MIDEA Natural Gas Cooktop 800mm Instruction Manual

MIDEA Natural Gas Cooktop 800mm

Specifications

• Product : MIDEA Natural Gas Cooktop
• Size : 800mm

Product Information

Installation Instructions

This appliance shall be installed in accordance with regulations in force and only used in a well-ventilated space. Prior to installation, ensure that the gas and electrical supply complies with the type stated on the rating plate. Do not use this appliance as a space heater. The gas pipe and electrical cable must be installed in such a way that they do not touch any parts of the appliance.

User Guide

Please read the Instruction Manual before installing or using the appliance. Ensure the booklet is passed on if the appliance is sold or transferred to another person. Safety precautions should be followed to prevent accidents caused by misuse.

How to Use the Appliance

Follow the positioning, installation, and gas connection instructions provided in the manual. Ensure proper ventilation while using the cooktop. In case of a gas leak, follow the specified actions to ensure safety.

Cleaning and Maintenance

Refer to the manual for cleaning and maintenance instructions. Keep children away from the appliance when in use as it can get hot. Supervise children to ensure safe usage of the appliance.

FAQ

What should I do in case of a gas leak?

If you suspect a gas leak, stop using the product, close the middle valve, ventilate the area by opening windows, and contact the service center immediately using a phone outside.

Warning notices : Before using this product, please read this manual carefully and keep  it for future reference. The design and specifications are subject to change without prior notice for product improvement.
Consult with your dealer or manufacturer for details.

Preface

Thank you for choosing our gas cooktop. To use this appliance correctly and prevent any potential risk, read these instructions before using the appliance.

Keep these instructions in a place where you can find them easily. If you are unsure of any of the information contained in these instructions, please contact our customer care center.
The manufacturer shall not be responsible for any damages to persons or property caused by incorrect installation or use of the appliance. The appliance has been certified for use in countries other than those marked on the appliance.

The manufacturer also reserves the right to make any modifications to the products as may be considered necessary or useful, also in the interests of the user, without jeopardizing the main functional and safety features of the products themselves. The appliance is designed for a domestic environment and not a commercial one.

Safety Instructions

• Please take the time to read this Instruction Manual before installing or using the appliance.
• This instruction booklet must be kept with the appliance for any future reference. If the appliance is sold or transferred to another person, ensure the booklet is passed on to the new user.
• The manufacturer declines any liability should these safety measures not be observed.
• The following marks are made to be easily understood so that you can prevent any accident caused by misuse in advance, and use the appliance more conveniently.
• Read the following contents thoroughly and ensure you understand them.

Danger/Warning: Neglect of this mark may result in severe personal injury or death

Caution: Neglect of this mark may result in minor personal injury or property damage.

The following marks are used in the Instruction Manual as follows:

Caution

No Access
No Fire

Tool Must Do

Danger

If gas seems to leak, take the actions as follows:

• Do not turn on the light.
• Do not switch on/off any electrical appliance and do not touch any electric plug.
• Do not use a telephone

1. Stop using the product and close the middle valve.
2. Open the window to ventilate.
3. Contact our service centre by using a phone outside.

The fuel gas contains mercaptan so that you can smell the gas leak (smell of rotten garlic or egg) even where only 1/1000 of the gas is in the air.

Installation

Warning

• This appliance shall be installed in accordance with regulations in force and only used in a well-ventilated space.
• Prior to installation, ensure that the gas and electrical supply complies with the type stated on the rating plate.
• Do not use this appliance as a space heater.
• The gas pipe and electrical cable must be installed in such a way that they do not touch any parts or the appliance.

