zuca Assembly2020 Disc Golf Cart Replacement Bag Instruction Manual
- June 17, 2024
- zuca
Table of Contents
zuca Assembly2020 Disc Golf Cart Replacement Bag
KIT PARTS
NO TOOLS REQUIRED.
All-Terrain Fender Installation Instructions
- Remove both wheels, spacers and axle. (no image)
- Position the fender against the bag frame, slotting the fender over the frame into position A and inside the circle in position B.
- The parameter is incorrect. Image size is not supported. Each image dimension must be between 40 and 2600 pixels.
- Slide the axle back through the spacer about halfway through the frame. (If your AT axle knob is permanently affixed, you will need to thread the wheel in first).
- Repeat Steps 2-3 with the second fender.
- Slide the axle all the way through the frame, threading the axle through the second spacer.
- Reattach both wheels and tighten the axle knobs by simultaneously turning the knobs in opposite directions. Do not over tighten. Spin both wheels at the same time to test for equal fluid motion and adjust tightening as required. Your All-Terrain Fender installation is now complete!
Gear up and go!
Documents / Resources
| zuca
Assembly2020 Disc Golf Cart Replacement
Bag
[pdf] Instruction Manual
Assembly2020 Disc Golf Cart Replacement Bag, Assembly2020, Disc Golf Cart
Replacement Bag, Golf Cart Replacement Bag, Cart Replacement Bag, Replacement
Bag
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>