LAPOND SY-E40-1 30W Portable Solar Panels User Manual
- June 17, 2024
- LAPOND
Table of Contents
Solar Panel User Manual
Model: SY-B30-01
Rev01
Technical specifications
| Model | SY-B30-01 |
|---|---|
| Solar Cell | Monocrystalline silicon |
| Peak Power | 30W（10W*3） |
| Conversion Efficiency | 21% |
| Open Circuit Voltage (Voc/V) | 21.6V |
| Short Circuit Current (Isc/A) | 1.85A |
| Maximum Power Voltage (Vmp/V ) | 18V |
| Maximum Power Current (Imp/A) | 1.66A |
| Operating Temperature (°F/°C) | -4°F~149°F(-20°C~ 65°C) |
| Unfolded Size (LWD) | 91528016 mm |
| Folded Size (LWD) | 28027032 mm (3-Folds) |
| Net Weight | 0.7Kg |
Power Regulator Module Specifications
Output 1| USB 1: 5V/3A
Output 2| USB 2: 5V/3A 9V/2A 12V/1.5A
Output 3| DC-5521: 5-22V/1.66A
Indicator Light (RED)| LED ON with Power output
LED OFF without Power output
Accessories
User Manual x1
Safety Information
- Avoid overheating the electronic board with USB port. During use, keep the board with USB port protected from direct sunlight.
- During use the product will be subject to high temperature, pay attention to not burn yourself.
- Do not use in damp rooms or in the rain. If the product comes into contact with water, moisture or other liquids, do not use it to avoid any electrical shock or damage.
- Never insert metallic objects such as keys or paper dips into the port of the product.
- To prevent malfunction or damage to the product, avoid accidental falls, do not crush, puncture or exercise a high level of pressure on the product.
- Do not store or expose your product to any source of heat, radiators, stoves or other heat sources such as the dashboard of your car in the summer.
- The shell may become hot during operation, please do not worry, this is normal.
- Condensation may occur when moving from a cold environment to a warm environment, and immediate use of the product may damage it. Before connection and reuse, the product needs to reach room temperature. This may take several hours.
- Temperature of use: -20°C – +65°C.
- Do not try to modify, repair or disassemble the product.
- Do not use a damaged product.
Using
- After unfolding the product, place it on a flat surface, away from direct water jets, with solar panels facing the sunlight. Place the board with USB port protected from direct sunlight.
- Connect a USB cable to the device you want to charge.
- Connect the USB cable to the solar panel USB port.
- With sufficient sunlight, charging will begin.
- Disconnect the USB cable from the charger after use.
- Store the charger in a cool and dry place away from heat sources, moisture and dust.
Cleaning
- Disconnect all cables before cleaning.
- If necessary, clean the solar panel with a damp cloth and let it dry completely before use.
- Use a clean brush with soft, long bristles to remove dust on the connectors.
- Do not use any solvents, corrosive or gaseous cleaning agents. Make sure no water or other liquids penetrate the housing.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>