Caution

• This appliance should be installed by a qualified technician or installer.
• The adjustment conditions for this appliance are stated on the label or data plate.
• Remove all packaging before using the appliance.
• After unpacking the appliance, make sure the product is not damaged and that the connection cord is in perfect condition. Otherwise, contact the dealer before installing the appliance.
• The adjacent furniture and all materials used in the installation must be able to withstand a minimum temperature of 85°C above the ambient temperature of the room it is located in, whilst in use.
• In the event of burner flames being accidentally extinguished, turn off the burner control and do not attempt to re-ignite the burner for at least one minute.
• The use of a gas cooking appliance results in the production of heat and moisture in the room in which it is installed. Ensure that the kitchen is well ventilated: keep natural ventilation holes open or install a mechanical ventilation device (mechanical extractor hood
• Prolonged intensive use of the appliance may call for additional ventilation, for example, opening of a window, or more effective ventilation, for example increasing the level of mechanical ventilation where present.

Child and People Safety

Warning

• Do not allow children to play near or with the appliance. The appliance gets hot when it is in use. Children should be kept away until it has cooled.

Caution

• This appliance is designed to be operated by adults.
• Children can also injure themselves by pulling pans or pots off the appliance.
• This appliance is not intended for use by children or other persons whose physical, sensory or mental capabilities or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction by a responsible person to ensure that they can use the appliance safely.

During Use

• Only use the appliance for preparing food.
• Do not modify this appliance. The burner panel is not designed to operate from an external timer or separate remote control system.
• The use of a gas cooking appliance results in the production of heat and moisture in the room in which it is installed. Ensure that the kitchen is well-ventilated: keep natural ventilation holes open or install a mechanical ventilation device (mechanical extractor hood).
• Do not use this appliance if it comes in contact with water. Do not operate this appliance with wet hands.
• The heating and cooking surfaces of the appliance become hot when they are in use, take all due precautions.
• Do not use large cloths, tea towels or similar as the ends could touch the flames and catch fire.
• Never leave the appliance unattended when cooking.
• Unstable or misshapen pans should not be used on the appliance as they can cause an accident by tipping or spillage.
• Do not use or store flammable materials in the storage drawer near this appliance.
• Perishable food, plastic items, and aerosols may be affected by heat and should not stored above or below the appliance.
• Do not spray aerosols in the vicinity of this appliance while it is in operation.
• Ensure the control knobs are in the ‘position when not in use.

Caution

• This appliance is intended for domestic cooking only.It is not designed for commercial or industrial purposes.
• Prolonged intensive use of the appliance may call for additional ventilation,for example, opening of a window, or increasing the level of mechanical ventilation where present.
• Us beat pot handers come near open names when citing cooks are pans.
• Take care not to let pot holders or gloves get damp or wet, as this causes heat to transfer through the material quicker with the risk of burning yourself.
• Only ever use the burners after placing pots and pans on them. Do not heat up any empty pots or pans.
• Never use plastic or aluminum foil dishes on the appliance.
• When using other electrical appliances, ensure the cable does not come into contact with the appliance surfaces of the cooking appliance.
• If you have any mechanical parts eg. an artificial heart in your body, consult a doctor before using the appliance.
• Do not use a tea towel or similar materials in place of a pot holder. Such clothes can catch fire on a hot burner.
• When using glass cookware, make sure it is designed for top-plate cooking. If the surface is made of glass-cracked, switch off the appliance to avoid defeat electrocution.
• To minimize the possibility of burns, ignition of flammable materials and spillage, turn cookware handles toward the side or center of the top plate without extending over adjacent burners.
• Always turn burner controls off before removing cookware.
• Carefully watch foods being fried at a high flame setting. Always heat fat slowly and watch as it heats.
• Foods for frying should be as dry as possible. Frost on frozen foods or moisture on fresh foods can cause hot fat to bubble up and over the sides of the pan.
• Never try to move a pan of hot fat, especially a deep-fat fryer. Wait until the fat is completely cool.

Cleaning and Service

Warning

• Never use abrasive or caustic cleaning agents.
• This appliance should only be repaired or serviced by an authorized Service Engineer and only genuine approved spare parts should be used

Caution

• Before attempting to clean the appliance, it should be disconnected from the mains and cooled.
• You should not use a steam jet or any other high-pressure cleaning equipment to clean the appliance.

Environmental Information

• After installation, please dispose of the packaging with due regard to safety and the environment.
• When disposing of an old appliance, make it unusable, by cutting off the cable.

