Vetroo U6 CPU Cooler User Manual
- June 15, 2024
- Vetroo
Table of Contents
Vetroo U6 CPU Cooler User Manual
Part List
A CPU Cooler
B LGA1700 Back plate
C Intel Bracket
D Stand-off
E Washer
F Nut
G Position Screw for 1200/115X(Black)
H Position Screw for 1700 (White)
I Position Screw for 2011
J AMD Bracket
K AMD screw
J Thermal Grease
Intel LGA1700/1200/115X
ackplate and adjust it to the corresponding position according to your
motherboard Install position screws into the Intel bsocket(shown as the
picture), tightening with the washers
Insert the back plate with position screws into the rear of motherboard and
fix it with the stand-off.
Install the Intel bracket on the stand-off of back plate and tighten it with
nuts.
Intel LGA2011
Install the LGA 2011 screws directly on the original CPU bracket of
motherboard.
Install the Intel bracket on the stand-off an tighten it with nuts.
Tear off the film on the base of CPU cooler and apply thermal grease evenly on
the CPU.
Tear off the film on the base of CPU cooler and apply thermal grease evenly on
the CPU.
Install the fan, connect the 5v 3pin fan cable to the RGB LED port of
motherboard, connect the 12v 4pin fan cable to CPU FAN port of motherboard.
AMD AMS5/AMA4/AM3(+)/AM2(+)/FM2(+)/FM1
Remove the AMD bracket on the motherboard and keep the original AMD back plate
on the rear of motherboard.
Install the stand-off on the AMD back plate and tighten it.
Install the AMD bracket on the stand-off and fix it with AMD screws.
Install Fan
Tear off the film on the base of CPU cooler and apply thermal grease evenly on
the CPU.
Tear off the film on the base of CPU cooler and apply thermal grease evenly on
the CPU.
Install the fan, connect the 5v 3pin fan cable to the RGB LED port of
motherboard, connect the 12v 4pin fan cable to CPU FAN port of motherboard.
@vetrooUS
WWw.vetroo.com