete proceed with the installation steps as outlined.
-
This product includes a Hook Mount, a US plug with a 5.9ft cable, and a Safety Rope. Please select the most appropriate installation method based on your specific needs.
Plug Diagram &Instruction
- The length of the plug cable is 5.9ft
- The input voltage is 120V
Installation of UFO High Bay Light
- Please screw the lifting ring into the high bay light fixture, then tighten it firmly. (Figure1)
- Please hang the fixture into the lifting hook or chain and the safety rope will protect it from falling. (Figure 2）
2-Way Connection
- US Plug
Please plug it directly into the wall outlets to make it light on. (Figure 1)
Wire Connection
- If you intend to wire the product, please cut off the US plug. (Figure 2)
- When wiring the product, please ensure that you follow the local connection standards and take the necessary protective measures to create a secure joint. (Figure 3)
Wiring Notes
- To avoid the possibility of electrical shock or fire, wire connection is only for personnel with professional electric knowledge should perform the installation.
- Before connecting the wiring device to a power source, ensure that the power is turned off at the fuse or circuit breaker box.
- Confirm that the power supply voltage is correct, and connect the clamp to an AC 120V 60Hz power supply.
- When wiring the product, please pay attention to the corresponding relationship between the colors of the distinguishing lines.
- Do not connect the ground wire with other wires, and ensure that the L-pole and N-pole are not connected together.
- After wiring, please ensure that the connector is placed inside the lamp body or J-BOX to help it waterproof.
Safety Notice
- Please wear gloves to avoid injury before installation.
- If any smoke or sparks occur from the wire, turn off the power immediately and notify relevant personnel.
- The lamp should be mounted directly below an outlet or junction box.
- The cord should be visible over its entire length and should not be concealed.
- Please turn off the power supply switch of the lamp in advance during maintenance.
After-sale Service
Situation without Warranty
- The product is not used in accordance with the instructions specified in the installation instructions or requires unauthorized maintenance.
- Damage caused by accidents, changes, misuse, abuse, and exceeding product costs including expenses incurred by the buyer and others in transporting, repairing, replacing disassembling, or installing the product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>