BesMirror B0BPH3B74D 40×24 Inch LED Bathroom Mirror User Manual
- May 15, 2024
- BesMirror
Table of Contents
BesMirror B0BPH3B74D 40×24 Inch LED Bathroom Mirror
OPERATION MANUAL
SPECIFICATIONS
- LED bathroom mirror
- Main material: Glass/Aluminum
- Input: AC 100-120V 50-60Hz
- 3 color: Warm white, Neutral white, Cool white
- Stepless dimming: Yes
- Memory function: Yes
- Anti-fog: Auto stop in 1 hour
- Installation: Horizontal/Vertical Wall Mounted
TOOLS REQUIRED
PARTS INCLUDED
ELECTRIC CONNECTIONS
ALL WIRING SHOULD BE DONE BY A QUALIFIED LICENCED ELECTRICIAN
WARNING
Shut off power before wiring the mirror.
WARNING
An Electrical option mirror must be wired to a 20 Amp GFl(Ground Fault
Interrupter) protected circuit when used in bathrooms and all other locations
required by the National Electric Code.
CAUTION
Requires 120 VAC 20 Amp GFI protected circuit.
INSTALLATION INSTRUCTIONS
-
Locate the centerline and top edge that mirror will be mounted.
-
Adopt the hanging template to locate the drilling holes, and use the level tool to make sure it is horizontally placed.
-
Drill holes and install the mounting bracket.
-
Hang the mirror on the mounting bracket, and plug in the socket.
WARNING: Mounting bracket must be attached to furring strip/channel or wall stud.
OPERATION GUIDE
How to use this switch
- Tap the power switch to turn on/off the LED lights.
- Long press the power switch to dim or brighten them.
Memory function saves your last brightness.
Tap the color temperature switch to select warm white, neutral white or cool white as you need.
The memory function saves the last color.
Tap the anti-fog switch to turn on/off the defogger function. (White light: function on; No light: function off)
Maintenance
- Make sure that LED lights are OFF before cleaning!
- Use a soft wet cloth to remove dirt and stains. Wipe with dry cloth afterwards.
- You can use a velvet cloth for better result in cleaning (velvet cloth not included)
- Do not use any abrasive material as it may damage the surface and finish of the mirror.
- A mild detergent may be used to clean the surface of the mirror.
- Spray detergent on the cloth instead of the surface of the mirror when cleaning.
NOTICE
To reduce the risk of burns, fire, electric shock or injury to persons. Use
this furnishing only for its intended use as described in these instructions.
Do not use attachments not recommended by the manufacturer. Never drop or
insert any object into any opening. Do not use outdoors.
- Please read this manual carefully before using the product.
- Follow all local building, electrical, and plumbing codes.
- Do not disassemble or refit the products by yourself.
- Handle with care during installation or moving.
- Turn off the power before cleaning. The surface of the mirror should be cleaned with glass cleaner.
- Turn off the power and avoid direct sunlight if not used or stored for a long time.
- Do not approach or put the product into the fire in case of fire or explosion.
- Stop using it immediately if an abnormal condition occurs.
- Please save these instructions for future reference.
- Your advice are highly welcomed for us to improve the product.
Feel free to contact us
Email: beautymirror68@outlook.com
WARRANTY
Warranty Card
- NAME TEL
- ADD
- MODEL ORDER NO
- DATE
- Failure Description