Vetroo M05 Micro ATX Computer PC Case Instruction Manual
- June 17, 2024
- Vetroo
Table of Contents
M05
M-ATX PC CASE
Instruction Manual
Accessories
| Item | Name/ Qty | Used for |
|---|---|---|
| Cable ties x5 | Cable management | |
| Screw M3 28mm x5 | Fan screw | |
| Screw #6-32 6.5mm x3 | Motherboard stud | |
| Screw M3 5mm x18 | Motherboard / SSD | |
| Screw #6-32 6mm x6 | psu / Graphics card | |
| Screw #6-32 5mm x10 | 3.5″ HDD | |
| x1 | Slot cover (Spare part) |
A Disassemble the side panel and the front panel
Please remove the side panel and dust filter
B Install the power supply
Install the power supply with the screws of #6-32 6mm, Please ensure that the
heat dissipation fan in the power module is aligned with the heat dissipation
hole at the bottom of the chassis.
C Install the motherboard
Install the motherboard with the screws of M3 5mm, please make sure the holes
of motherboard is align with the motherboard stud of case
Note: If the motherboard stud of the case drops off, please fix it with
screws of #6-32 6.5mm
D Fan Support:
Top: 3 x 120mm / 2 x 140mm
Rear: 1 x 120mm
PSU compartment: 2 x 120mm (install the fans with the screws of M3 28mm)
Radiator Support:
Top: 240mm
E Install the SSD & HOD
Driver bay(Combo)
2x HDD or SSD+HDD
Baseplate
E Install the Graphics card
I/O Panel
Documents / Resources
|
Vetroo M05 Micro ATX Computer PC
Case
[pdf] Instruction Manual
M05 Micro ATX Computer PC Case, M05, Micro ATX Computer PC Case, ATX Computer
PC Case, Computer PC Case
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>