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

• This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
• Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.
• Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

Description of the appliance

accessories

How to Use the Appliance

The following symbols will appear on the control panel, next to each control handle

Black circle : gas off

Large flame : maximum setting
Small flame : minimum setting

• The minimum setting is at the end of the anti-clockwise rotation of the control handle.
• All operation positions must be selected between the maximum and minimum positions.
• The symbol on the control panel, next to the control handle will indicate which burner it operates.

Automatic ignition with flame failure safety device

The appliance is fitted with a flame failure safety device on each burner, which is designed to stop the flow of gas to the burner head in the event of the flame going out.

How to Use the Appliance

Automatic ignition with flame failure safety device

The appliance is fitted with a flame failure safety device on each burner, which is designed to stop the flow of gas to the burner head in the event of the flame going out.

To ignite a burner:

• Press in the control knob of the burner that you wish to light and turn it anti-clockwise to the maximum position.
• If you keep the control knob depressed, the automatic ignition for the burner will operate.
• You should hold down the control knob for 15 seconds after the flame on the burner has lit. If after 15s the burner has not lit, stop operating thedevice and open the compartment door and/or wait at least 1 min before attempting a further ignition of the burner.
• After this 15-second interval, to regulate the flame you should continue turning the control knob anti-clockwise until the flame is at a suitable level. The operating position MUST be at a position between the maximum and minimum position.
• To switch the burner off, turn the control knob fully clockwise to the gas-off position.
• In case of power failure, the burners can be lit by carefully using a match.

How to Use the Appliance

Timer function (only applied for the right hob)

Timer function on/off

On : Touch any button gently, the screen lights indicate that the function is on.
Off : Press the buttons at the same time for 3 seconds to turn off the timer function.

The setting of Timer Function

1. Press th H button for 2 seconds to set the hour, press the M for 2 seconds to set minutes, touch M to increase, and touch H to decrease, the final setting time will be seen as the setting time if no operation in 5 seconds.
2. When the Timer function ended, the right hob flame out, the indicator lig will flick, the buzzer will bee bee (last for 3 minutes), please turn the knob to off position.
   • Note : during the warning period, touching H or M will turn off the warning status.
   • “ ”indicates the battery power, if the power indicator light flicked while setting the timer function, it indicates that can not set the timer function by now, need to replace the battery. One bar of the battery power indicates that the power is too low, please replace the battery within 2-3 weeks (D battery).

Safety and Energy-saving advice

• The diameter of the bottom of the pan should correspond to that of the burner.

• Do not use cookware that overlaps the edge of the burner.
• It is not recommended to use roasting pans, frying pans or grill stones heated simultaneously on several burners because the resulting heat build-up may damage the appliance.
• Do not touch the top plate and trivet whilst in use for a certain period after use.
• As soon as a liquid starts boiling, turn down the flame so that it will barely keep the liquid simmering.

Cleaning and Maintenance

• Cleaning operations must only be carried out when the appliance is completely cool.
• The appliance should be disconnected from your mains supply before commencing any cleaning process.
• Clean the appliance regularly, preferably after each use.
• Abrasive cleaners or sharp objects will damage the appliance surface; you should clean it using water and a little washing-up liquid.

• Take off the Pan support.
• Clean these and the control handles with a damp cloth, washing up liquid and warm water. For stubborn soiling, soak beforehand.
• Dry everything with a clean soft cloth.

Top plate

• Regularly wipe over the top plate using a soft cloth well wrung out in warm water to which a little washing-up liquid has been added.
• Dry the top plate thoroughly after cleaning.
• Thoroughly remove salty foods or liquids from the hob as soon as possible to avoid the risk of corrosion.
• Stainless steel parts of the appliance may become discolored over time. This is normal because of the high temperatures. Each time the appliance is used these parts should be cleaned with a product that is suitable for stainless steel.

