HORIZON HOBBY 800mm Micro Draco Instruction Manual

: June 17, 2024
: HORIZON HOBBY

Table of Contents

HORIZON HOBBY 800mm Micro Draco
Specifications
Product Information
Recommended Equipment

HORIZON HOBBY 800mm Micro Draco

HORIZON-HOBBY-800mm-Micro-Draco

Specifications

Wingspan: 789 mm
Length: 495 mm
Weight:
- Without battery: 206 g
- With recommended 4S 300 mAh battery: 239 g

Wingspan	789 mm
Length	495 mm
Weight	Without battery: 206 g

With recommended 4S 300 mAh battery: 239 g

Product Information

The Micro DRACO 800mm BNF Basic includes the following elements:

Receiver/ESC: SpektrumTM AS3X/SAFE Receiver/ESC (SPM-1017)
Motor
Servos:
- Ailerons: (2) Servo A200 Offset (SPMSA200)
- Elevator: (1) Servo A201 (SPMSA201)
- Rudder: (1) Servo A201 (SPMSA201)
- Flap: (1) Servo A202 (SPMSA202)

Recommended additional items:

Transmitter: DX6e DXS 2.4 GHz (SPMR6655)
Onboard Battery: Spektrum 4S 300 mAh, 30C (SPMX3003SJ30)
Charger: S155 Charger (SPMXC2050)
Adapter/Charge Cable from IC3 to JST-RCY (SPMXCA310)
Optional Batteries: SPMX3003SJ30 LiPo Battery 11.1V 300mAh 30C

Included Items

Receiver/ESC: Spektrum™ AS3X/SAFE Receiver/ESC (SPM-1017)
Motor: 1412-1500kV Brushless Outrunner
Servos: Ailerons (2x Servo A200 Offset), Elevator (1x Servo A201), Rudder (1x Servo A201), Flaps (1x Servo A202)

Recommended Equipment

Transmitter: DX6e DXS 2.4 GHz (SPMR6655)
Onboard Battery: Spektrum 4S 300 mAh, 30C (SPMX3003SJ30)
Charger: S155 Charger (SPMXC2050)
Adapter/Cable: IC3 to JST-RCY Charging Cable (SPMXCA310)
Optional Battery: LiPo 11.1V 300mAh 30C: RCY (SPMX3003SJ30)

Product Usage Instructions

Model Assembly:

Terminology Conventions
Throughout the product’s documentation, certain terms are used to indicate the level of potential damage or serious injury that may occur if the procedures are not followed correctly.

Wing Assembly:

Install the wing by inserting the front wing mounting tabs into the upper fuselage holes.
Connect the multi-connector to the connector socket on the wing.
Gently press on the back of the wing to ensure it is fully inserted.
Secure the wing in place with a cross-head screwdriver M2 x 18 mm. Do not overtighten the screw.

Low Voltage Cutoff (LVC):
WARNING: Continuing to fly after the LVC warning may damage the batteries.

Transmitter Configuration:
If your transmitter allows, activate the throttle cut function. Always activate throttle cut before approaching the aircraft.

Transmitter Settings for Telemetry:

Rx V Min: 4.2V
Smart ESC Low Voltage Alarm: 3.4V
Smart Battery Startup Volt Minimum: 4.0V
Motor Pole Count: 12

NX Series Transmitter Setup:

Go to Model Select and choose Add New Model at the bottom of the list. Select Airplane Model Type, then Create.
Set Model Name, Aircraft Type (choose Wing: 1 Ail 1 Flap Tail: Normal).
In Main Screen, enter Function List.
Adjust Dual Rates (D/R) and Expo settings for Aileron control.
- Switch F for High Rates: 100%, Expo 10%
- Switch F for Low Rates: 70%, Expo 5%

Assembly and Maintenance
Assembly of the model includes wing installation and ensuring all connections are secure. Proper maintenance includes checking all moving parts and electronics before and after flights.

Troubleshooting
If the aircraft exhibits abnormal behavior such as unresponsive controls or erratic movements, refer to the troubleshooting guide provided in the manual for assistance or contact Horizon Hobby’s customer service.

Warranty and Support
Horizon Hobby provides a limited warranty that covers defects in materials and workmanship from the date of purchase. Warranty claims should be directed to Horizon Hobby’s customer service. For more information on the warranty, limitations, and customer service contact details, visit Horizon Hobby Support and Compliance.

Manufacturer and Support Contact Information
For product support or warranty service, here are the details:

EU State of Purchase: Horizon Hobby Technical Service
Email: service@horizonhobby.de
Phone: +49 (0) 4121 2655 100
Address: Hanskampring 9, D 22885 Barsbüttel, Germany

Notice
All instructions, warranties, and other relevant documents are subject to change at the sole discretion of Horizon Hobby, LLC. For up-to-date product documentation, visit www.horizonhobby.com or towerhobbies.com and click on the Support section for the product.

Terminology Co

European Union Compliance Statement
The Micro DRACO 800mm BNF Basic (EFL13550) complies with the essential requirements and other relevant provisions of the European Directives. The full declaration of conformity can be found at Horizon Hobby Compliance Support. For further details on Spektrum RC transmitters and electronics, visit SpektrumRC.com.

For more information, visit www.horizonhobby.com.

Scan the QR code and select the Manuals and Support quick links from the product page for the most up-to-date manual information. ©2023 Horizon Hobby, LLC. E-flite, AS3X, DSM, DSM2, DSMX, ModelMatch, Bind-N-Fly, the Bind-N-Fly logo and the Horizon Hobby logo are trademarks or registered trademarks of Horizon Hobby, LLC. The Spektrum trademark is used with permission of Bachmann Industries, Inc.
and are used under license by Horizon Hobby, LLC. All other trademarks, service marks and logos are property of their respective owners. US 8,672,726 US 9,056,667 US 9,753,457. US 10,078,329. US 9,930,567. US 10,419,970. Other patents pending.
http://www.horizonhobby.com/

Frequently Asked Questions (FAQ)

Where can I find the most up-to-date manual for my Micro DRACO 800mm?
You can visit www.horizonhobby.com or towerhobbies.com and access the Support section for the latest manual.

How should I charge the recommended battery?

Use the S155 Charger with the provided adapter/cable from IC3 to JST-RCY for safe and efficient charging.

What should I do if my Micro DRACO 800mm is not responding correctly to controls?

Refer to the troubleshooting guide in the manual. If the issue persists, contact Horizon Hobby's customer service for assistance.

How can I ensure my Micro DRACO 800mm is covered by warranty?

Keep your proof of purchase and make sure to follow all operation and maintenance instructions. Contact Horizon Hobby customer service for warranty claims.

Who do I contact for technical support or warranty service?

For technical support or warranty service within the European Union, you can contact Horizon Hobby Technical Service at service@horizonhobby.de or call +49 (0) 4121 2655 100. For the registered EU manufacturer and importer information, refer to the European Union compliance statement in the manual.