SISTINE LTA0208 Baby Crib Sleeper Instruction Manual
- June 17, 2024
- SISTINE
Table of Contents
SISTINE LTA0208 Baby Crib Sleeper
Specifications
- Brand: SISTINE
- Product Name: Baby Crib
- Item Number: LTA0208
- Material: Aluminum tube, plastic, polyester
- Suitable Age: 0-3 months
Product Usage Instructions
Part List
- Do not tear the anti-collision cotton
- Upper connecting tube
- Support tube
- Bed crib connecting tube
- Bedside elbow
- Regulator
- Lower connecting tube
- Base
- Base extension tube
Assembly Steps
-
Unfolding the upper connection tube:
Assembling the lower connection tube. -
Unfolding the mesh cover of bed rail: Put the connection tube into the mesh cover of bed rail.
-
Attach the lower and upper connection tubes to the support tube.
-
Tighten the zipper of mesh cover: Wrap the round tube back.
-
Attach the base to the support tube: Attach the foot extension tube to the base.
-
Remove the mattress from the bed: Install the base of the crib on the bed frame.
-
Attach the screws to the extension base:
Tighten the strap at the end, then move mattress back on the bed. -
Turn the Base adjustment switch outward: Raise the height so that the lower connection tube is close to the upper surface of the mattress.
-
Insert the crib rail into the four holes corresponding of the bed rail: Make sure it is locked.
-
Fasten the zipper on the edge of the crib rail cover: Wrap the support tube of the bed rail.
Frequently Asked Questions
Q: How do I clean the baby crib?
A: To clean the baby crib, use a damp cloth with mild soap to wipe down all surfaces. Avoid using harsh chemicals that may damage the materials.
Q: Can I use this baby crib for babies older than 3 months?
A: It is recommended to adhere to the suitable age range specified for safety reasons. For babies older than 3 months, consider transitioning to a suitable crib for their age group.
Q: How should I store the baby crib when not in use?
A: When not in use, disassemble the crib following the instructions in reverse order. Store all parts in a dry and safe place to prevent damage and ensure easy assembly when needed again.
IMPORTANT: KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE!BEFORE USING THE BABY CRIB, PLEASE READ THE MANUAL CAREFULLY. IT WILL HELP YOU TO USE THE BABY CRIB PROPERLY. FAILURE TO FOLLOW THE INSTRUCTION MANUAL MAY AFFECT THE CHILD’S SAFETY.
- Please keep this manual properly for future use.
- To prevent accidents, please read this manual carefully and operate strictly according to it.
- If you do not follow the instructions in this manual, illegal operations may cause safety hazards.
Product Warnings
- Warnings on the product shall address the following:
- Entrapment Hazard-To prevent death from entrapment,bedside sleeper must be properly secured to adult bed using the attachment system.
- There must be no more than ½ in.(13 mm)gap between bedside sleeper and adult bed.
- If gap exceeds½ in.(13 mm)DO NOT use product. Do not fill the gap with pillows,blankets or other items that are suffocation hazards.
- Always read and follow assembly instructions for each product use mode(bedside sleeper,crib,play yard).
- Always use ALLrequired parts for each use mode Check instruction manual for a list of required parts. Periodi- cally check product for loose,dam-aged,or missing parts.
Product Details
- Brand： SISTINE
- Product Name: Baby Crib
- Item number： LTA0208
- Material: aluminum tube, plastic, polyester
- Suitable age： 0-3month
- Company Name： Shanghai Wener Information Technology Co., Ltd
- Company Add： 2rd Floor No. 10 , Lane 255. Xiaotang Road, , Fengxian District, Shanghai Compony Phone：+86 188 1339 9792
- Manufacturer: Zhongshan Junya Children’s Products Co., Ltd.
- Manufacturer Add.: 3rd Floor, No. 6 Bai’an Road, Dongsheng Town, Zhongshan City, Guangdong Province, China
Part List
- Upper connection tube×1
- Crib rail×1
- Base×2
- Base extension tube×2
- Lower connection tube×2
- Game support bar×2
- Strap×1
- Screws and other accessories×1
- Support tube×2
- Mesh cover×1
PRODUCT OVERVIEW
INSTALLATION METHOD
- Unfolding the upper connection tube
- Unfolding the mesh cover of bed rail and put the connection tube into the mesh cover of bed rail
- Attach the lower and the upper connection tubes to the support tube
- Tighten the zipper of mesh cover to wrap the round tube
- Attach the base to the support tube and then attach the foot extension tube to the base
- Remove the mattress from the bed Then install the base of the crib on the bed frame.
- Attach the screws to the extension base and tighten the strap at the end.
then move mattress back on the bed.
- Turn the Base adjustment switch outward to raise the height so that the lower connection tube is close to the upper surface of the mattress.
- Insert the crib rail into the four holes corresponding of the bed rail and make sure it is locked.
- Fasten the zipper on the edge of the crib rail cover and wrap the support tube of the bed rail.
PRODUCT USE
How to put down the guardrail crossbar?
- Move the top crossing tube up and down by pressing the release button on guardrail.
- Place the guard rail to be lowest position, and lower down the crossing tube by pressing the releasing button
How to open the crib rail?
Press the Regulator in the middle of the crib rail, Push it slightly toward
the inside of the rail, and then lift the bottom of the rail with your hands
so that the rail is in the horizontal locking position.
How to close the crib rail?
If the frame is lifted and locked horizontally, press the Regulator and
straighten the railing outward to restore it to a baby crib.
Cleaning and Maintenance
Regularly inspect your product to ensure that locking device (springs and
support tubes) and other components remain in good condition.
Maintain the safety of your products by seeking prompt repair for bent, torn,
worn or broken parts.
Fabric Cover Cleaning
The fabric cover may be spot cleaned using a damp sponge with a mild soap or
detergent.
Allow to dry completely before folding or storing away.
Warning!
- Do not use when the fixed position is not securely connected to the bed/or mattress.
- Please adjust the height of the bed fence column according to the thickness of the mattress to ensure that there is no gap between the king bed mattress and the bed fence, otherwise, there may be a risk of gaps. During the use of the bed fence, avoid leaving infants and children unattended.
- Do not leave anything inside the bed fence that may serve as a footrest or cause breathing or strangulation.
- This product is suitable for infants and children aged 0-6 months. Please read the user manual carefully before use. Failure to follow the instructions for installation and operation may affect the safety of infants and children.
- Before use, it is necessary to carefully inspect all components to ensure that the bed fence is connected, the support is located under the mattress and is secured with straps or screws without gaps. If there is any damage, deformation, or missing parts on the bed fence, please stop using it.
- When using, ensure that all locking devices are in a locked state. This bed fence is not suitable for all beds and cannot be installed on underwater beds or uneven mattresses.
- Please ensure that the bed fence is connected correctly, and the support feet are located under the mattress and secured with screws.
- Please ensure that the bed fence is correctly installed between the mattress and the bed body.
- After installation, please regularly check to ensure proper func-tionality.
- Please ensure that the bed fence is kept at a safe distance from fire sources and power sources.
- To avoid entanglement and room breathing risks, please ensure that the bed fence is kept away from ropes, pendants, and other objects.
- Please carefully read the instructions and strictly follow them when operating. Before using the product, please ensure that the protective fence is properly installed and that all locking devices are in a locked state.
- Additional and replacement parts can only be obtained from the brand.
- If you have any questions during use, please contact us directly.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>