equip 650160 32 Inch Articulating 6 Monitor Desk Mount Bracket Installation Guide

equip 650160 32 Inch Articulating 6 Monitor Desk Mount Bracket Installation Guide

Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.

CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury.

• Mounts must be attached as specified in assembly instructions. Improper installation may result in damage or serious personal injury.
• Safety gear and proper tools must be used. This product should only be installed by professionals. Make sure that the supporting surface wil safely support the combined weight of the equipment and al attached hardware and components.
• Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.
• This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
• This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.

IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, telephone your local
distributor for a replacement

MAINTENANCE: Check that the bracket is secure and safe to use at regular intervals (at least every three months).

Package Content

• A (x1)

• B (x1)

• C (x1)

• D (x1)

• E (x6)

• F (x4)

• G (x4)

• H (x4)

• I (x2)

• J (x6)

• K (x4)

• L (x2)

• M (x1)

• N (x1)

• O (x1)

• P (x2)

• Q (x8)

• R (x1) 4mm

• S (x1) 6mm

• T (x1)

Tools Required

• P-A (x6) M6x10

• P-B (x4) M4x5

• P-C (x2) M8x50

• P-D (x4) D8

• P-E (x2) M8

• P-F (x24) M6x27

• P-G (x3) M6x16

• P-H (x1) M5x16

• P-I (x6) M6x10

• M-A (x4) M4x12

• M-B (x4) M4x16

• M-C (x4) M5x12

• M-D (x4) M5x16

• M-E (x4) D5

• M-F (x4)

Installation Instruction

Attach the sliding parts (H) to both sides of the arm.

Keep the arm parallel to the edge of the table when attaching it to the pole.






Note: If the display does not stop at your desired position, tighten the screws as shown.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>