Ponovo K19 Wireless Microphone Instruction Manual
- June 17, 2024
- Ponovo
Table of Contents
Ponovo K19 Wireless Microphone
Product Information
Specifications:
- Product: Wireless Microphone K19
- Manual Language: English
- Customer Support Email: k19k19aa@163.com
- Warranty: 1 year from the date of purchase
Introduction :
Thank you for choosing our product! The Wireless Microphone K19 is a smart wireless microphone that provides professional-grade recording capabilities. It is a plug-and-play device that does not require any additional apps. This versatile microphone can be used for online live broadcasts, video Vlog shooting, program interviews, recordings, video teaching, and more. The wireless microphone system consists of two parts: a rechargeable Microphone Transmitter and a non-rechargeable Receiver.
Product Illustration:
(Microphone Transmitter)
- Mute switch
- Power switch
- Clip
- Microphone
- Indicator light of transmitter
- Charging port of transmitter
(Receiver)
-
Charging port of receiver
-
Port to connect the device (Type-C or Lightning port, depending
on your purchase) -
Indicator light of receiver
Product Usage Instructions
-
Step 1:
After unlocking the phone, connect the receiver to the phone with the appropriate port. The indication light of the receiver will flash.
Note: For Android phones from brands like Oppo, Vivo, IQOO, and Realme ensure to turn on the OTG function in the phone settings before connecting to the receiver. -
Step 2:
Press and hold the switch key of the microphone for 3 seconds to turn it on. The transmitter and receiver will automatically pair. A successful connection is indicated by the microphone’s blue light flashing slowly and the receiver’s blue light stays on. -
Step 3:
Clip the microphone receiver to your collar. Turn on your phone camera, live streaming app, or other recording software to start recording.
Special Note: To address low phone battery during usage, the receiver
does not require charging. If your phone runs low on power while recording, it
will be charged directly through the receiver’s port.
Note: It is recommended to fully charge both your phone and microphone
before live broadcasting or recording to avoid interruptions caused by
plugging or unplugging charging cables.
Frequently Asked Questions (FAQ):
-
Q: What should I do if I encounter compatibility issues with my phone and the microphone?
A: If you find that the type of microphone you purchased does not correspond to your phone’s port, please contact us at k19k19aa@163.com for a replacement. -
Q: How can I ensure a successful connection between the transmitter and receiver?
A: Press and hold the switch key on the microphone for 3 seconds to turn it on and allow automatic pairing between the transmitter and receiver. A successful connection is indicated by specific light patterns on both devices.
Customer support email：k19k19aa@163.com
Warm reminder
If you find that the type you purchased does not correspond to your phone, (for example you have the iPhone with a lightning port and accidentally bought the microphone with a TYPE-C port), you can contact us via email at k19k19aa@163.com or tell us within Amazon and we will replace it for you. We really want you to have a great shopping experience, so whatever other problems you may encounter, you can contact us to solve them!
Warranty and Service
Dear friends, If the product is damaged/broken, or you find it incompatible or can not record when using the microphone, you can first contact us to solve the problem. We will certainly provide you with a settlement in 24 hours (offer the solution or provide a refund/replacement) The warranty does not cover the loss of products due to the customer’s negligence.
Introduction
Thanks for choosing our product!
This product is a smart wireless microphone that provides professional-grade
recording. Plug and play, no app required Multiple uses: it can be used in
online live broadcasts, video Vlog shooting, program interviews, recording,
video teaching, and other occasions. The wireless Microphone consists of two
parts, one is a Microphone transmitter(Rechargeable), and the other one is a
receiver(No need to charge).
See as below picture:
Product illustration
- Mute switch
- Power switch
- Clip
- Microphone
- Indicator light of transmitter
- Charging port of transmitter
- Charging port of receiver
- Port to connect the device(Type-C or Lightning port, depending on your purchase)
- Indicator light of receiver
Steps of use
Step1:
- After unlocking the phone, connect the receiver to phone with port, the indication light of the receiver flashes
Note : For Android phones of brands such as oppo/vivo/iqoo/realm, turn on
the OTG function in the phone settings first before connecting to the
receiver.
