CEYOMUR CY60 Wildlife Camera User Manual

CEYOMUR CY60 Wildlife Camera

Specifications

• Model: CEYOMUR CY60 V1.2.1
• Made in: China
• Version: 1.2
• Dimensions: 100*130mm
• Weight: 120g (Camera), 80g (USB Type C)

Product Information

The CEYOMUR CY60 V1.2.1 is a compact camera designed for capturing photos and video clips. It features a PIR sensor for motion detection and USB Type C connectivity for transferring media files to a computer.

Product Usage Instructions

Connecting to a Computer

1. Turn off the camera by switching the power button to the [OFF] position.
2. Connect the camera’s USB port to the computer using the included USB Type C cable.
3. If the connection is successful, the camera screen will display “MSDC,” allowing you to view images and videos stored on the SD card directly on the computer.

Testing PIR Sensor and Mode
If the camera is not functioning correctly, follow these steps to test the PIR sensor and mode:

Testing the Sensor

1. Place the power button in the TEST position and close the camera case.
2. Ensure all settings are in TEST mode.
3. Perform a parallel movement in front of the camera.
4. Check for a blinking red indicator light to confirm sensor functionality.

Testing the Mode

1. Format the SD card in the camera and reset it to factory settings.
2. Set the Interval to the shortest time.
3. Place the power button in the ON position; the screen should turn black.

Frequently Asked Questions (FAQ)

Q: How can I view video files on a Mac?
A: Video files may require additional software for viewing on a Mac. Ensure you have compatible software installed to play video clips from the camera.

IMPORTANT NOTE

• THANK YOU for the purchase of your CEYOMUR Trail Camera. We appreciate your business and work hard to earn your trust. Please refer to the instructions in this manual for best use of this camera.
• If your CEYOMUR Trail Camera does not seem to be functioning properly or if you are having photo/video quality issues, please feel free to e-mail us, we will try our best to solve any issues you may have quickly and professionally.
• We also welcome and value all feedback and suggestions on our camera.
• Your objective feedback and frank opinions are a major driving force for us to move forward.
• It is due to our wonderful clients and their advice that we could continue to improve our products quality and meet the needs in the ever-changing market In the end, nobody knows the product better than the user.
• We provide after sale services indefinitely, we will spare no effort to improve product quality and service levels in the future to give our customers a more personable shopping experience.
• CEYOMUR Trail Camera Service
• E-mail: support@ceyomur.co
• Hope everything goes well in your life.
• Sincerely, CEYOMUR
• For Video Instruction, Exclusive Offers, New releases, and more, please search “CEYOMUR TECH” on YouTube and Facebook or scan below QR code.

QUICK START INSTRUCTION

• Battery Installation
  Install 8 brand new AA Alkaline or Lithium batteries.(Not Included)

• Rechargeable batteries are also available.

  • Recommend Energizer™ batteries.
  • Do not mix new and old batteries.
  • Do not mix different brands batteries.

• External power supply is available.

  • External power supply output: 6V/2A
  • DC-IN plug size(External power supply plug size): 3. 5mm”l.35mm

• Insert the SD Card

  • Insert the SD card (using class 6 or faster SD Cards, up to 32GB). (Not Included)
  • -Insert the reverse side of the SD card into the card slot in OFF mode.

• caution:

  • Don’t insert or remove the SD card when the power switch is in the ON and TEST position.
  • Before inserting the SD card into the card slot after opening the camera’s front cover, please make sure that the write-protect switch on the side of the card is “off”(NOT in the “Lock” position).
  • Formatting the SD card by using the “Format memory card” parameter before using it for the first time is recommended, especially when a card has been used in other devices.

Run Quick Start

Start your new wildlife journey
Switch mode to ON –+ Motion indicator flashes blue light 5s–+ Screen turns black (Camera is working now!)

• Option: Default Setting
• Interval: 30 seconds
• Photo or Video: Photo
• Photo Resolution: 5MP
• Photo-series: 1
• Hint: Please adjust the settings by pressing menu button in TEST mode to meet your using requirements.

PRODUCT OPERATION AND MENU SETTINGS

Product Operation

OFF/ON/TEST MODE
The CEYOMUR trail camera has three basic operational modes:

OFF/ON/TEST

• OFF MODE
  Button in the OFF position The camera is completely switched off.