BURNERS

• Remove the burner lids and Flame Spreaders by pulling them upwards and away from the top plate.
• Soak them in hot water and a little detergent or washing-up liquid.
• After cleaning and washing them, wipe and dry them carefully. Make sure that the flame holes are clean and completely dry.
• Wipe the fixed parts of the burner cup with a damp cloth and dry afterward.
• Gently wipe the ignition device and flame supervision device with a well-wrung-out cloth and wipe dry with a clean cloth.
• Before placing the burners back on the top plate, make sure that the injector is not blocked.

Re-assemble the Auxiliary, Semi-Rapid, Rapid and Triple-Crown burners as follows

1. Place the flame spreader ( 3) onto the burner cup ( 4) so that the ignition device and the flame supervision device extend through their respective holes in the flame spreader. The flame spreader must click into place correctly.
2. Position the burner lid ( 1,2 ) onto the flame speaker ( 3) so that the retaining pins fit into their respective recesses.

Replace parts in the correct order after cleaning.

• Do not mix up the top and bottom.
• The locating pins must fit exactly into the notches.

Using instructions

Warnings

• Do not modify this appliance.

• This appliance must be installed by an authorized technician or installer.

• Prior to installation, ensure that the local distribution conditions (nature of the gas and gas pressure) and the adjustment of the appliance are compatible.

• The adjustment conditions for this appliance are stated on the label (or data plate).

• This appliance is not connected to a combustion products evacuation device. It should be installed and connected in accordance with current installation regulations. Particular attention should be given to the relevant requirements regarding ventilator.

• Before installing, turn off the gas and electricity supply to the appliance.

• All appliances containing any electrical components must be earthed.

• Ensure that the gas pipe and electrical cable are installed in such a way that they do not touch any parts of the appliance that may become hot.

• Gas pipe or connectors shouldn’t be bent or blocked by any other appliances.

• Check the dimensions of the appliance as well as the dimensions of the gap to be cut in the kitchen unit.

• The panels located above the work surface, directly next to the appliance, must be made of non-flammable material. Both the strati- fied surfacing and the glue used to secure it should be heat resistant, to prevent deterioration.

• Turn on the appliance tap and light each burner.
  Check for a clear blue flame without yellow tipping.
  If burners show any abnormalities check the following :

  • The burner lid on correctly
  • The flame spreader is positioned correctly
  • Burner vertically aliased with injector NiPPle

• A full operational test and a test for possible leakages must be carried out by the fitter after installation.

• The flexible hose shall be fitted in such a way that it cannot come into contact with a moveable part of the housing unit and does not pass through any space susceptible of becoming congested.

• Grease cranes are produced at the factory to meet the requirements of all life hobs.

Positioning

• This appliance is to be built into a kitchen unit or 600mm worktop,providing the following minimum distances are allowed;
• The edges of the hob must be a minimum distance of 200mm from the side walls and 60mm from the rear wall.
• 700 mm between the highest point of the hob surface including the burners) and the underside of any horizontal surface directly above it.
• 400 mm between the hob surfaces, providing that the underside of the horizontal surface is in line with the outer edge of the hob. If the underside of the horizontal surface is lower than 400 mm, then it must be at least 50 mm away from the outer edges of the hob.
• 50 mm clearance around the appliance and between the hob surface and any combustible materials.
• You must have a gap of at least 25 mm and at most 74 mm between the underneath of the appliance and any surface that is below it.

• An oven must have forced ventilation to install a hob above it.
• Check the dimensions of the oven in the installation manual.
• The cut-out size must obey the indication.

Installing the appliance

1. Remove the pan supports, the burner lid, and the flame spreader and carefully turn the appliance upside down and place it on a cushioned mat. Take care that the Ignition devices and flame supervision devices are not damaged in this operation.
2. Apply the sponge provided around the edge of the appliance.
3. Do not leave a gap in the sealing agent or overlap the thickness. Sponge The thickness of the sponge is 3 mm. The width of the sponge is 10 mm.

Sponge

The thickness of the sponge is 3 mm. The width of the sponge is 10 mm.

