TURBRO TS25 Smart Electric Fireplace User Guide
- June 17, 2024
- TURBRO
Table of Contents
TURBRO TS25 Smart Electric Fireplace
Smart Electric Fireplace Connection Guide
Specifications:
- Model No: TS25 Smart
- Compatibility: iOS 9.3 or later
- Connection: Wi-Fi
- Control: AIR.ai App
- Bluetooth: Yes
Product Usage Instructions
Connect to AIR.ai App:
- Scan the QR code below or search ‘AIR.ai’ on App Store or Google Play and download it.
- Launch the AIR.ai App and log in to your account (sign up for your first use).
- Turn on the Bluetooth of your phone and connect your phone to your Wi-Fi.
- When the fireplace is plugged in, it will automatically enter Wi-Fi pairing mode. The screen will flash ‘PO’.
- To reactivate Wi-Fi pairing mode, press and hold the Timer Button for 5 seconds.
Setting Up Connection:
- In the AIR.ai App, press the ‘+’ button to search for the fireplace automatically.
- Select your Wi-Fi network and enter the password.
- Wait for the connection process to complete.
- Once connected, rename your device as desired.
Note:
The fireplace WiFi cannot connect to 2 mobile devices simultaneously. To
switch control to another device, delete the connection on the original mobile
device and repeat the connection steps on the new device.
FAQ:
Q: Can I control the fireplace from multiple mobile devices?
A: The fireplace WiFi can only be connected to one mobile device at a
time. You can share control via the AIR.ai App after initial setup.
Q: How do I reset the connection to set up with a new mobile device?
A: Delete the connection on the current mobile device, and then follow
the initial connection steps on the new device to establish a new connection.
MODEL NO: TS25 Smart
Connect to AIR.ai App
Use the AIR.ai App to control your electric fireplace from your iPhone or Android device even when you are away from the home.
System Requirements
- Supported wireless routers must have an available 2.4 GHz operating frequency
- Standard: 802.11b/g/n bands
- Supported smartphone systems: Android 4.4 or later iOS 9.3 or later
Operation Guide
Please scan this QR code to watch the step-by-step guiding video.
- Scan the QR code below or search ‘AIR.ai’ on App Store or Google Play and download it.
- Launch the AIR.ai App and log in to your account (sign up for your first use).
- Turn on the Bluetooth of your phone and connect your phone to your Wi-Fi.
- When the fireplace is plugged in, it will automatically enter Wi-Fi pairing mode. During this mode, the screen will flash ‘PO’, and pressing any buttons will exit the Wi-Fi pairing mode and switch the device to standby mode.
- The WiFi mode will automatically turn off after 60 seconds of inactivity. To reactivate the Wi-Fi pairing mode, press and hold the Timer Button for 5 seconds. The screen will continuously flash ‘PO’.
- Back to the AIR.ai App. Press the ‘+’ button in the top right corner. The App will search for the fireplace automatically. Press the ‘Go to add’ button to add your device.
- Choose your Wi-Fi (the one your phone is connected to) and enter the password. Press the ‘Next’ button to continue.
- The AIR.ai App starts connecting to your device. It may take some time, please wait patiently.
- Once you have set up the connection, you will find your fireplace in the device list. You can rename your device and get started now.
Note:
The fireplace WiFi cannot connect 2 mobile devices at the same time, but it
can be shared via the App with others after connecting one device.
To change the control mobile device, please delete it on the App in the
previous mobile device to set it back to default setting mode, then repeat
above connect steps on the new mobile device.
support@turbro.com
www.turbro.com
323-438-3334
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>