YELLOW BLINDS BAFXKT-0VWs Adjustable Panel Track Blinds for Sliding Glass Door User Guide
- June 17, 2024
- YELLOW BLINDS
Table of Contents
YELLOW BLINDS BAFXKT-0VWs Adjustable Panel Track Blinds for Sliding Glass
Door
*Use a metal measuring tape for the most accurate results. Round all measurements to the nearest 1/8 of an inch.
INSIDE MOUNT
CHECK WINDOW FRAME DEPTH
Measure the depth as shown. Inside mounts require a minimum of 2″ unobstructed
depth within your frame for most styles. If your window does not meet
requirements, outside mount is recommended.
CHECK FOR EVENNESS
Measure the diagonals as shown. An uneven window will have measurements that
will differ by 1/2″. If this happens, an outside mount is recommended
MEASURE WIDTH AND HEIGHT OF WINDOW FRAME
- W: Measure your window frame at 3 locations: top, center, and bottom. Use the shortest of your three measurements as the working width.
- H: Measure your window frame at 3 locations: left, center, and right. Use the longest of your three measurements for horizontal blinds & shades and use the shortest for vertical blinds & shades.
OUTSIDE MOUNT
MEASURE EXTERNAL WIDTH AND HEIGHT OF WINDOW FRAME
Measure the outside width and height of the area that you want to cover. In
addition, most styles require an area minumum of 2″ flat surface above your
window or frame for mounting brackets.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>