Gas Connection

• This appliance must be installed and connected in accordance with installation regulations in force in the country in which the appliance is to be used.
• This appliance is supplied to run on natural gas only and cannot be used on any other type of gas without modification. Conversion for use on LPG and other gases must only be undertaken by a qualified person.
• Turn off power for safety and appliance protection. Close the middle valve to prevent gas leakage.

Keep away from inflammable materials around appliances.

Before work, put on gloves.

CAUTION
Cool off the appliance for a while right after using the appliance for your safety because you can get burners by high temperatures from the appliances. Most of the tools that you may need are shown below. Some are optional.

Replacement of gas-type fitting

Tool : Open-end wrench

Steps for operation

A: Disassemble with a wrench the gas-type fittings from the main gas tube.
When you disassemble/assemble the gas connection, use 2 spanners. One for fixing the gas connection elbow, and the other for tightening the gas hose.

B : Lock tightly a replaceable gas-type fitting onto the main gas tube.

Gas Connection

Statutory requirements

This installation must conform to the following:

• Manufacturer’s Installation instructions
• Local Gas Fitting Regulations
• Municipal Building Codes
• Refer to AS/NZS 5601.1 for Gas Installations
• S.A.A. Wiring Code
• Local Electrical Regulations
• Any other statutory regulations

Preparing to install

Refer to AS/NZS 5601.1 for piping size details. These built-in cooktops are intended to be inserted in a benchtop cutout. Only an officially authorised technician should connect the appliance. Before you begin, turn off the gas and electricity supply.

• A full operational test and a test for possible leakages must be carried out by the fitter after installation
• Access to the whole length of the connection hose must be possible and the gas hose must be replaced before its use before the end of service life (indicated on the hose.)
• Before Leaving-Check all connections for gas leaks with soap and water.
• DO NOT use a naked flame for detecting leaks. Ignite all burners both individually and concurrently to ensure the correct operation of gas valves, burners, and ignition. Turn the gas taps to a low flame position and observe the stability of the flame for each burner individually and all together. Adhere the duplicate data plate to an accessible location near the hotplate. When satisfied with the hotplate, please instruct the user on the correct method of operation. In case the appliance fails to operate correctly after all checks have been carried out, refer to the authorized service provider in your area.

Gas Connection

• Flexible Hose: If installed with a hose assembly, it must comply with AS/NZS 1869,10mmlD, class B or D, no more than 1.2m long, and installed in accordance with AS/NZS 5601.1.
• Ensure that the hose does not contact the hot surfaces of the hotplate, oven, dishwasher or any other appliance that may be installed underneath or next to the hotplate. The hose should not be subjected to abrasion, kinking or permanent deformation and should be able to be inspected along its entire length with the cooktop in the installed position. Unions compatible with the hose fittings must be used and all connections tested for gas leaks. The supply connection point shall be accessible with the appliance installed.
• WARNING : Ensure that the hose assembly is restrained from accidental contact with the flue outlet of an underbench oven.

Gas Connection

Install in accordance with relevant gas standards and/or codes of practice applicable. Connect the elbow fitting to the appliance gas manifold connection, and check that the seals between the elbow and manifold connection are in place and in good condition.

• For Natural gas: connect the natural gas appliance regulator (pictured opposite) with an integral test point using approved gas thread tape or compound to the elbow fitting.
• Ensure the supply connection point, test point, and natural regulator adjustment screw (for Natural gas installation accessible for testing and/or adjustment with the hotpla the installed position.

Where a flexible hose assembly is used, ensure it is approved to AS/NZS 1869, Class B. Any hose assembly used must be restrained from accidental contact with the flue outlet of an under-bench oven.

This hose assembly shall be suitable for connection to a fixed consumer piping outlet located as follows: Hotplates at a point 800 mm to 850 mm above the floor and in the region outside the width of the appliance to a distance of 250 mm.

Gas Specification

Trouble shooting

• Repairs should be performed by a licensed technician only. Improper repair may result in considerable damage to you and others.
• However, some minor problems can be resolved as follows :

• If the problem is not solved, please contact the customer care center.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>