H3R PERFORMANCE MX100R Fire Extinguishers Instruction Manual
- May 15, 2024
- H3R PERFORMANCE
Table of Contents
**H3R PERFORMANCE MX100R Fire Extinguishers Instruction Manual
**
MODULE INSTRUCTION
Model| MX100R/B/C 1 MX250R/B/C|
**MX500R/B/C***
---|---|---
Extinguishing Agent| Purple K| Monoammonium phosphate| Monoammonium phosphate
Agent Weight| 1.0 lb.| 2.5 lb.| 5.0 lb.
Gross Weight| 2.2 lb.| 5.0 lb.| 8.8 lb.
UL Classification| 2B:C| 1A:10B:C| 3A:408:C
Height| 10.0 in.| 14.8 in.| 15.3 in.
Width| 3.6 in.| 4.5 in.| 7.25 in.
Cylinder diameter| 2.6 in.| 3.0 in.| 4.3 in.
USCG Approval| None| 5-B| 20-B
Discharge range| 5-8 ft.| 9-15 ft.| 12-18 ft.
Discharge time| 8.5 sec.| 9 sec.| 14 sec.
- Available finishes: R – Red powder coat; B – Black powder coat; C – Chrome-plated
MaxOut™ Dry Chemical fire extinguishers are a proven defense against flammable
liquid fires, and they don’t conduct electricity back to the operator – so
important in an automotive environment. MaxOut™ extinguishers containing more
than 1 lb. of agent are also “A” rated for common combustibles like
wood, paper, rubber, and some plastics. This added effectiveness makes them
ideal for outdoor, marine and home use as well. MaxOut™ extinguishers contain
free flowing and noncaking additives and will not “brick up” like some dry
chemical extinguishers can.
EXTREME DUTY QUICK RELEASE BRACKETS
Our quick release Extreme Duty brackets fit our 2.5 lb. and 5 lb. extinguishers and provide a secure mounting solution for flat surfaces or 1 5/8” and 1 3/4” roll bars.
| Model | Description |
|---|---|
| NB300 | Flat surface mount for 2.5 lb. extinguishers |
| NB425 | Flat surface mount for 5.0 lb. extinguishers |
| NBR301 | 15/8″ Roll bar mount for 2.5 lb. extinguishers |
| NBR401 | 15/8″ Roll bar mount for 5.0 lb. extinguishers |
| NBR302 | 13/4″ Roll bar mount for 2.5 lb. extinguishers |
| NBR402 | 13/4″ Roll bar mount for 5.0 lb. extinguishers |
- Designed for use with H3R Performance fire extinguishers.
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
SM01BK – FIRE EXTINGUISHER SEAT MOUNT
Our SM01BK fire extinguisher seat mount installs easily in many (though not all) vehicles, attaching to the seat rail bolts or above the slider of the driver or front passenger seats.* Not only does this put the extinguisher at your fingertips, but it avoids the need to drill mounting holes into your vehicle.
- Places extinguisher within driver’s reach
- Provides a versatile mounting platform for any H3R Performance flat surface bracket
- Fully adjustable, lightweight aluminum construction
Mounting to seat rail bolts may restrict forward seat motion on certain
vehicles.
Mounting to seat slider (where possible) maximizes range of seat movement.
WARNING: Cancer – www.P65Warnings.ca.gov
BBP01 – BRACKET BACKING PLATES
Our BBP01 Bracket Backing Plates simplify the installation of mounting brackets to MOLLE panels or flat panel surfaces. Just align the threaded backing plate holes with the mounting holes of our Extreme Duty or standard bracket and use the included screws. Each set includes two, 2.6” x 1” plates.
- Places extinguisher within driver’s reach
- Provides a versatile mounting platform for any H3R Performance flat surface bracket
- Fully adjustable, lightweight aluminum construction
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov