PRODVX APPC-10SLBe Android Touch Display User Guide
- June 11, 2024
- Prodvx
Table of Contents
Quick start guide
APPC-1 OSLBe
The information in this document is subject to change without notice. © 2022 ProDVX Europe B.V. All rights reserved.
APPC-10SLBe
Quick start guide
This package contains:
Please note that it is preferred not to use power tools to attach the
device to the mount or stand.
How to start:
Step 1: Take contents out of the box, make sure all components are present.
Step 2: Install wall/glass mount or desk stand using manual screw driver,
check designated mount/stand manual for instructions.
Step 3: Step 3: Connect to power via power adapter or PoE+. If using the power
adapter, please remove the rubber plug before inserting the power cable if
applicable.
Step 4: Connect to Internet through Wi-Fi, PoE+, or LAN.
Step 5: If applicable, install and configure preferred application.
Quick connection settings
Step 1: Plug in PoE+ cable or optional power adapter to turn on the display.
This will bring you to the installation wizard.
Step 2. Select your desired language and click the yellow start button.
Step 3. Copy apps & data if desired, otherwise click Don’t copy, located at
the bottom left of the screen.
Step 4 Accept the desired Google Services and scroll down and click the blue
Accept button.
Step 5. Set a screen lock if desired, or click Skip to continue without one.
Step 6. If using PoE+, continue to
Step 7. If using Wi-Fi connection, swipe up when arriving on the home screen
to reach the app drawer. Select Settings and navigate to the Network &
internet settings. Fill in credentials to access your Wi-Fi network.
Step 7. Install and configure desired applications.
Optional accessories
Caution: Please note this product contains a small clock battery. Please
return the product to a certified repair centre for proper replacement of the
battery; battery disposal can be dangerous.
WARNING: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT
15.21 You are cautioned that changes or modifications not expressly approved
by the part responsible for compliance could void the user’s authority to
operate the equipment.
15.105(b) This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: – Reorient or relocate
the receiving antenna. – Increase the separation between the equipment and
receiver. – Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected. – Consult the dealer or an
experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and
2) this device must accept any interference received, including interference
that may cause undesired operation of the device.
FCC RF Radiation Exposure Statement
- This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- This equipment complies with FCC RF radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and operated
with a minimum distance of 20 centimeters between the radiator and your body.
This equipment should be installed.
For product available in the USA/Canada market, only channel 1-11 can be operated. Selection of other channels is not possible. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules.
Correct Disposal of this product. This marking indicates that this product should not be disposed of with other (household) waste. To prevent possible harm to the environment or human health
**** : from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the reseller where the product was purchased. They can take this product for environmentally safe recycling.
The guaranteed environmental specifications for the ProDVX Display and accessories are: – Operating temperature: : 0 – 40 °C / 32 – 104 °F – Storage temperature: -10 – 55 °C / 14 -131 °F – Relative humidity: 10 – 85% at 40 °C / 104 °F non-condensing
Android is a trademark of Google LLC.
https://www.prodvx.com/support
Please check the website or scan the OR-code for more product information. www.prodvx.com/support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>