(More on pages 10-11）
Step2:
- Press and hold the switch key of the microphone for 3 seconds to turn on, transmitter and receiver will automatically pair.
When the microphone’s blue light flashes slowly and the receiver’s blue light is always on, the connection is successful!
Step 3:
-
Clip the microphone receiver to your collar, turn on your phone camera, live streaming app or other software/apps to record the excitement!
-
It is recommended to wear the transmitter in the sound location between 10 ~ 20CM best
Special Note: If the phone runs out of battery?The receiver does not come
with an internal battery and does not need to be charged.
If the phone is running low on power while recording, the phone will be
charged directly through the receiver’s port.
Note : We recommend that you try to fully charge both your phone and
microphone before preparing to broadcast live or record video. (Because even
though charging the phone during recording is supported, plugging or
unplugging the charging cable may cause the recording to be interrupted for a
few seconds. (Some phones that require the OTG function to be enabled will
even require the OTG to be re-enabled again)
Operations and Indicator Light
Microphone Transmitter
Receiver
Warm Tips:
- Default: noise reduction(ON), reverb(OFF), Mute(OFF) , blue light blinks slowly.
- Click the Transmitter’s power switch once to turn noise reduction mode on/off
- Double-click the Transmitter’s power switch to turn the reverb mode on/off
- The noise reduction and reverb indicators are complex, you can refer to the following：
When Noise Reduction On，
Reverb(Off)： Blue light flashes slowly
Reverb(ON): Red and blue lights flash slowly
When Noise reduction is OFF，
- Reverb(Off)：Blue light always on
- Reverb(ON)： Red light flashes slowly
Specifications
Packing list
- 1*Microphone Transmitter
- 1*Receiver
- 1*Manual
Tips
Problems to be noted for connection
For Android phone
- Connect the receiver to the phone, but the light of the receiver does not light up. Because some phones require OTG to be enabled to connect to this mic(e.g. OPPO/VIVO/IQOO/Realme phones disable OTG by default). Search for [OTG] or [USB] in [Settings] and enable OTG. You can also search on Google or ask your dealer how to enable OTG according to your phone model.
- Some phones (e.g. OnePlus) can use the microphone when audio recording, but there is no sound during video recording. You can try setting your phone’s camera (example: [Settings] – [Sound and Vibration] – [Advanced Settings] – [Default Recorder] – [Add-On]) or ask your dealer to see if your phone supports external microphones. Of course, you can also Google according to your phone model: How to use an external microphone on xx phone.
- Some phones do not support external microphones due to system reasons, you can download the [Open Camera] software, open [Open Camera] – [Settings] -[Video Settings] – [Audio Source] – [External Microphone] to fix it. You can also search for “phone can’t connect to the external microphone” on Google or YouTube depending on your phone model to solve the problem.
For iPhone/iPad
- Not compatible with the USB-C iPad series
- If the device cannot be matched, please upgrade your phone to the latest version and exit all open programs, and restart the device.
- If you find that it is not compatible, you can also search Google or YouTube for “iPhones can’t connect to microphone” to solve the problem
If this microphone still does not work after trying the above, you can contact us and we will provide you with a solution or refund.
How to make the sound more clear?
- Because this microphone is for omnidirectional live broadcast, it is not professional-grade studio equipment, although it has a built-in noise reduction function because it picks up a lot of sounds, it will occasionally be a bit noisy due to environmental problems, you can use the software post-production to remove them
- You can use it with the following points in mind to avoid noise.
- a. Keep the microphone at least 18 cm/7 inches away from the sound source to avoid popping
- b. Keep away from sources of noise (e.g. fans, air conditioners, refrigerators, clothes rubbing)
- c. Keep the microphone relatively still during the performance to reduce noise
- The main advantage of the microphone is that it can record from a greater distance than a mobile phone
How to pause the recording?
Slide the mute button up while recording to pause the recording, and continue
recording by sliding the mute button down.
- The microphone is only recording, can not amplify the sound, and can not store the sound
- It is recommended not to use headphones, because the headphones may occupy the microphone input