equip 650182 35 Inch Heavy Duty Dual Monitor Desk Mount Bracket Installation Guide
- June 17, 2024
- equip
Table of Contents
equip 650182 35 Inch Heavy Duty Dual Monitor Desk Mount Bracket
Product Information
Specifications
- Product Name: 17-35 Heavy-Duty Dual Monitor Desk Mount Bracket
- Model Numbers: 650182, 650183
- Installation by Professionals Only
- Weight Capacity: Check surface support for safe weight load
- Safety Precautions: Use appropriate safety devices and tools
Frequently Asked Questions
- Q: Can I install this product myself?
- A: No, this product should only be installed by professionals for safety reasons.
- Q: What should I do if I find missing parts during installation?
- A: Contact your local distributor immediately for replacement parts.
Product Usage Instructions
Pre-Installation Preparation:
- Read the entire installation manual before starting the setup.
- If you have any questions or need clarification on instructions, contact your local distributor for assistance.
Safety Measures:
- Ensure that the mounting surface can securely support the combined weight of the equipment, hardware, and connected components.
- Use the provided mounting screws and DO NOT OVERTIGHTEN them.
Child Safety
- This product contains small objects that could be dangerous if swallowed. Keep these objects out of reach of children.
Parts Verification
IMPORTANT
- Make sure you have received all parts as per the components checklist before installation.
- If there are any missing or defective parts, contact your local distributor for replacements.
Maintenance
- Regularly check that the bracket is securely installed and ensure to use it regularly (at least every three months).
Safety Information
Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.
CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury.
- Mounts must be attached as specified in assembly instructions. Improper installation may result in damage or serious personal injury.
- Safety gear and proper tools must be used. This product should only be installed by professionals.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, telephone your local distributor for a replacement.
MAINTENANCE: Check that the bracket is secure and safe to use at regular intervals (at least every three months).
Information
What In The Box
Installation Instructions
To properly balance the arm with monitor mounted, adjust the spring tension using the supplied Allen Key as follows:
- First, position and firmly hold the arm horizontally as shown. Ask for assistance should you require it.
CAUTION: To avoid damage to monitor or mount, always keep the arm in a horizontal position while making adjustments. Again, ask for assistance if required.
- If the arm drops, turn the adjustment screw counter-clockwise until it stays in a horizontal position.
- If the arm rises, turn the adjustment screw clockwise until it stays in a horizontal position.
CAUTION: DO NOT over tighten the screws.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>