H3R PERFORMANCE R – 011923 Jeep Wrangler JLU Fire Extinguisher Mount Owner’s Manual
- June 17, 2024
- H3R PERFORMANCE
Table of Contents
H3R PERFORMANCE R – 011923 Jeep Wrangler JLU Fire Extinguisher Mount
Product Specifications
- Product: Jeep Wrangler JLU Fire Extinguisher Mount
- Manufacturer: H3R Performance
- Components Included: JLU Fire Extinguisher Mount, Self-tapping screw, Split washer, Flathead socket cap screw, Philips flathead undercut screw, Button socket cap screw
Product Usage Instructions:
Assembly and Installation:
- Attach your preferred H3R Performance bracket to the JLU mount using the supplied fasteners.
- Use a T25 Torx bit to remove the factory screw that attaches the plastic molding to the roll bar.
- Thread the supplied self-tapping screw into the factory hole in the roll bar using a hammer drill and a 9/16 socket. Do not drill at an angle.
- Do not thread the self-tapping screw all the way into the roll bar. Stop once resistance is felt – about 3/16 inch from contact with the roll bar.
- Remove the self-tapping screw, position the JLU mount so that the top hole aligns with the factory roll bar hole.
- Re-insert the self-tapping screw along with the supplied split washer. Consider using thread-locking fluid for a secure fit.
Frequently Asked Questions (FAQ):
-
Q: Can I install this product myself?
A: It is recommended that a professional installs and/or inspects the installation of this product for safety reasons. Follow the provided installation guide carefully. -
Q: What if I encounter any issues during installation?
A: If you face any difficulties during installation or have questions, please contact H3R Performance customer support forassistance.
See assembly and installation video!
www.h3rperformance.com/qrv/jlu-mount-install-
video
Thank you for your purchase! Our Jeep JLU fire extinguisher mount provides a secure platform upon which you can install any H3R Performance fire extinguisher mounting bracket.
Product Components
| Item # | Description | Qty. |
|---|---|---|
| 1 | JLU Fire Extinguisher Mount | 1 |
| 2 | 3/8”-16 self-tapping screw (requires 9/16” socket) | 1 |
| 3 | 3/8” Split washer | 1 |
| 4 | 10-32 NF x 3/8” Flathead socket cap screw for the ProLock bracket (requires | |
| 1/8” Allen key) | 4 | |
| 5 | 10-32 NF x 3/8” Philips flathead undercut screw for the Billet flat surface | |
| mount (requires #2 Philips bit) | 4 | |
| 6 | 10-32 NF x 3/8” Button socket cap screw for the Extreme Duty Bracket Flat | |
| Surface Mount (requires 1/8” Allen key) | 4 | |
| 7 | 10-32 NF x 1/4” Button socket cap screw for the standard vehicle bracket | |
| (requires 1/8” Allen Key) | 4 |
DISCLAIMER: A professional should install and/or inspect installation of this product. In no event may H3R Performance be held responsible for unsafe installation, inspection, testing, operation, and maintenance practices of users employing this product or for any property damage or personal injuries arising out of the use or handling of this product by anyone other than trained users having appropriate technical and mechanical expertise.
Installation
- Attach your preferred H3R Performance bracket to the JLU mount using the four (4) supplied fasteners (#4, #5, #6, #7)
- Use a T25 Torx bit (not included) to remove the factory screw that attaches the plastic molding to the roll bar.
- Thread the supplied, 3/8”-16 self-tapping screw (#2) into the factory hole in the roll bar using a hammer drill and a 9/16” socket (not included), being careful not to drill at an angle. IMPORTANT! Do not thread the self-tapping screw all the way into the roll bar. Stop once resistance is felt – about 3/16 inch from contact with the roll bar.
- Remove the 3/8”-16 self-tapping screw, and position the JLU mount (#1) so that the top hole of the mount aligns with the factory roll bar hole.
- Re-insert the 3/8”-16 self-tapping screw along with the supplied split washer. Consider using a thread-locking fluid (not included) to achieve the most secure fit.
Limited Warranty
H3R Performance, Inc. (“H3R”) warrants this product for a period of one (1) year from the date of purchase to be free from defects in material and workmanship. During the warranty period any such defects will be repaired or the defective mount replaced. This warranty does not cover defects resulting from modification, alteration, misuse, exposure to corrosive conditions or improper installation or maintenance. ALL IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF FITNESS FOR PURPOSE AND MERCHANTABILITY, ARE LIMITED TO THE TIME PERIODS STATED ABOVE. IN NO EVENT SHALL H3R BE LIABLE TO INCIDENTAL OR CONSEQUENTIAL DAMAGES. H3R neither assumes nor authorizes any representative or other person to assume for it, any obligation or liability other than as expressly set forth herein. This warranty gives you specific legal rights and you may have other rights which vary from state to state. To obtain performance of the obligation of this warranty, write to H3R Performance, Inc., 103 H Street, Petaluma, CA 94952, or email H3Rinfo@H3RPerformance.com for instructions.
103 H Street, Petaluma, CA 94952 T 800-249-4289 F 707-765-3395 h3rinfo@H3Rperformance.com www.H3Rperformance.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>