• ON MODE
  Power switch in the ON position ON Mode is working mode. The LCD screen will turn black after 5 seconds count-down.

• TEST MODE

  • Power switch in the TEST position (LCD screen is on).
  • Adjust settings and replay photos photos and videos.

• WORKING MODE

  • Make sure that Power switch in the ON position (do not leave it in TEST).
  • Once you switch to the ON mode. the left light indicator LED (blue) will blink for about 5 seconds. This gives you time to close and lock the front cover of the camera and then walk away. During this time, the left light indicator LED will blink red continuously. After it stops blinking, the PIR will be activated.
  • Any motion that is detected by PIR sensor will trigger the camera to capture photos or videos as programmed in the Settings Menu. Be sure you have read the descriptions of the Video Length, Interval, PIR Sensitivity and IR Brightness parameters.
  • Please note, the PIR is strongly sensitive to ambient temperature. The greater the temperature difference between the environment and your subject, the farther the possible sensing distance.

• MANUAL SHOOTING

  • The CEYOMUR trail camera can take pictures and videos manually in TEST mode. Press MODE button to choose PHOTO mode or VIDEO mode. The default mode in test mode is photo. Then press OK button, a picture will be taken and saved to the SD card. Then press MODE button again, the mode can be changed to VIDEO. Later press OK button, a video can be taken and saved to the SD card. MODE button plus OK button can let you take pictures and videos manually to test shooting angle and results.

PHOTO MODE

1. Still Photo Mode
2. Default Photo
3. Date&Time Resolution
4. Remaining Photo Capacity
5. SD Card Status
6. Temperature
7. Battery Indicator

VIDEO MODE

1. Still Photo Mode
2. Default Photo
3. Date&Time Resolution
4. Remaining Video Lengt
5. SD Card Status
6. Temperature
7. Battery Indicator

Menu Settings

Please switch to TEST mode if you want to finish settings on camera.

• Mode :
  Selects whether taking photos or videos when the motion is triggered.

• Photo resolution:
  Selects resolution for still photos. Higher resolution provides more pixels but creates larger files that take up more SD card capacity.

• Photo series:
  Selects how many photos are taken in Photo mode each motion trigger.

• Video resolution:
  Selects the video resolution. Higher resolution produces better quality videos but creates larger files that take up more SD card capacity. Using high-speed SD cards (Sandisk0 SDHC class 6 or higher) is recommended if you will use higher video settings.

• Video length:
  Specify the duration of a video recording when the motion is triggered. To extend the camera life, we recommend setting shorter video length.

• Cycle storage:
  When the memory card is full, the camera automatically keeps taking photos and videos, overwriting the old ones.

• PIR Interval:
  Set a lag between one picture and the next, one video and the next, or pictures and an video(when you choose picture+ video mode).

  • Caution:
    PIR Interval have great influence on battery life. The shorter the interval, the higher frequency to capture targets, but more battery power is consumed;
    The longer the interval, the lower frequency to capture the targets, and less battery power is consumed.

• PIR Sensitivity:
  Selects the sensitivity of the PIR sensor. The “High” setting will make the camera more sensitive to infrared (heat) and more easily triggered by motion, and the “Low” setting makes it less sensitive to heat and motion.
  Caution :

  • High sensitivity, the camera is more sensitive, but it consumes more power.
  • Low sensitivity, save more power.

• IR Brightness:
  Adjust the brightness of the IR LED lights.

• Side motion sensors:
  2 side PIR sensors will be the same as the central PIR sensor to detect motion when they are set to On mode. Detection range will be wider than that when only the central PIR sensor works.

• Target recording time:

  • Set timer to “On” let the camera only be active within a certain time. Once “On” has been confirmed with the OK key, the start and end time can be set.
  • The camera will not be triggered and will not take any photos when the time in not included in this period.

• Time Lapse:
  Time lapse is a kind of time-compression technology, which can make a long time scene change process into a short time video. During the set time, the camera takes an image at set interval. It’s generally used to take slow changing scenes, such as clouds floating across the sky, snails moving and so on.
  Note:

  • In this mode, the PIR sensors would stop working. the camera keeps taking recordings even when there is no motion. It takes “images” in the setting interval time. These images finally form a video when replayed. Photo series will not be highlighted in this mode
  • In this mode, the maximum capacity of the video is 4GB. When the video exceeds 4GB, the camera will create a new file automatically.

• Language:
  Select the desired menu language.

• Time &date

1.  **Set time & date**  

Set the year, month and date (based on the date format you set), then the hour (based on the time format you set) and minute.

2.  **Time format:** Set time format.
3.  **Date format:** Set date format.

• Serial No.:
  In order to distinguish other cameras, each camera can be set a serial number. When watermark is on, the camera number is displayed at the bottom of the photo and video.

• Temp Unit:
  Set temperature unit

• Beep sound:
  Select “ON” to open beep sound, you will hear it every time you press the buttons. “OFF” means close.

• Audio recording:
  Select if record audio while taking a video.

• Stamp:
  Select “Time& date”/ “Date”, the date & time or only date will be imprinted on every photo/video. Select “Off” for no imprint.

• Password protection:
  After selecting “On”, inputting a four-digit password to protect your camera against unauthorized access. Use the UP/DOWN keys (to change the setting) and OK keys (to move to the next field) to set the four-digit code.

Note:
This password must be entered when the camera is switched on in the TEST mode. If you forget the password by accident, “1111” is the all-purpose password.

• Format memory card:

  • Deletes (erases) all files stored on a card to prepare it for reuse. Always format a card that has been previously used in other devices or if it is a new card.
  • Select “Yes” and press OK to execute, press MENU (or select “No” then press OK) to exit without formatting.
  • Caution!
    Make sure you have downloaded and backed up any files you want to preserve first!

• Reset settings:
  Select “Yes” and press OK to restore all parameters to the original factory default settings. If the camera is behaving oddly and you think you may have changed the setting for something accidentally (but aren’t sure which one), this will reset all parameters to their most commonly used or “generic” settings.

• System
  Displays current firmware version for reference.

Replay Mode

All photos and videos taken by the CEYOMUR trail camera can be viewed directly on the built-in screen, also can be protected, unprotected and deleted directly on the camera.

• Viewing Files on the LCD screen
  Switch to TEST mode ➔ Press Mode button twice ➔ Press UP or DOWN to check your images and videos.

• Deleting files & Activating Slide Show & Writing Protect

  • When you view photos or videos, press [Menul button, then you can press [UPI or [DOWNI button to choose to delete current file, delete all files, activate slide show or write protect.
  • Delete current file & Delete all files: you can choose to delete the unwanted pictures or videos, or all of them.(Notice: All deleted files cannot be restored.)
  • Activate slide show: All photos will be displayed on the LCD screen as the slide show. Pressing OK button can stop this mode.
  • Write protect: You can choose lock one file or all files as you need. Once locked, they cannot be deleted, otherwise they are unlocked. When the file is protected, the pattern “On”will be shown on the upper left corner of the file.

After you unlock it, the pattern will disappear.

• Transferring Files to a Computer
  When using a PC (or Mac) to view photos (or video clips), First, put the power switch to the [OFF] position, then use USB Type C(included) to connect the camera USB port with the computer. If the connection is done successfully, the camera screen will show MSDC. Then you could view images/videos saved on the SD card directly on the PC. *video files may require additional software for viewing on a Mac.

Testing PIR Sensor and Mode

If the camera does not take pictures and videos, please follow the below instructions to test PIR sensor to confirm whether it works or not.

Testing the sensor

1. Place the power button at the “TEST” position, close the camera case, and place it on the table; And all the settings need to be finished on TEST mode.
2. Do a parallel movement in front of the camera.
3. Check if the red indicator light will blink. If yes, then the sensor can work.

Testing the mode

1. A. Format the SD card in the camera and restore the camera to factory settings;
2. Set the “Interval” to the shortest time;
3. Place the power button at the “ON” position, the screen will turn black itself in few seconds, which means the camera is working. Then close the camera case, and place it on the table;
4. Do a parallel movement in front of the camera for about 3 minutes;
5. Switch to test mode, check if there are pictures taken by the camera under replay mode.

WARRANTY

• All CEYOMUR Trail Camera carries a 12-month warranty from purchase date.
• Please also feel free to let us know what we could do to assist you if you have any problems about the game camera.
• CEYOMUR CUSTOMER SERVICE E-MAIL ADDRESS : Quick-Contact: support@ceyomur.co

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>